Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Creating Quantum Topological Materials with 3D Microwave Photons

Clai Owens

Published Oct 1, 2019• 1 citation
Publisher

Abstract

The recent rapid advancement in the ability to create and manipulate superconducting qubit systems has created an exciting opportunity to construct quantum materials from the ground up, artificial atom by atom. This thesis will explore the creation of a new architecture of quantum simulation in which we use the circuit quantum electrodynamics toolbox to build quantum topological materials that so far have proven difficult to understand with theory, simulate with computational methods, and realize/measure with other quantum systems. Specifically we design a two-dimensional material in which microwave photons living in a superconducting 3D microwave cavity lattice interact strongly with a time-reversal symmetry breaking magnetic field and with each other. This is the first photonic topological lattice platform compatible with strong interactions. The combination of these interactions will enable the study of fractional quantum Hall systems, where fractionally charged particles called anyons are theorized to exist. This thesis describes how to engineer a tunable, low loss microwave lattice, create a magnetic field for chargeless photons using ferrite crystals, and generate inter-particle interactions using Josephson junction transmon qubits.

DOI
10.6082/2ysf3-ah580

Related papers

Quantum Many-Body Physics with Photons

Ningyuan Jia

Understanding and manipulating quantum materials is a long-sought goal in both the condensed matter and cold atom communities. Photons have recently emerged as a good candidate for studying quantum many-body states due to their fast dynamics and convenient manipulation. Tremendous efforts have been made to engineer single particle Hamiltonian with non-trivial topology. Having individual photons to strongly collide with each other and form an entangled many-body state remained as a challenge in optical domain. ,In this thesis, I will first demonstrate how to engineer artificial magnetic field and non-trivial topology for microwave photons. In a classical lumped element circuit, we demonstrate the edge modes for microwave photons within the bulk band, and also show that these modes propagates with topological protection against the local lattice disorder. This work paves the way to synthesize correlated quantum materials in a lattice using microwave photons, combined with circuit QED technique. ,Recently, Rydberg-Rydberg interaction has been broadly used in cold atom experiment to generate long-range inter-particle coupling for quantum information processing and quantum material simulation. We combine this technique with cavity electromagnetically induced transparency and create a robust quasi-particle, cavity Rydberg polaritons, which harness the power from both cavity photons with exotic topology and Rydberg atoms with strong interactions. We first demonstrate the interaction in the single quanta level in a quantum dot with single cavity mode and further expand it into multi-mode regime with modulated atomic states.

Bulletin of the American Physical Society•Jan 1, 2018•0 citations

Waveguide quantum electrodynamics with superconducting qubits

Bharath Kannan

Experiments utilizing quantum optics have progressed rapidly in last few decades, particularly in the context of quantum computation, simulation, and communication. Early work in this field focused on implementations of cavity quantum electrodynamics (QED), where atoms, either natural or artificial, are strongly coupled to the confined photonic modes of cavities. However, in recent years, achieving strong coupling between atoms and itinerant photons has also gained significant interest for its applications in quantum networking. To this end, many atomic platforms are attempting to realize the waveguide QED architecture: atoms that interact with the continua of propagating photonic modes within a waveguide. In this thesis, we realize the strong-coupling regime of a waveguide QED architecture by coupling superconducting artificial atoms, typically operated as qubits, to one-dimensional transmission lines. We first demonstrate that superconducting qubits in a waveguide QED system can be used as high-quality quantum emitters. We then leverage the quantum interference between the simultaneous emission from multiple qubits in order to generate non-classical, spatially entangled, and directional itinerant microwave photons. These types of photons are particularly useful for remote entanglement and quantum communication protocols. Finally, we demonstrate that superconducting qubits can be engineered to enter novel regimes of light-matter interactions that are difficult, or even impossible, to achieve in other atomic platforms. In particular, we realize the giant-atom regime of waveguide QED, where the atom can no longer be treated as a point-like object. We use our giant atoms to implement tunable atom-waveguide couplings, as well as decoherence-free waveguide-mediated interactions between multiple atoms.

