Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Visible and ultraviolet integrated photonics for addressing atomic systems

Gavin N. West

Published Jan 1, 2019• 1 citation
OpenAlex

Abstract

In the wake of many technological successes in integrated photonics based on silicon, attention has been given to applications in the visible light regime.This thesis is concerned with furthering the development of integrated photonics for controlling atomic systems, in particular individual trapped atomic ions.Nature places strict constraints on the frequency of the lasers used to address these atoms, typically spanning from the ultraviolet into the near infrared, and on the sensitivity to accidental perturbations from the control hardware.A platform for broadband integrated photonics, using amorphous aluminum oxide as the patterned material, is developed and exhibits suitable performance in the visible and ultraviolet.The waveguide loss and resonator quality factors are the best which have been reported to date, for wavelengths shorter than 500 nm.Next, a theory is developed which proposes laser frequency noise as a limiting factor for the extinction ratio of common integrated modulator designs.Understanding of this limit, and possible methods to suppress its effects, is important due to the fragile nature of single-photon-sensitive quantum systems.Finally, the application of technology developed here is applied to the analysis of trapped-ion-based optical atomic clocks.Justification for such integration of clocks and the impacts that result -both good and bad -are discussed from the perspective of a hardware designer.

Related papers

Integrated photonics for scalable quantum systems: from UV nanophotonics to trapped-ion architectures

Rangana Banerjee Chaudhuri, Carl-Frederik Grimpe, Fatemeh Salahshoori +5 more

Photonic integrated circuits (PICs) offer compact and scalable solutions for trapped-ion quantum technologies. This work demonstrates photonic platforms that promise the potential integration of photonic components for light delivery and control across ultraviolet (UV) to near-infrared (NIR) wavelengths. Passive waveguides and beam-shaping structures provide precise and stable optical addressing of ions, while active elements such as modulators and switches enable dynamic, on-chip control for quantum operations. Materials like aluminum oxide (Al2O3) and aluminum nitride (AlN) are evaluated to illustrate how functionality can be tailored to spectral needs. These integrated photonic systems reduce reliance on bulky free-space optics, improve alignment stability, and support future development of compact quantum sensors, atomic clocks, and scalable quantum processors.

Integrated Optics: Devices, Materials, and Technologies•Mar 4, 2026•0 citations

Ultra-low loss visible light waveguides for integrated atomic, molecular, and quantum photonics

Nitesh Chauhan, Jiawei Wang, Debapam Bose +5 more

Atomic, molecular and optical (AMO) visible light systems are the heart of precision applications including quantum, atomic clocks and precision metrology. As these systems scale in terms of number of lasers, wavelengths, and optical components, their reliability, space occupied, and power consumption will push the limits of using traditional laboratory-scale lasers and optics. Visible light photonic integration is critical to advancing AMO based sciences and applications, yet key performance aspects remain to be addressed, most notably waveguide losses and laser phase noise and stability. Additionally, a visible light integrated solution needs to be wafer-scale CMOS compatible and capable of supporting a wide array of photonic components. While the regime of ultra-low loss has been achieved at telecommunication wavelengths, progress at visible wavelengths has been limited. Here, we report the lowest waveguide losses and highest resonator Qs to date in the visible range, to the best of our knowledge. We report waveguide losses at wavelengths associated with strontium transitions in the 461 nm to 802 nm wavelength range, of 0.01 dB/cm to 0.09 dB/cm and associated intrinsic resonator Q of 60 Million to 9.5 Million, a decrease in loss by factors of 6x to 2x and increase in Q by factors of 10x to 1.5x over this visible wavelength range. Additionally, we measure an absorption limited loss and Q of 0.17 dB/m and 340 million at 674 nm. This level of performance is achieved in a wafer-scale foundry compatible Si 3 N 4 platform with a 20 nm thick core and TEOS-PECVD deposited upper cladding oxide, and enables waveguides for different wavelengths to be fabricated on the same wafer with mask-only changes per wavelength. These results represent a significant step forward in waveguide platforms that operate in the visible, opening up a wide range of integrated applications that utilize atoms, ions and molecules including sensing, navigation, metrology and clocks.

