Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature Communications

Coulomb-driven single defect engineering for scalable qubits and spin sensors in diamond

Tobias Lühmann, Roger John, Ralf Wunderlich, Jan Meijer, Sébastien Pezzagna

Published Oct 31, 2019• 135 citations
Publisher

Abstract

Abstract Qubits based on colour centres in diamond became a prominent system for solid-state quantum information processing and sensing. But the deterministic creation of qubits and the control of their environment are still critical issues, preventing the development of a room-temperature quantum computer. We report on the high creation yield of NV centres of 75% (a tenfold enhancement) by charge-assisted defect engineering, together with an improvement of their spin coherence. The method strongly favours the formation and negative charge state of the NV centres with respect to intrinsic diamond, while it hinders the formation of competing and perturbing defects such as di-vacancies or NVH complexes. We evidence spectrally the charge state tuning of the implantation-induced vacancies from V0 to V−, key element of this Coulomb-driven engineering. The generality of the method is demonstrated using several donors (phosphorous, oxygen and sulphur) and applying it to other centres (SnV and MgV) in diamond.

DOI
10.1038/s41467-019-12556-0

Related papers

Charge‐Assisted Engineering of Color Centers in Diamond

Tobias Lühmann, Jan Meijer, Sébastien Pezzagna

Owing to its unique optical and spin properties, the nitrogen‐vacancy (NV) center holds the promise of a diamond‐based room‐temperature scalable quantum computer, but the numerous technical and physical issues are not yet overcome, especially the poor N to NV conversion. The NV and other color centers are, however, successfully used as multitasking quantum sensors, and open new routes in quantum sensing technologies. Most recently, several breakthroughs and demonstrations were achieved, shedding a new light on the feasibility of a NV‐based quantum computer. Herein, the recently developed method of charge‐assisted single defect engineering is reviewed. With a controlled charging of the involved species, it modifies the diffusion or kinetics of defect formation and acts as a catalyzer of the NV creation while hindering the formation of competing and perturbing defects such as divacancies or NVH. Very high NV creation yields up to 75% are obtained and the method is suitable to other impurity‐vacancy defects. Furthermore, it has positive consequences on the charge state stability and coherence time of the NV centers, which is as well discussed. Together with the possibility to nowadays deterministically implant single ions, this powerful method brings the scalability of NV qubits closer.

physica status solidi (a)•Jan 15, 2021•37 citations

Charge‐Assisted Engineering of Color Centers in Diamond

Tobias Lühmann, Jan Meijer, Sébastien Pezzagna

Charge-Assisted Engineering The recently developed method of charge-assisted single defect engineering brings the full scalability of solid-state qubits or quantum sensors closer. Applied to colour centres in diamond (NV, SnV, MgV,…), it enables a strong enhancement of their creation yield and of their properties such as charge-state stability or spin coherence times. More details can be found in article number 2000614 by Sébastien Pezzagna and co-workers.

physica status solidi (a)•Mar 1, 2021•6 citations

Tailoring spin defects in diamond by lattice charging

Felipe Fávaro de Oliveira, Denis Antonov, Ya Wang +6 more

Atomic-size spin defects in solids are unique quantum systems. Most applications require nanometre positioning accuracy, which is typically achieved by low-energy ion implantation. A drawback of this technique is the significant residual lattice damage, which degrades the performance of spins in quantum applications. Here we show that the charge state of implantation-induced defects drastically influences the formation of lattice defects during thermal annealing. Charging of vacancies at, for example, nitrogen implantation sites suppresses the formation of vacancy complexes, resulting in tenfold-improved spin coherence times and twofold-improved formation yield of nitrogen-vacancy centres in diamond. This is achieved by confining implantation defects into the space-charge layer of free carriers generated by a boron-doped diamond structure. By combining these results with numerical calculations, we arrive at a quantitative understanding of the formation and dynamics of the implanted spin defects. These results could improve engineering of quantum devices using solid-state systems.

arXiv:1701.07055•Nature Communications•May 17, 2017•133 citations

Bottom-up fabrication of scalable room-temperature diamond quantum computing and sensing technologies

Lachlan M. Oberg, Cédric Weber, Hung‐Hsiang Yang +6 more

Abstract The nitrogen-vacancy (NV) centre in diamond is a premier solid-state defect for quantum information processing and metrology. An integrated diamond quantum device harnesses the collective properties of multiple NV centres, enabling room-temperature quantum computing and sensing. While large-scale devices are poised to fill an important gap in the burgeoning quantum technology landscape, their practical realisation has not been achieved using current top-down fabrication techniques such as ion implantation. Consequently, this necessitates the development of a bottom-up fabrication technique, which is scalable, deterministic, and possesses atomic-scale precision. Informed by existing methods for fabricating phosphorous defect qubits in silicon, we envision a hydrogen depassivation lithography technique for atomically-precise manufacturing of nitrogen-vacancy centres in diamond. This perspective article outlines a viable multi-step procedure for realising scalable fabrication of diamond quantum devices and identifies the key challenges in its development.