•Jan 1, 2018•0 citations

Circuit quantum electrodynamics simulator of flat band physics in a Lieb lattice

Zi-He Yang, Yan-Pu Wang, Zheng‐Yuan Xue +4 more

The concept of flat band plays an important role in strongly correlated many-body physics. However, the demonstration of the flat band physics is highly nontrivial due to intrinsic limitations in conventional condensed-matter materials. Here we propose a circuit quantum electrodynamics simulator of the two-dimensional (2D) Lieb lattice exhibiting a flat middle band. By exploiting the parametric conversion method, we design a photonic Lieb lattice with in situ tunable hopping strengths in a 2D array of coupled superconducting transmissionline resonators. Moreover, the flexibility of our proposal enables the incorporation of both the artificial gauge field and the strong photon-photon interaction in a time- and site-resolved manner. To unambiguously demonstrate the synthesized flat band, we further investigate the observation of the flat band localization of microwave photons through the pumping and the steady-state measurements of only a few sites on the lattice. Requiring only current level of technique and being robust against imperfections in realistic circuits, our scheme can be readily tested in experiment and may pave a new way towards the realization of exotic photonic quantum Hall fluids including anomalous quantum Hall effect and bosonic fractional quantum Hall effect without magnetic field.

arXiv:1603.04686•Physical Review A•Jun 17, 2016•41 citations

Integration of Topological Insulator Josephson Junctions in Superconducting Qubit Circuits

Tobias Schmitt, M. R. Connolly, Michael Schleenvoigt +16 more

The integration of semiconductor Josephson junctions (JJs) in superconducting quantum circuits provides a versatile platform for hybrid qubits and offers a powerful way to probe exotic quasiparticle excitations. Recent proposals for using circuit quantum electrodynamics (cQED) to detect topological superconductivity motivate the integration of novel topological materials in such circuits. Here, we report on the realization of superconducting transmon qubits implemented with (Bi 0.06 Sb 0.94 ) 2 Te 3 topological insulator (TI) JJs using ultrahigh vacuum fabrication techniques. Microwave losses on our substrates, which host monolithically integrated hardmasks used for the selective area growth of TI nanostructures, imply microsecond limits to relaxation times and, thus, their compatibility with strong-coupling cQED. We use the cavity–qubit interaction to show that the Josephson energy of TI-based transmons scales with their JJ dimensions and demonstrate qubit control as well as temporal quantum coherence. Our results pave the way for advanced investigations of topological materials in both novel Josephson and topological qubits.

arXiv:2007.04224•Nano Letters•Mar 2, 2022•48 citations

Propagating microwave photons in superconducting circuits

Juan José García‐Ripoll, J. J. Mazo, E. Solano +1 more

In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.

•Sep 9, 2012•0 citations

Microwave cavity lattices for quantum simulation with photons

Devin Underwood

Historically our understanding of the microscopic world has been impeded by limitations in systems that behave classically. Even today, understanding simple problems in quantum mechanics remains a difficult task both computationally and experimentally. As a means of overcoming these classical limitations, the idea of using a controllable quantum system to simulate a less controllable quantum system has been proposed. This concept is known as quantum simulation and is the origin of the ideas behind quantum computing. In this thesis, experiments have been conducted that address the feasibility of using devices with a circuit quantum electrodynamics (cQED) architecture as a quantum simulator. In a cQED device, a superconducting qubit is capacitively coupled to a superconducting resonator resulting in coherent quantum behavior of the qubit when it interacts with photons inside the resonator. It has been shown theoretically that by forming a lattice of cQED elements, different quantum phases of photons will exist for dierent system parameters. In order to realize such a quantum simulator, the necessary experimental foundation must rst be developed. Here experimental eorts were focused on addressing two primary issues: 1) designing and fabricating low disorder lattices that are readily available to incorporate superconducting qubits, and 2) developing new measurement tools and techniques that can be used to characterize large lattices, and probe the predicted quantum phases within the lattice. Three experiments addressing these issues were performed. In the rst experiment a Kagome lattice of transmission line resonators was designed and fabricated, and a comprehensive study on the effects of random disorder in the lattice demonstrated that disorder was dependent on the resonator geometry. Subsequently a cryogenic 3-axis scanning stage was developed and the operation of the scanning stage was demonstrated in the final two experiments. The rst scanning experiment was conducted on a 49 site Kagome lattice, where a sapphire defect was used to locally perturb each lattice site. This perturbative scanning probe microscopy provided a means to measure the distribution of photon modes throughout the entire lattice. The second scanning experiment was performed on a single transmission line resonator where a transmon qubit was fabricated on a separate substrate, mounted to the tip of the scanning stage and coupled to the resonator. Here the coupling strength of the qubit to the resonator was mapped out demonstrating strong coupling over a wide scanning range, thus indicating the potential for a scanning qubit to be used as a local quantum probe.

