One of the main challenges in designing large scale quantum processors is connecting separated qubits. In this thesis, we explore new opportunities that mesoscopic many-body systems provide for creating quantum correlation between isolated quantum systems. In particular, we study entangling two non-interacting qubits through an intermediate mesoscopic system consisting of identical two-level systems. Two uncoupled qubits can be entangled either by projectively measuring a joint property of them or by creating an indirect interaction between them. The focus of this thesis is on procedures that are based on joint measurement on the qubits. \nWe propose a new method for entangling two non-interacting qubits by measuring their parity indirectly through an intermediate mesoscopic system. Indirect joint measurement scheme benefits from coherent magnification of the target qubits’ state in the collective state of the mesoscopic system; such that a low-resolution measurement on the mesoscopic system suffices to prepare post-selected entanglement on the target qubits. The protocol is designed to require only global control and course-grained collective measurement of the mesoscopic system along with local interactions between the target qubits and mesoscopic system. A generalization of the method measures the hamming weight of the qubits’ state and probabilistically produces an entangled state by post-selecting on hamming weight one. Our technique provides a new design element that can be integrated into quantum processor architectures and quantum measurement devices. \nWe quantify the resources required for implementing the indirect joint measurement technique when the intermediate mesoscopic system consists of spin-1/2 particles with internal dipolar coupling. A mesoscopic spin system consisting of two non-interacting halves, each coupled to one of the target qubits is proved to provide a helpful geometry that allows implementing the coherent magnification process with experimentally available control tools. We show that the requirements on the amplified state of the target qubits and the mesoscopic spin system perfectly maps to the specifications of micro-macro entanglement between each target qubit and its nearby half of the mesoscopic spin system. In the light of this equivalence, the effects of experimental imperfections are explored; in particular, bipartite entanglement between the target qubits is shown to be robust to imperfect preparation of the mesoscopic spin system. Our analysis provides a new approach for using an intermediate spin system for connecting separated qubits. It also opens a new path in exploring entanglement between microscopic and mesoscopic spin systems.
One of the main challenges in designing large scale quantum processors is connecting separated qubits. In this thesis, we explore new opportunities that mesoscopic many-body systems provide for creating quantum correlation between isolated quantum systems. In particular, we study entangling two non-interacting qubits through an intermediate mesoscopic system consisting of identical two-level systems. Two uncoupled qubits can be entangled either by projectively measuring a joint property of them or by creating an indirect interaction between them. The focus of this thesis is on procedures that are based on joint measurement on the qubits. \nWe propose a new method for entangling two non-interacting qubits by measuring their parity indirectly through an intermediate mesoscopic system. Indirect joint measurement scheme benefits from coherent magnification of the target qubits’ state in the collective state of the mesoscopic system; such that a low-resolution measurement on the mesoscopic system suffices to prepare post-selected entanglement on the target qubits. The protocol is designed to require only global control and course-grained collective measurement of the mesoscopic system along with local interactions between the target qubits and mesoscopic system. A generalization of the method measures the hamming weight of the qubits’ state and probabilistically produces an entangled state by post-selecting on hamming weight one. Our technique provides a new design element that can be integrated into quantum processor architectures and quantum measurement devices. \nWe quantify the resources required for implementing the indirect joint measurement technique when the intermediate mesoscopic system consists of spin-1/2 particles with internal dipolar coupling. A mesoscopic spin system consisting of two non-interacting halves, each coupled to one of the target qubits is proved to provide a helpful geometry that allows implementing the coherent magnification process with experimentally available control tools. We show that the requirements on the amplified state of the target qubits and the mesoscopic spin system perfectly maps to the specifications of micro-macro entanglement between each target qubit and its nearby half of the mesoscopic spin system. In the light of this equivalence, the effects of experimental imperfections are explored; in particular, bipartite entanglement between the target qubits is shown to be robust to imperfect preparation of the mesoscopic spin system. Our analysis provides a new approach for using an intermediate spin system for connecting separated qubits. It also opens a new path in exploring entanglement between microscopic and mesoscopic spin systems.
We quantify the resources required for entangling two uncoupled spin qubits through an intermediate mesoscopic spin system (MSS) by indirect joint measurement. Indirect joint measurement benefits from coherent magnification of the target qubits' state in the collective magnetization of the MSS, such that a low-resolution collective measurement on the MSS suffices to prepare postselected entanglement on the target qubits. A MSS consisting of two noninteracting halves, each coupled to one of the target qubits, is identified as a geometry that allows implementing the magnification process with experimentally available control tools. It is proved that the requirements on the amplified state of the target qubits and the MSS perfectly map to the specifications of micro-macro entanglement between each target qubit and its nearby half of the MSS. In the light of this equivalence, the effects of experimental imperfections are explored; in particular, bipartite entanglement between the target qubits is shown to be robust to imperfect preparation of the MSS. Our study provides an approach for using an intermediate spin system for connecting separated qubits. It also opens another path in exploring entanglement between microscopic and mesoscopic spin systems.