Materials for Quantum Technology•Jun 10, 2025•11 citations

Identification and Creation of the Room-Temperature Coherently Controllable ST1 Spin Center in Diamond

Tobias Lühmann, S. Diziain, Jan Meijer +1 more

Among hundreds of optically active solid-state defects, very few of them hold the promise of spin qubits coherently operating at room temperature. Besides the prominent nitrogen-vacancy (NV) center in diamond, the more recently discovered ST1 center possesses advantageous electronic and spin properties such as a spin-free ground state and a large spin readout contrast (>50%) at 300 K. However, because of its unknown nature, the ST1 center was never created on demand or computed theoretically. Here, we show that both oxygen and the lattice vacancy are constituents of the ST1 center. The involvement of oxygen is unambiguously proved from two independent experiments conducted on two different samples. The creation efficiency of ST1 at 1200 °C annealing is about 10 –5 for oxygen implantation of energy 6–50 keV. The addition of vacancies followed by a thermal treatment activate further oxygen into ST1 centers, as it does for native nitrogen into NV centers. Possible ST1 configurations are discussed. The ST1 creation competes with the likely more efficient formation of OV and OVH defects. The controlled fabrication of ST1 and NV centers opens up the way to scalable room-temperature hybrid qubit systems and universal nuclear spin gates.

ACS Photonics•Apr 27, 2022•15 citations

Engineering of NV color centers in diamond for their applications in quantum information and magnetometry

Margarita Lesik

The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.

•Mar 3, 2015•4 citations
Abstract Qubits based on colour centres in diamond became a prominent system for solid-state quantum information processing and sensing. But the deterministic creation of qubits and the control of their environment are still critical issues, preventing the development of a room-temperature quantum computer. We report on the high creation yield of NV centres of 75% (a tenfold enhancement) by charge-assisted defect engineering, together with an improvement of their spin coherence. The method strongly favours the formation and negative charge state of the NV centres with respect to intrinsic diamond, while it hinders the formation of competing and perturbing defects such as di-vacancies or NVH complexes. We evidence spectrally the charge state tuning of the implantation-induced vacancies from V0 to V−, key element of this Coulomb-driven engineering. The generality of the method is demonstrated using several donors (phosphorous, oxygen and sulphur) and applying it to other centres (SnV and MgV) in diamond.
Owing to its unique optical and spin properties, the nitrogen‐vacancy (NV) center holds the promise of a diamond‐based room‐temperature scalable quantum computer, but the numerous technical and physical issues are not yet overcome, especially the poor N to NV conversion. The NV and other color centers are, however, successfully used as multitasking quantum sensors, and open new routes in quantum sensing technologies. Most recently, several breakthroughs and demonstrations were achieved, shedding a new light on the feasibility of a NV‐based quantum computer. Herein, the recently developed method of charge‐assisted single defect engineering is reviewed. With a controlled charging of the involved species, it modifies the diffusion or kinetics of defect formation and acts as a catalyzer of the NV creation while hindering the formation of competing and perturbing defects such as divacancies or NVH. Very high NV creation yields up to 75% are obtained and the method is suitable to other impurity‐vacancy defects. Furthermore, it has positive consequences on the charge state stability and coherence time of the NV centers, which is as well discussed. Together with the possibility to nowadays deterministically implant single ions, this powerful method brings the scalability of NV qubits closer.
Atomic-size spin defects in solids are unique quantum systems. Most applications require nanometre positioning accuracy, which is typically achieved by low-energy ion implantation. A drawback of this technique is the significant residual lattice damage, which degrades the performance of spins in quantum applications. Here we show that the charge state of implantation-induced defects drastically influences the formation of lattice defects during thermal annealing. Charging of vacancies at, for example, nitrogen implantation sites suppresses the formation of vacancy complexes, resulting in tenfold-improved spin coherence times and twofold-improved formation yield of nitrogen-vacancy centres in diamond. This is achieved by confining implantation defects into the space-charge layer of free carriers generated by a boron-doped diamond structure. By combining these results with numerical calculations, we arrive at a quantitative understanding of the formation and dynamics of the implanted spin defects. These results could improve engineering of quantum devices using solid-state systems.
Abstract The nitrogen-vacancy (NV) centre in diamond is a premier solid-state defect for quantum information processing and metrology. An integrated diamond quantum device harnesses the collective properties of multiple NV centres, enabling room-temperature quantum computing and sensing. While large-scale devices are poised to fill an important gap in the burgeoning quantum technology landscape, their practical realisation has not been achieved using current top-down fabrication techniques such as ion implantation. Consequently, this necessitates the development of a bottom-up fabrication technique, which is scalable, deterministic, and possesses atomic-scale precision. Informed by existing methods for fabricating phosphorous defect qubits in silicon, we envision a hydrogen depassivation lithography technique for atomically-precise manufacturing of nitrogen-vacancy centres in diamond. This perspective article outlines a viable multi-step procedure for realising scalable fabrication of diamond quantum devices and identifies the key challenges in its development.
Among hundreds of optically active solid-state defects, very few of them hold the promise of spin qubits coherently operating at room temperature. Besides the prominent nitrogen-vacancy (NV) center in diamond, the more recently discovered ST1 center possesses advantageous electronic and spin properties such as a spin-free ground state and a large spin readout contrast (>50%) at 300 K. However, because of its unknown nature, the ST1 center was never created on demand or computed theoretically. Here, we show that both oxygen and the lattice vacancy are constituents of the ST1 center. The involvement of oxygen is unambiguously proved from two independent experiments conducted on two different samples. The creation efficiency of ST1 at 1200 °C annealing is about 10 –5 for oxygen implantation of energy 6–50 keV. The addition of vacancies followed by a thermal treatment activate further oxygen into ST1 centers, as it does for native nitrogen into NV centers. Possible ST1 configurations are discussed. The ST1 creation competes with the likely more efficient formation of OV and OVH defects. The controlled fabrication of ST1 and NV centers opens up the way to scalable room-temperature hybrid qubit systems and universal nuclear spin gates.
The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.