Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Sciences

Stabilization of Transverse Modes for a High Finesse Near-Unstable Cavity

Jianji Liu, Jiachen Liu, Zhixiang Li, Ping Yu, Guoquan Zhang

Published Oct 28, 2019• 6 citations
Publisher

Abstract

We develop a method to lock a high-finesse near-unstable Fabry–Perot (FP) cavity (F = 7330) to a frequency stable dye laser operating at 605.78 nm using the Pound–Drever–Hall technique. The experimental results show the feasibility of locking this cavity to different transverse modes. This method links the external FP cavity to the dye laser cavity, and a 379 kHz final linewidth of the FP cavity is achieved. Such a near-unstable cavity is potentially useful for cavity-enhanced spontaneous parametric down-conversion to generate narrow-band single photon or photon pairs in different transverse modes.

DOI
10.3390/app9214580

Related papers

High-finesse fiber Fabry–Perot cavities: stabilization and mode matching analysis

J. Gallego, S. Ghosh, Seyed Khalil Alavi +4 more

Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.

arXiv:1508.05289•Applied Physics B•Mar 1, 2016•79 citations

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations

Spectral filtering of dual lasers with a high-finesse length-tunable cavity for rubidium atom Rydberg excitation*

Yangyang Liu, Zhuo Fu, Peng Xu +3 more

We propose and demonstrate an alternative method for spectral filtering and frequency stabilization of both 780-nm and 960-nm lasers using a high-finesse length-tunable cavity (HFLTC). Firstly, the length of HFLTC is stabilized to a commercial frequency reference. Then, the two lasers are locked to this HFLTC using the Pound–Drever–Hall (PDH) method which can narrow the linewidths and stabilize the frequencies of both lasers simultaneously. Finally, the transmitted lasers of HFLTC with each power up to about 100 μW, which act as seed lasers, are amplified using the injection locking method for single-atom Rydberg excitation. The linewidths of obtained lasers are narrowed to be less than 1 kHz, meanwhile the obtained lasers’ phase noise around 750 kHz are suppressed about 30 dB. With the spectrally filtered lasers, we demonstrate a Rabi oscillation between the ground state and Rydberg state of single-atoms in an optical trap tweezer with a decay time of (67 ± 37) μs, which is almost not affected by laser phase noise. We found that the maximum short-term laser frequency fluctuation of a single excitation lasers is at ∼3.3 kHz and the maximum long-term laser frequency drift of a single laser is ∼46 kHz during one month. Our work develops a stable and repeatable method to provide multiple laser sources of ultra-low phase noise, narrow linewidth, and excellent frequency stability, which is essential for high precision atomic experiments, such as neutral atom quantum computing, quantum simulation, quantum metrology, and so on.

Chinese Physics B•Apr 19, 2021•5 citations

Injection-locked diode laser current modulation for Pound-Drever-Hall frequency stabilization using transfer cavities

Chelsea E. Liekhus-Schmaltz, R. Mantifel, Mozhgan Torabifard +2 more

A phase-modulated RF current source is applied to an injection-locked diode laser operating at 780 nm. This produces tunable phase-modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity using the Pound-Drever-Hall technique. The Pound-Drever-Hall signal is antisymmetric about the lock point, despite the presence of significant diode laser amplitude modulation. The stabilized optical transfer cavity is used to frequency stabilize a 776 nm external cavity diode laser. The stability and tunability of this transfer cavity locked laser is established by observation of the hyperfine components of the Rb875P3/2−5D5/2 transition in a vapor cell.

arXiv:1109.0338•Journal of the Optical Society of America B•May 22, 2012•14 citations

A fast-tunable and stable fiber microcavity for coupling Ba+ ions in quantum networks

Fang Ding, Chenghao Zhang, Weibin Chen +4 more

We present the design, implementation, and characterization of a high-stability, fast-tunable fiber Fabry-Pérot microcavity system optimized for coupling with Ba + ions to form quantum network nodes.The microcavity system integrates multiwavelength single-mode transmission, rapid and broad-band tunability, high finesse, and exceptional passive mechanical stability.By incorporating a unique vibration isolation structure, the system enables the fiber-optic microcavity (with a finesse of 8000) to remain resonant with the laser for several minutes even without active feedback.Furthermore, we demonstrate active cavity length stabilization using the Pound-Drever-Hall method, which significantly suppresses low-frequency vibrations and enables the cavity length to remain stable for several days.Experimental results show that this fiber microcavity system offers outstanding stability and flexibility for practical quantum network applications, providing reliable technical support for the construction of large-scale quantum networks based on trapped ions.