We propose a method for entangling two noninteracting qubits by measuring their parity indirectly through an intermediate mesoscopic system. The protocol is designed to require only global control and course-grained collective measurement of the mesoscopic system along with local interactions between the target qubits and mesoscopic system. A generalization of the method measures the hamming weight of the qubits' state and probabilistically produces an entangled state by post-selecting on hamming weight one. Our technique provides a design element that can be integrated into quantum processor architectures and quantum measurement devices.
The generation of entanglement in atomic systems plays a central topic in the fields of quantum information storage and processing. Moreover, a special category of entangled states of multi-atom ensembles, spin squeezed states, have been proven to lead to considerable improvement in the sensitivity of precision measurements compared to systems involving uncorrelated atoms. A treatment of entanglement in open systems is, however, incomplete without a precise description of the process of decoherence which necessarily accompanies it. The theory of entanglement and decoherence are the two main topics of this thesis. Methods are described for the generation of strong correlations in large atomic ensembles using either cavity quantum electrodynamics or measurement outcome conditioned quantum dynamics. Moreover, the description of loss of entanglement resulting from the coupling to a noise reservoir (electromagnetic vacuum) is explored. A spin squeezing parameter is used throughout this thesis as both a measure of entanglement strength and as an indication of the sensitivity improvement above the so-called standard quantum limit (sensitivity obtained with uncorrelated particles) in metrology. The first scheme considered consists of a single mode cavity field interacting with a collection of atoms for which spin squeezing is produced in both resonant and off-resonant regimes. In the resonant case, transfer of squeezing from a field state to the atoms is analyzed, while in the off-resonant regime squeezing is produced via an effective nonlinear interaction (one-axis twisting Hamiltonian). A second, more experimentally realistic case, is one involving the interaction of free space atoms with laser pulses; a projective measurement of a source field originating from atomic fluctuations provides a means of preparing atomic collective states such as spin squeezed and Schrodinger cat states. A new unravelling is proposed, that employs the detection of photon number in a single output channel and is capable of producing mesoscopic Schrodinger cat states in a single step. As a first step to understanding the role of cooperative decoherence, of importance in the case of dense pencil-shaped atomic ensembles, the collective spin decoherence of a two multilevel atom system is derived. This calculation is also relevant to entanglement loss for two qubits manipulated using with reading/writing pulses. Finally, a scheme is proposed in which arbitrarily strong entanglement can be produced in a four-wave mixing setup, where the preparation of the atoms in a dark state limits the decoherence to negligible values.
Bipartite entangled states between a qubit and macroscopically distinct states of a mesoscopic system, known as micro-macro entangled states, are emerging resources for quantum information processing. One main challenge in generating such states in the laboratory is their fragility to environmental noise. We analyze this fragility in detail for single-particle noise by identifying what factors play a role in the robustness and quantifying their effect. There is a trade-off between the macroscopicity of a micro-macro entangled state and the robustness of its bipartite entanglement to environmental noise. We identify symmetric micro-macro entangled states as the most robust states to single-particle noise. We show that the robustness of bipartite entanglement of such states to single-particle noise decreases as the second order of macroscopicity, which identifies a regime where the bipartite entangled state is both robust and macroscopic. Our result is a step towards retaining quantum characteristics on large scales and experimental realization of micro-macro entangled spin states and their use for connecting separated qubits. Moreover, it advances our understanding of quantum to classical transition.
This thesis focuses on the experimental creation and detection of a variety of quantum correlations using nuclear magnetic resonance hardware. Quantum entanglement, being most common and counter-intuitive, is one of the main type considered in this thesis. Quantum correlations play a major role in achieving, the much talked, computational speedup. Creation and detection of such correlations experimentally is a major thrust area in experimental quantum information processing field. Main goals of the studies undertaken in this thesis were to come up with strategies to detect the entanglement in a 'state-independent' way and with low experimental resources. The core of all the detection protocols is based on our own developed method which enables us to measure any observable with high accuracy. The experimental protocol has been successfully implemented to detect the entanglement of random two-qubit pure states. Further, the schemes for the experimental detection as well as classification of generic and general three-qubit pure states have also been devised and implemented successfully. Quantum correlation possessed by mixed and/or separable states e.g. non-classical, bound-entanglement and of non-local nature were also investigated. In all the investigations, the results were verified by one or more alternative ways e.g. full quantum state tomography.
