Summary form only given. Controlling and characterizing entanglement in large quantum systems is an exciting challenge of modern physics, and a necessary milestone to fulfill the promises of the second quantum revolution. Along this line, we have built a platform where ultracold rubidium atoms are strongly coupled to a fiber-based Fabry-Perot cavity under a quantum gas microscope. Here, the cavity is used to create collective interactions between the atoms, while the microscope is meant to allow for single-qubit manipulation and readout. To maximize the overlap between the atomic distribution and the 780nm cavity mode to which they are coupled, we use an intracavity far off-resonance lattice trap at 1560nm in a configuration where the antinodes of the 1560nm standing wave coincide with antinodes of the 780nm standing wave, which is possible because the two wavelength are commensurate. With this device, we have observed vacuum Rabi frequencies on the order of 60MHz, corresponding to a single-atom cooperativity of about 40, deep into the strong coupling regime. In the short term, we aim at obtaining a 1D chain of single atoms strongly and homogeneously coupled to the cavity, with single atom addressing and detection capabilities. We will discuss at the conference future prospects that we plan to address with this platform, such as using cavity-assisted Raman transitions to implement, within a fully controlled experimental system, spin models with photon-mediated interactions [4], or the Dicke Hamiltonian [5] where many-body entanglement is known to occur in the vicinity of the associated quantum phase transition.
Summary form only given. Controlling and characterizing entanglement in large quantum systems is an exciting challenge of modern physics, and a necessary milestone to fulfill the promises of the second quantum revolution. Along this line, we have built a platform where ultracold rubidium atoms are strongly coupled to a fiber-based Fabry-Perot cavity under a quantum gas microscope. Here, the cavity is used to create collective interactions between the atoms, while the microscope is meant to allow for single-qubit manipulation and readout. To maximize the overlap between the atomic distribution and the 780nm cavity mode to which they are coupled, we use an intracavity far off-resonance lattice trap at 1560nm in a configuration where the antinodes of the 1560nm standing wave coincide with antinodes of the 780nm standing wave, which is possible because the two wavelength are commensurate. With this device, we have observed vacuum Rabi frequencies on the order of 60MHz, corresponding to a single-atom cooperativity of about 40, deep into the strong coupling regime. In the short term, we aim at obtaining a 1D chain of single atoms strongly and homogeneously coupled to the cavity, with single atom addressing and detection capabilities. We will discuss at the conference future prospects that we plan to address with this platform, such as using cavity-assisted Raman transitions to implement, within a fully controlled experimental system, spin models with photon-mediated interactions [4], or the Dicke Hamiltonian [5] where many-body entanglement is known to occur in the vicinity of the associated quantum phase transition.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.
Strong atom-photon interactions in optical cavities are a key resource for quantum information processing, quantum networking, and the exploration of quantum optical effects. Optical tweezer arrays offer scalable, site-resolved control of neutral atoms, but their integration with high-cooperativity cavity QED systems remains challenging. Here we combine a twelve-site 87Rb optical tweezer array with a high-cooperativity fiber Fabry-Pérot microcavity. The array is positioned within the cavity mode and individual sites are controlled with subwavelength precision, enabling continuous tuning of the single-atom coupling strength via deterministic displacement through the standing-wave field. For up to five atoms coupled to the cavity, we measure collectively enhanced vacuum Rabi splitting and implement cavity-based non-destructive readout of the number of coupled atoms. These results establish a scalable architecture for cavity-mediated entanglement generation and many-body cavity QED with single-atom control, and they lay the foundation for fiber-integrated quantum network nodes.