Optics Express•Jan 27, 2022•92 citations

Enhanced trapped-ion quantum control in foundry-fabricated integrated devices

Aditya Milind Kolhatkar, Vighnesh Natarajan, Hamim Mahmud Rivy +3 more

Integrated optical control of trapped-ion qubits leveraging dielectric waveguides photonics within planar-fabricated trap devices offers routes to scaling the optical control critical to trapped-ion quantum computing. The ultraviolet to infrared functionality required for many atomic systems, the multiple metal layers for large-scale trap arrays, and the long-term interest in integration of active functionality and integrated electronics motivates development of foundry-based platforms for such systems, to facilitate accessibility to the complex fabrication involved. Aside from scaling, utilization of such technology in trapped-ion quantum systems further stands to alleviate limitations on basic physical operations employed in both quantum computing and metrology, which experiments are starting to demonstrate. I will summarize our recent results using phase-stable standing-wave delivery practically enabled by integrated photonic addressing to enhance ground-state laser cooling, which we experimentally demonstrate using trap devices with integrated Al2O3 and Si3N4 waveguides for UV-NIR addressing fabricated in a commercial foundry. I will also discuss relevance of similar ideas to alleviating power requirements in laser-based entangling gates, and work in progress towards experimental realization, including in a 300 mm-wafer foundry platform for such devices in development.

SPIE Quantum Information Science, Sensing, and Computation•Jun 12, 2026•0 citations

Photon generation in ultraviolet integrated photonic circuits

Michael L. Fanto, Christopher C. Tison, Michael L. Fanto

Quantum information processing relies on the fundamental property of quantum interference, where the quality of the interference directly correlates to the indistinguishability of the interacting particles. The creation of these indistinguishable particles, photons in this case, has conventionally been accomplished with nonlinear crystals and optical filters to remove spectral distinguishability, albeit sacrificing the number of photons. This research describes the use of an integrated aluminum nitride microring resonator circuit to selectively generate photon pairs at the narrow cavity transmissions, thereby producing spectrally indistinguishable photons in the ultraviolet regime to interact with trapped ion quantum memories. The spectral characteristics of these photons must be carefully controlled for two reasons: (i) interference quality depends on the spectral indistinguishability, and (ii) the wavelength must be strictly controlled to interact with atomic transitions. The specific ion of interest for these trapped ion quantum memories is Ytterbium which has a transition at 369.5 nm with 12.5 GHz offset levels. Ytterbium ions serve as very long lived and stable quantum memories with storage times on the order of 10’s of minutes, compared with photonic quantum memories which are limited to 10-6 to 10-3 seconds. The combination of the long-lived atomic memory, integrated photonic circuitry, and the photonic quantum bits are necessary to produce the first quantum information processors. In this seminar, I will present results on ultraviolet wavelength operation, dispersion analysis, propagation loss in aluminum nitride waveguides, and the path forward to towards multiwavelength integration.

Photonics for Quantum (PfQ)•Aug 27, 2021•0 citations

Scalable photonic integrated circuits for high-fidelity light control

Adrian J. Menssen, Artur Hermans, Ian Christen +10 more

Advances in laser technology have driven discoveries in atomic, molecular, and optical (AMO) physics and emerging applications, from quantum computers with cold atoms or ions, to quantum networks with solid-state color centers. This progress is motivating the development of a new generation of optical control systems that can manipulate the light field with high fidelity at wavelengths relevant for AMO applications. These systems are characterized by criteria: (C1) operation at a design wavelength of choice in the visible (VIS) or near-infrared (IR) spectrum, (C2) a scalable platform that can support large channel counts, (C3) high-intensity modulation extinction and (C4) repeatability compatible with low gate errors, and (C5) fast switching times. Here, we provide a pathway to address these challenges by introducing an atom control architecture based on VIS-IR photonic integrated circuit (PIC) technology. Based on a complementary metal–oxide–semiconductor fabrication process, this atom-control PIC (APIC) technology can meet system requirements (C1)–(C5). As a proof of concept, we demonstrate a 16-channel silicon-nitride-based APIC with (5.8±0.4)ns response times and >30dB extinction ratio at a wavelength of 780 nm.