The generation and exploitation of entangled states has become one of the most important technological challenges of the twenty-first century. In order to reliably generate multi-particle entangled states, one needs controllable two (or more) qubit interactions, and there have been many proposals for suitable systems. We have recently begun investigating adiabatic transfer protocols (Greentree et al. 2004), which are distinguished from conventional, nonadiabatic approaches by their robustness and relative insensitivity to noise. Focussing on the phosphorus in silicon paradigm we have shown how such transport leads to new quasi-2D architectures (Hollenberg et al. 2006), and surprising particle coupling schemes based on operator measurements (Devitt et al. 2005; Greentree et al. 2006), which in turn may lead to efficient mechanisms for syndrome identification in quantum error correction. Here we describe the realisation of these operator measurements more fully based on adiabatic passage of a control particle, highlighting the applicability of our protocols by showing how they can improve the scalability of other implementations. Introduction The pursuit of devices which can exploit quantum coherence is widely seen as one of the most important and challenging tasks facing twenty-first Century Technology. Defined by the use of coherent quantum systems (at their simplest: qubits, two-state systems) such devices enable a range of tasks, from quantum key distribution via single qubits (Bennett and Brassard 1984) or entangled states (Ekert 1991), to protocols for quantum teleportation (Bennett et al. 1993), efficient quantum simulation (Feynmann 1982; Abrams and Lloyd 1997) and factorisation (Shor 1994). At the heart of most such protocols is the exploitation of entanglement, where qubits that have been entangled, in some sense feel an interaction even if space-like separated. In fact, entanglement is a ubiquitous feature of quantum systems: the task for quantum information devices is to generate controlled and isolated entanglement, so that only the desired qubits are entangled with each other, and deleterious entanglement to the environment avoided. Broadly speaking, entanglement can be generated in one of two ways, either by direct interactions between qubits, or by collective measurement of two (or more) particles in particular bases that are, by their very nature, entangled. Such projective measurements are called operator measurements, and a flexible mechanism to realise them forms the basis of this paper. Operator measurements are intimately linked to the concept of quantum error correction (QEC) (Nielsen and Chuang 2000), and as QEC is an extremely important task for quantum computing, it is possible that our schemes may prove extremely useful in future quantum computers (QC). Operator measurements are also compatible with the concept of ‘repeat-until-success’ quantum computing (Lim et al. 2005; Barrett and Kok 2005; Lim et al. 2006) which has potential advantages for QC in realistic settings. Our method for generating operator measurements is based on protocols to transfer particles adiabatically around a quantum network. There are now several different protocols for such spatial adiabatic passage, which are all extensions of the original STIRAP (STImulated Raman Adiabatic Passage) (Vitanov et al. 2001) protocol. Spatial adiabatic passage protocols can be mediated via electromagnetic pulses (Brandes et al. 2001; Siewert et al. 2006), or direct control of wavefunction overlap (Greentree et al. 2004; Eckert et al. 2004; Petrosyan 2006). All such schemes share a common theme, namely that a particular eigenstate, which is in the null space of the Hamiltonian, can be smoothly evolved as a function of time. Such protocols are therefore extremely robust, requiring little regard for timing provided that the adiabaticity criterion (Vitanov et al. 2001) is respected. For concreteness, we will review the MRAP protocol (Multiple Recipient Adiabatic Passage) introduced by us earlier (Devitt et al. 2005; Greentree et al. 2006), and show explicitly how it can be used to mediate operator measurements. We will then comment on some of the implications of this protocol for QC designs, especially when concepts such as defect-tolerance are introduced. Multiple-Recipient Adiabatic Passage Consider a network, defined by four quantum dots that share a single electron, and two attached qubits, as depicted in Fig. 1(a). Employing quantum communication terminology, we suppose that Alice wishes to send a particle (with information encoded in the electronic spin states) to either Bob 1 or Bob 2, or to some arbitrary superposition of the Bobs, Australian Institute of Physics 17th National Congress 2006 – Brisbane, 3-8 December 2006 RiverPhys Paper No. 474 using the network. For clarity we refer to the particle transferred through the network as the bus particle. We label the quantum dots, A (Alice), 1 B (Bob 1), 2 B (Bob 2), C (Central). Also, the Bobs have qubits 1 Q and 2 Q which will be used later. We further assume that each participant has control of the coupling of their quantum dot to the central dot, and we label this coupling Ωα for α = A, B1, B2. With all dots maintained at constant energy, the Hamiltonian for this four dot system (ignoring the spin degree of freedom) is ( ) ( ) ( ) . . 2 2 1 1 c h C B t C B t A C t H B B A + Ω + Ω + Ω = where the couplings are allowed to vary as a function of time (for example by local control of surface gates to modify the barrier potential). The null space of the Hamiltonian above is a two-dimensional space, spanned by the vectors