•Jan 1, 2015•0 citations
The recent rapid advancement in the ability to create and manipulate superconducting qubit systems has created an exciting opportunity to construct quantum materials from the ground up, artificial atom by atom. This thesis will explore the creation of a new architecture of quantum simulation in which we use the circuit quantum electrodynamics toolbox to build quantum topological materials that so far have proven difficult to understand with theory, simulate with computational methods, and realize/measure with other quantum systems. Specifically we design a two-dimensional material in which microwave photons living in a superconducting 3D microwave cavity lattice interact strongly with a time-reversal symmetry breaking magnetic field and with each other. This is the first photonic topological lattice platform compatible with strong interactions. The combination of these interactions will enable the study of fractional quantum Hall systems, where fractionally charged particles called anyons are theorized to exist. This thesis describes how to engineer a tunable, low loss microwave lattice, create a magnetic field for chargeless photons using ferrite crystals, and generate inter-particle interactions using Josephson junction transmon qubits.
Understanding and manipulating quantum materials is a long-sought goal in both the condensed matter and cold atom communities. Photons have recently emerged as a good candidate for studying quantum many-body states due to their fast dynamics and convenient manipulation. Tremendous efforts have been made to engineer single particle Hamiltonian with non-trivial topology. Having individual photons to strongly collide with each other and form an entangled many-body state remained as a challenge in optical domain. ,In this thesis, I will first demonstrate how to engineer artificial magnetic field and non-trivial topology for microwave photons. In a classical lumped element circuit, we demonstrate the edge modes for microwave photons within the bulk band, and also show that these modes propagates with topological protection against the local lattice disorder. This work paves the way to synthesize correlated quantum materials in a lattice using microwave photons, combined with circuit QED technique. ,Recently, Rydberg-Rydberg interaction has been broadly used in cold atom experiment to generate long-range inter-particle coupling for quantum information processing and quantum material simulation. We combine this technique with cavity electromagnetically induced transparency and create a robust quasi-particle, cavity Rydberg polaritons, which harness the power from both cavity photons with exotic topology and Rydberg atoms with strong interactions. We first demonstrate the interaction in the single quanta level in a quantum dot with single cavity mode and further expand it into multi-mode regime with modulated atomic states.
Experiments utilizing quantum optics have progressed rapidly in last few decades, particularly in the context of quantum computation, simulation, and communication. Early work in this field focused on implementations of cavity quantum electrodynamics (QED), where atoms, either natural or artificial, are strongly coupled to the confined photonic modes of cavities. However, in recent years, achieving strong coupling between atoms and itinerant photons has also gained significant interest for its applications in quantum networking. To this end, many atomic platforms are attempting to realize the waveguide QED architecture: atoms that interact with the continua of propagating photonic modes within a waveguide. In this thesis, we realize the strong-coupling regime of a waveguide QED architecture by coupling superconducting artificial atoms, typically operated as qubits, to one-dimensional transmission lines. We first demonstrate that superconducting qubits in a waveguide QED system can be used as high-quality quantum emitters. We then leverage the quantum interference between the simultaneous emission from multiple qubits in order to generate non-classical, spatially entangled, and directional itinerant microwave photons. These types of photons are particularly useful for remote entanglement and quantum communication protocols. Finally, we demonstrate that superconducting qubits can be engineered to enter novel regimes of light-matter interactions that are difficult, or even impossible, to achieve in other atomic platforms. In particular, we realize the giant-atom regime of waveguide QED, where the atom can no longer be treated as a point-like object. We use our giant atoms to implement tunable atom-waveguide couplings, as well as decoherence-free waveguide-mediated interactions between multiple atoms.