arXiv:2210.03100•Optica•Sep 5, 2023•34 citations

An integrated photonic engine for programmable atomic control

Ian Christen, Thomas Propson, Madison Sutula +12 more

Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.

arXiv:2208.06732•Nature Communications•Jan 2, 2025•53 citations
In the wake of many technological successes in integrated photonics based on silicon, attention has been given to applications in the visible light regime.This thesis is concerned with furthering the development of integrated photonics for controlling atomic systems, in particular individual trapped atomic ions.Nature places strict constraints on the frequency of the lasers used to address these atoms, typically spanning from the ultraviolet into the near infrared, and on the sensitivity to accidental perturbations from the control hardware.A platform for broadband integrated photonics, using amorphous aluminum oxide as the patterned material, is developed and exhibits suitable performance in the visible and ultraviolet.The waveguide loss and resonator quality factors are the best which have been reported to date, for wavelengths shorter than 500 nm.Next, a theory is developed which proposes laser frequency noise as a limiting factor for the extinction ratio of common integrated modulator designs.Understanding of this limit, and possible methods to suppress its effects, is important due to the fragile nature of single-photon-sensitive quantum systems.Finally, the application of technology developed here is applied to the analysis of trapped-ion-based optical atomic clocks.Justification for such integration of clocks and the impacts that result -both good and bad -are discussed from the perspective of a hardware designer.
Photonic integrated circuits (PICs) offer compact and scalable solutions for trapped-ion quantum technologies. This work demonstrates photonic platforms that promise the potential integration of photonic components for light delivery and control across ultraviolet (UV) to near-infrared (NIR) wavelengths. Passive waveguides and beam-shaping structures provide precise and stable optical addressing of ions, while active elements such as modulators and switches enable dynamic, on-chip control for quantum operations. Materials like aluminum oxide (Al2O3) and aluminum nitride (AlN) are evaluated to illustrate how functionality can be tailored to spectral needs. These integrated photonic systems reduce reliance on bulky free-space optics, improve alignment stability, and support future development of compact quantum sensors, atomic clocks, and scalable quantum processors.
Atomic, molecular and optical (AMO) visible light systems are the heart of precision applications including quantum, atomic clocks and precision metrology. As these systems scale in terms of number of lasers, wavelengths, and optical components, their reliability, space occupied, and power consumption will push the limits of using traditional laboratory-scale lasers and optics. Visible light photonic integration is critical to advancing AMO based sciences and applications, yet key performance aspects remain to be addressed, most notably waveguide losses and laser phase noise and stability. Additionally, a visible light integrated solution needs to be wafer-scale CMOS compatible and capable of supporting a wide array of photonic components. While the regime of ultra-low loss has been achieved at telecommunication wavelengths, progress at visible wavelengths has been limited. Here, we report the lowest waveguide losses and highest resonator Qs to date in the visible range, to the best of our knowledge. We report waveguide losses at wavelengths associated with strontium transitions in the 461 nm to 802 nm wavelength range, of 0.01 dB/cm to 0.09 dB/cm and associated intrinsic resonator Q of 60 Million to 9.5 Million, a decrease in loss by factors of 6x to 2x and increase in Q by factors of 10x to 1.5x over this visible wavelength range. Additionally, we measure an absorption limited loss and Q of 0.17 dB/m and 340 million at 674 nm. This level of performance is achieved in a wafer-scale foundry compatible Si 3 N 4 platform with a 20 nm thick core and TEOS-PECVD deposited upper cladding oxide, and enables waveguides for different wavelengths to be fabricated on the same wafer with mask-only changes per wavelength. These results represent a significant step forward in waveguide platforms that operate in the visible, opening up a wide range of integrated applications that utilize atoms, ions and molecules including sensing, navigation, metrology and clocks.
