Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nonimaging Optics: Efficient Design for Illumination and Concentration

Advances in Raman-based broadband optical refrigeration

Reid Vorbach, Russell Lochrie, Kenneth Sobablo, Mostafa Sadoqi, C.M. Fortmann

Published Sep 9, 2019• 1 citation
Publisher

Abstract

This work reports progress towards demonstrated Raman-based optical refrigeration. Previously [1] we introduced Raman refrigeration and its required photonic structures. Building on the previous, the mechanisms and photonic structures are detailed and simplified proof-of-concept devices described. Three wavelength bands, two illuminated and one dark, are considered. The width of each of these bands is predicated upon the magnitude of the Raman shift of the active layer. Optimally, the first illuminated band is approximately one Raman shift (wavelength) in width. This illuminated band is capped above (at shorter wavelengths) by a dark band. At longer wavelengths a second illuminated band again one Raman shift in width is reflected by photonic structuring that forbids light propagation. The dark bands provide an exhaust through which up energy (anti-Stokes) shifted light can be emitted thereby carrying away heat. The Photonic structure prohibits the propagation of a band of long wavelength light thereby both blocking Stoke’s shifted illuminated band light and reflecting incident light having these wavelengths. The naturally occurring solar spectrum with its light and dark bands caused by atmospheric absorption is a good match to diamond-based Raman refrigeration. Diamond also has extremely low absorption and large Raman cross-section especially in small grain form. Proof-of-concept devices employing simple one-dimensional photonic structures are the focus of present experimental effort. The prospect of broadband refrigeration remains a delicate balance requiring limited absorption and increased Raman cross section through phonon engineering of the Raman active layer.

DOI
10.1117/12.2528818

Related papers

Prospects for broadband spectrum Raman optical refrigeration

Reid Vorbach, C.M. Fortmann, Rachel Tyo +4 more

Described are the prospects for broadband optical refrigeration based on Raman scattering of incoherent light. Laser pumped rare earth fluorescence has been demonstrated and commercial applications are sure to follow. Broadband refrigeration requires strong Raman scattering and large Raman shift. Also required are spectral management and photonic patterning to offset the unfavorable anti-Stoke’s to Stoke’s shift ratio. Materials such as diamond, silicon, and a number of molecular systems are ideal and have low absorption. Optics splits the broadband spectrum into light and dark bands with width corresponding to the Raman shift. Broadband spectrums where photon flux decreases with increasing photon energy are ideal. By tailoring the incoming spectrum, by utilizing extremely transparent strong Raman shift materials and by photonic inhibition of Stoke’s shifted light the prospect become feasible. The Raman optical cross- section increases with decreasing particle size (until the particle become too small to support the Raman-phonons). Where conservation of phonon states in these truncated Brillioun-zone particles requires an increased density (number/cm3) of the allowed-states to compensate for states lost to particle size. Nonetheless, the anti-Stokes to Stokes ratio is approximately one-to-two at laboratory temperature. Thin film deposited diamond is an excellent candidate for refrigeration applications due to its high transparency small grain size and its large Raman magnitude and large shift. Simple one-dimensional photonic structures selectively inhibit the Stoke’s shifted light making refrigeration possible.

Nonimaging Optics: Efficient Design for Illumination and Concentration•Sep 14, 2018•3 citations

Raman cooling of solids through photonic density of states engineering

Yin-Chung Chen, Gaurav Bahl

The laser cooling of vibrational states of solids has been achieved through photoluminescence in rare-earth elements, optical forces in optomechanics, and the Brillouin scattering light-sound interaction. The net cooling of solids through spontaneous Raman scattering, and laser refrigeration of indirect band gap semiconductors, both remain unsolved challenges. Here, we analytically show that photonic density of states (DoS) engineering can address the two fundamental requirements for achieving spontaneous Raman cooling: suppressing the dominance of Stokes (heating) transitions, and the enhancement of anti-Stokes (cooling) efficiency beyond the natural optical absorption of the material. We develop a general model for the DoS modification to spontaneous Raman scattering probabilities, and elucidate the necessary and minimum condition required for achieving net Raman cooling. With a suitably engineered DoS, we establish the enticing possibility of refrigeration of intrinsic silicon by annihilating phonons from all its Raman-active modes simultaneously, through a single telecom wavelength pump. This result points to a highly flexible approach for laser cooling of any transparent semiconductor, including indirect band gap semiconductors, far away from significant optical absorption, band-edge states, excitons, or atomic resonances.

arXiv:1507.08936•Optica•Oct 8, 2015•28 citations

Photoluminescent cooling with incoherent light

Sushrut Ghonge, Masaru K. Kuno, Boldizsár Jankó

Optical refrigeration using anti-Stokes photoluminescence is now well established, especially for rare-earth-doped solids where cooling to cryogenic temperatures has recently been achieved. The cooling efficiency of optical refrigeration is constrained by the requirement that the increase in entropy of the photon field must be greater than the decrease in entropy of the sample. Laser radiation has been used in all demonstrated cases of optical refrigeration with the intention of minimizing the entropy of the absorbed photons. In this presentation, I will show that as long as the incident radiation is unidirectional, the loss of coherence does not significantly affect the cooling efficiency. Using a general formulation of radiation entropy as the von Neumann entropy of the photon field, I will show how the cooling efficiency depends on the properties of the light source such as wavelength, coherence, and directionality. These results suggest that the laws of thermodynamics permit optical cooling of materials with incoherent sources such as light emitting diodes and filtered sunlight almost as efficiently as with lasers.