Neutral-atom array and cavity quantum electrodynamics offer complementary strengths for quantum science: scalable, reconfigurable qubit architectures and strong coherent light-matter coupling. Combining them in a single platform requires an optical cavity with simultaneously high cooperativity, sufficient mode volume to accommodate atom array, and ample side optical access for atom trapping, imaging, cooling, and rearrangement, a combination that is challenging to achieve. Here we realize an atomic array integrated with a millimeter-scale Fabry--Pérot cavity whose optically-characterized single-atom cooperativity reaches ηcav=125±13. Atom-cavity transmission spectra of trapped atoms yield an effective spectroscopic cooperativity ηspec=106±3, providing an in-situ verification of strong coupling in the integrated platform. In this integrated system, we achieve a state-measurement fidelity of 99.925−18+15% for a single atom with a 4-μs readout time. We also demonstrate simultaneous coupling of up to 21 individually trapped atoms to the antinode of the cavity mode. The key technical advance is a two-step mirror-fabrication method combining precision mechanical shaping and carbon-dioxide laser polishing, which produces concave fused-silica mirrors with sub-millimeter radii of curvature and residual roughness below 2A˚. Our results establish a regime of cavity-integrated atomic array that simultaneously provides high cooperativity, large mode volume, and flexible manipulation of individual atoms, opening opportunities for cavity-assisted quantum state readout and long-range entanglement-engineering in atom-array platforms.
Cavity quantum electrodynamics offers the possibility of observing and controlling the motion of a few or individual atoms, enabling the realization of various quantum technological tasks such as quantum enhanced metrology or quantum simulation of strongly correlated matter. A core limitation of these experiments lies in the mode structure of the cavity field, which is hard coded in the shape and geometry of the mirrors. As a result, most applications of cavity QED trade spatial resolution for enhanced sensitivity. Here, we propose and demonstrate a cavity-microscope device capable of controlling in space and time the coupling between atoms and light in a single-mode high-finesse cavity, reaching a spatial resolution an order of magnitude lower than the cavity-mode waist. This is achieved through local Floquet engineering of the atomic level structure, imprinting a corresponding atom-field coupling. We illustrate this capability by engineering micrometer-scale coupling, using cavity-assisted atomic measurements and optimization. Our system forms an optical device with a single optical axis, has the same footprint and complexity as a standard Fabry-Perot cavity or confocal lens pair, and can be used for any atomic species. This technique opens a wide range of perspectives, from ultrafast cavity-enhanced midcircuit readout to the quantum simulation of fully connected models of quantum matter such as the Sachdev-Ye-Kitaev model. Published by the American Physical Society 2024
We have used a fiber Fabry-Perot cavity on an atom chip to obtain strong, extremely stable atom-cavity coupling for single atoms and Bose-Einstein condensates trapped inside the cavity. The coherent atom-cavity coupling parameter, g0/2pi ~ 209 MHz, is larger than both cavity decay, kappa/2pi ~ 53 MHz and spontaneous emission gamma/2pi ~ 3 MHz. Due to the small mode volume, these values, well inside the strong coupling regime of cavity QED, are realized with a cavity finesse F ~ 36000, which is a moderate value compared to usual strong-coupling cavity QED experiments. The cavity also achieves a very high cooperativity parameter, C=g02/2kappagamma ~ 130.The use of trapped Bose-Einstein condensates (BECs) is a fundamentally new situation for cavity QED, which should enable a new class of experiments, where atoms that share a well-defined internal and external quantum state collectively interact with a quantized mode of the cavity. Besides, as the spatial extension of the BEC assumes the fundamental limit that can be attained for an atom cloud - much smaller than an optical wavelength in our case - an extremely strong, stable and uniform coupling to the cavity mode is achieved. This makes the system interesting for applications such as quantum memories. For single atoms, our combination of high resonator cooperativity with extreme positioning precision enables qubit detection with near-unit efficiency. This realizes a long-awaited milestone for quantum information processing on atom chips.
The cavity quantum electrodynamics (QED) system is a promising platform for quantum optics and quantum information experiments.Its core is the strong coupling between atoms and optical cavity, which causes difficulty in the overlap between the atoms and the antinode of optical cavity mode.Here, we use a programmable movable optical dipole trap to load a cold atomic ensemble into an optical fiber microcavity and realize the strong coupling between the atoms and the optical cavity in which the coupling strength can be improved by polarization gradient cooling and adiabatic loading.By the measurement of vacuum Rabi splitting, the coupling strength can be as high as g N = 2π × 400 MHz, which means the effective atom number is N eff = 16 and the collective cooperativity is C N = 1466.These results show that this experimental system can be used for cold atomic ensemble and cold molecule based cavity QED research.