Integrated optical control of trapped-ion qubits leveraging dielectric waveguides photonics within planar-fabricated trap devices offers routes to scaling the optical control critical to trapped-ion quantum computing. The ultraviolet to infrared functionality required for many atomic systems, the multiple metal layers for large-scale trap arrays, and the long-term interest in integration of active functionality and integrated electronics motivates development of foundry-based platforms for such systems, to facilitate accessibility to the complex fabrication involved. Aside from scaling, utilization of such technology in trapped-ion quantum systems further stands to alleviate limitations on basic physical operations employed in both quantum computing and metrology, which experiments are starting to demonstrate. I will summarize our recent results using phase-stable standing-wave delivery practically enabled by integrated photonic addressing to enhance ground-state laser cooling, which we experimentally demonstrate using trap devices with integrated Al2O3 and Si3N4 waveguides for UV-NIR addressing fabricated in a commercial foundry. I will also discuss relevance of similar ideas to alleviating power requirements in laser-based entangling gates, and work in progress towards experimental realization, including in a 300 mm-wafer foundry platform for such devices in development.
Quantum information processing relies on the fundamental property of quantum interference, where the quality of the interference directly correlates to the indistinguishability of the interacting particles. The creation of these indistinguishable particles, photons in this case, has conventionally been accomplished with nonlinear crystals and optical filters to remove spectral distinguishability, albeit sacrificing the number of photons. This research describes the use of an integrated aluminum nitride microring resonator circuit to selectively generate photon pairs at the narrow cavity transmissions, thereby producing spectrally indistinguishable photons in the ultraviolet regime to interact with trapped ion quantum memories. The spectral characteristics of these photons must be carefully controlled for two reasons: (i) interference quality depends on the spectral indistinguishability, and (ii) the wavelength must be strictly controlled to interact with atomic transitions. The specific ion of interest for these trapped ion quantum memories is Ytterbium which has a transition at 369.5 nm with 12.5 GHz offset levels. Ytterbium ions serve as very long lived and stable quantum memories with storage times on the order of 10’s of minutes, compared with photonic quantum memories which are limited to 10-6 to 10-3 seconds. The combination of the long-lived atomic memory, integrated photonic circuitry, and the photonic quantum bits are necessary to produce the first quantum information processors. In this seminar, I will present results on ultraviolet wavelength operation, dispersion analysis, propagation loss in aluminum nitride waveguides, and the path forward to towards multiwavelength integration.
Advances in laser technology have driven discoveries in atomic, molecular, and optical (AMO) physics and emerging applications, from quantum computers with cold atoms or ions, to quantum networks with solid-state color centers. This progress is motivating the development of a new generation of optical control systems that can manipulate the light field with high fidelity at wavelengths relevant for AMO applications. These systems are characterized by criteria: (C1) operation at a design wavelength of choice in the visible (VIS) or near-infrared (IR) spectrum, (C2) a scalable platform that can support large channel counts, (C3) high-intensity modulation extinction and (C4) repeatability compatible with low gate errors, and (C5) fast switching times. Here, we provide a pathway to address these challenges by introducing an atom control architecture based on VIS-IR photonic integrated circuit (PIC) technology. Based on a complementary metal–oxide–semiconductor fabrication process, this atom-control PIC (APIC) technology can meet system requirements (C1)–(C5). As a proof of concept, we demonstrate a 16-channel silicon-nitride-based APIC with (5.8±0.4)ns response times and >30dB extinction ratio at a wavelength of 780 nm.
Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.