Chinese Optics Letters•Jan 1, 2025•3 citations

Frequency doubling and stabilization of a Tm,Ho:YLF laser at 2051 nm to a high finesse optical cavity

Adam Kleczewski, Matthew Hoffman, Eric Magnuson +2 more

Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall (PDH) method. A two channel feedback circuit allows for laser frequency stabilization with a bandwidth of 2 MHz. This laser system has been used to drive the 6S1/2 to 5D3/2 transition in 138Ba+, where a 2 ms laser-ion coherence times has been observed, demonstrating a linewidth of less than 500 Hz. The intensity noise of this system is analyzed and found to be acceptable for several proposed experiments on a single trapped barium ion.

arXiv:1105.4400•May 23, 2011•1 citation
We develop a method to lock a high-finesse near-unstable Fabry–Perot (FP) cavity (F = 7330) to a frequency stable dye laser operating at 605.78 nm using the Pound–Drever–Hall technique. The experimental results show the feasibility of locking this cavity to different transverse modes. This method links the external FP cavity to the dye laser cavity, and a 379 kHz final linewidth of the FP cavity is achieved. Such a near-unstable cavity is potentially useful for cavity-enhanced spontaneous parametric down-conversion to generate narrow-band single photon or photon pairs in different transverse modes.
Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.
We propose and demonstrate an alternative method for spectral filtering and frequency stabilization of both 780-nm and 960-nm lasers using a high-finesse length-tunable cavity (HFLTC). Firstly, the length of HFLTC is stabilized to a commercial frequency reference. Then, the two lasers are locked to this HFLTC using the Pound–Drever–Hall (PDH) method which can narrow the linewidths and stabilize the frequencies of both lasers simultaneously. Finally, the transmitted lasers of HFLTC with each power up to about 100 μW, which act as seed lasers, are amplified using the injection locking method for single-atom Rydberg excitation. The linewidths of obtained lasers are narrowed to be less than 1 kHz, meanwhile the obtained lasers’ phase noise around 750 kHz are suppressed about 30 dB. With the spectrally filtered lasers, we demonstrate a Rabi oscillation between the ground state and Rydberg state of single-atoms in an optical trap tweezer with a decay time of (67 ± 37) μs, which is almost not affected by laser phase noise. We found that the maximum short-term laser frequency fluctuation of a single excitation lasers is at ∼3.3 kHz and the maximum long-term laser frequency drift of a single laser is ∼46 kHz during one month. Our work develops a stable and repeatable method to provide multiple laser sources of ultra-low phase noise, narrow linewidth, and excellent frequency stability, which is essential for high precision atomic experiments, such as neutral atom quantum computing, quantum simulation, quantum metrology, and so on.
A phase-modulated RF current source is applied to an injection-locked diode laser operating at 780 nm. This produces tunable phase-modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity using the Pound-Drever-Hall technique. The Pound-Drever-Hall signal is antisymmetric about the lock point, despite the presence of significant diode laser amplitude modulation. The stabilized optical transfer cavity is used to frequency stabilize a 776 nm external cavity diode laser. The stability and tunability of this transfer cavity locked laser is established by observation of the hyperfine components of the Rb875P3/2−5D5/2 transition in a vapor cell.
We present the design, implementation, and characterization of a high-stability, fast-tunable fiber Fabry-Pérot microcavity system optimized for coupling with Ba + ions to form quantum network nodes.The microcavity system integrates multiwavelength single-mode transmission, rapid and broad-band tunability, high finesse, and exceptional passive mechanical stability.By incorporating a unique vibration isolation structure, the system enables the fiber-optic microcavity (with a finesse of 8000) to remain resonant with the laser for several minutes even without active feedback.Furthermore, we demonstrate active cavity length stabilization using the Pound-Drever-Hall method, which significantly suppresses low-frequency vibrations and enables the cavity length to remain stable for several days.Experimental results show that this fiber microcavity system offers outstanding stability and flexibility for practical quantum network applications, providing reliable technical support for the construction of large-scale quantum networks based on trapped ions.
Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall (PDH) method. A two channel feedback circuit allows for laser frequency stabilization with a bandwidth of 2 MHz. This laser system has been used to drive the 6S1/2 to 5D3/2 transition in 138Ba+, where a 2 ms laser-ion coherence times has been observed, demonstrating a linewidth of less than 500 Hz. The intensity noise of this system is analyzed and found to be acceptable for several proposed experiments on a single trapped barium ion.