The concept of flat band plays an important role in strongly correlated many-body physics. However, the demonstration of the flat band physics is highly nontrivial due to intrinsic limitations in conventional condensed-matter materials. Here we propose a circuit quantum electrodynamics simulator of the two-dimensional (2D) Lieb lattice exhibiting a flat middle band. By exploiting the parametric conversion method, we design a photonic Lieb lattice with in situ tunable hopping strengths in a 2D array of coupled superconducting transmissionline resonators. Moreover, the flexibility of our proposal enables the incorporation of both the artificial gauge field and the strong photon-photon interaction in a time- and site-resolved manner. To unambiguously demonstrate the synthesized flat band, we further investigate the observation of the flat band localization of microwave photons through the pumping and the steady-state measurements of only a few sites on the lattice. Requiring only current level of technique and being robust against imperfections in realistic circuits, our scheme can be readily tested in experiment and may pave a new way towards the realization of exotic photonic quantum Hall fluids including anomalous quantum Hall effect and bosonic fractional quantum Hall effect without magnetic field.
The integration of semiconductor Josephson junctions (JJs) in superconducting quantum circuits provides a versatile platform for hybrid qubits and offers a powerful way to probe exotic quasiparticle excitations. Recent proposals for using circuit quantum electrodynamics (cQED) to detect topological superconductivity motivate the integration of novel topological materials in such circuits. Here, we report on the realization of superconducting transmon qubits implemented with (Bi 0.06 Sb 0.94 ) 2 Te 3 topological insulator (TI) JJs using ultrahigh vacuum fabrication techniques. Microwave losses on our substrates, which host monolithically integrated hardmasks used for the selective area growth of TI nanostructures, imply microsecond limits to relaxation times and, thus, their compatibility with strong-coupling cQED. We use the cavity–qubit interaction to show that the Josephson energy of TI-based transmons scales with their JJ dimensions and demonstrate qubit control as well as temporal quantum coherence. Our results pave the way for advanced investigations of topological materials in both novel Josephson and topological qubits.
In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.
Historically our understanding of the microscopic world has been impeded by limitations in systems that behave classically. Even today, understanding simple problems in quantum mechanics remains a difficult task both computationally and experimentally. As a means of overcoming these classical limitations, the idea of using a controllable quantum system to simulate a less controllable quantum system has been proposed. This concept is known as quantum simulation and is the origin of the ideas behind quantum computing. In this thesis, experiments have been conducted that address the feasibility of using devices with a circuit quantum electrodynamics (cQED) architecture as a quantum simulator. In a cQED device, a superconducting qubit is capacitively coupled to a superconducting resonator resulting in coherent quantum behavior of the qubit when it interacts with photons inside the resonator. It has been shown theoretically that by forming a lattice of cQED elements, different quantum phases of photons will exist for dierent system parameters. In order to realize such a quantum simulator, the necessary experimental foundation must rst be developed. Here experimental eorts were focused on addressing two primary issues: 1) designing and fabricating low disorder lattices that are readily available to incorporate superconducting qubits, and 2) developing new measurement tools and techniques that can be used to characterize large lattices, and probe the predicted quantum phases within the lattice. Three experiments addressing these issues were performed. In the rst experiment a Kagome lattice of transmission line resonators was designed and fabricated, and a comprehensive study on the effects of random disorder in the lattice demonstrated that disorder was dependent on the resonator geometry. Subsequently a cryogenic 3-axis scanning stage was developed and the operation of the scanning stage was demonstrated in the final two experiments. The rst scanning experiment was conducted on a 49 site Kagome lattice, where a sapphire defect was used to locally perturb each lattice site. This perturbative scanning probe microscopy provided a means to measure the distribution of photon modes throughout the entire lattice. The second scanning experiment was performed on a single transmission line resonator where a transmon qubit was fabricated on a separate substrate, mounted to the tip of the scanning stage and coupled to the resonator. Here the coupling strength of the qubit to the resonator was mapped out demonstrating strong coupling over a wide scanning range, thus indicating the potential for a scanning qubit to be used as a local quantum probe.