•Mar 19, 2025•0 citations

Photoluminescent cooling with incoherent light

Sushrut Ghonge, Masaru K. Kuno, Boldizsár Jankó

Optical refrigeration using anti-Stokes photoluminescence is now well established, especially for rare-earth-doped solids where cooling to cryogenic temperatures has recently been achieved. The cooling efficiency of optical refrigeration is constrained by the requirement that the increase in the entropy of the photon field must be greater than the decrease in the entropy of the sample. Laser radiation has been used in all demonstrated cases of optical refrigeration with the intention of minimizing the entropy of the absorbed photons. Here, we show that as long as the incident radiation is unidirectional, the loss of coherence does not significantly affect the cooling efficiency. Using a general formulation of radiation entropy as the von Neumann entropy of the photon field, we show how the cooling efficiency depends on the properties of the light source, such as wavelength, coherence, and directionality. Our results suggest that the laws of thermodynamics permit optical cooling of materials with incoherent sources, such as light emitting diodes and filtered sunlight, almost as efficiently as with lasers. Our findings have significant and immediate implications for design of compact all-solid-state devices cooled via optical refrigeration.

arXiv:2306.17327•APL Photonics•Aug 1, 2024•2 citations

Laser cooling in solids: advances and prospects

Denis V. Seletskiy, Richard I. Epstein, Mansoor Sheik‐Bahae

This review discusses the progress and ongoing efforts in optical refrigeration. Optical refrigeration is a process in which phonons are removed from a solid by anti-Stokes fluorescence. The review first summarizes the history of optical refrigeration, noting the success in cooling rare-earth-doped solids to cryogenic temperatures. It then examines in detail a four-level model of rare-earth-based optical refrigeration. This model elucidates the essential roles that the various material parameters, such as the spacing of the energy levels and the radiative quantum efficiency, play in the process of optical refrigeration. The review then describes the experimental techniques for cryogenic optical refrigeration of rare-earth-doped solids employing non-resonant and resonant optical cavities. It then examines the work on laser cooling of semiconductors, emphasizing the differences between optical refrigeration of semiconductors and rare-earth-doped solids and the new challenges and advantages of semiconductors. It then describes the significant experimental results including the observed optical refrigeration of CdS nanostructures. The review concludes by discussing the engineering challenges to the development of practical optical refrigerators, and the potential advantages and uses of these refrigerators.

Reports on Progress in Physics•Aug 3, 2016•134 citations

Integrated Diamond Nonlinear Optics

Pawel Latawiec

The past decade has seen an explosion of development in new devices, modalities, and architectures for advanced sensing, computation, and communication. This growth has been driven by the massive investments of large consumer-tech companies in data-hungry domains of customer interest. As these companies develop their products and seek a competitive edge, technologies which can provide advantage across application areas by making computation cheaper, or sensors more knowledgeable, or communication faster, are attracting more interest in and outside academia. Photonics, or the study of how to manipulate light, is a broad-based platform that inherently delivers on these promises. Although photonics has been a part of daily life since the invention of the laser, modern needs and aspirational designs which meet those needs far exceed the capabilities of the platforms which have traditionally constituted the photonics toolkit.\nThere are two specific areas where standard photonic materials are lacking - support for visible wavelengths and functionality for quantum optics. Currently, there are many implementations of systems which use visible light or quantum optics on the tabletop, but the drive to scale these technologies and deliver them to the consumer encounters a roadblock in their size and cost. Visible light sensors, for instance, could greatly benefit from conversion into an integrated photonics platform, where the optical components are printed onto a small substrate. However, the standard materials used for such systems (silicon and indium phosphide) absorb visible light, and other materials (like silicon nitride) do not have the attributes required for advanced functionality. More compellingly, there exist very few material platforms which can host the quantum defects required for next-generation technologies like quantum computation or secure communication.\nThe past decade has seen extensive research into an emerging material platform which can deliver on the ability to bring integrated visible photonics and quantum optics to the same chip - diamond. With a broad transparency region (from UV to the far infrared) and high refractive index, diamond makes an excellent material for run-of-the-mill photonic devices. More importantly, it harbors atom-like defects in its crystal lattice - the nitrogen-vacancy, silicon-vacancy, and germanium-vacancy centers, among many more - which provide a direct interface between the photons circulating within the diamond device and the quantum world. Taken together, these simple properties of diamond constitute a powerful approach towards implementation of advanced quantum technologies, such as repeaters for secure quantum communication or even, one day, computers.\nBefore that future arrives, diamond's capability must first be developed. Diamond has only been available in significant quantities for research use for about a decade, and as such, the processing technologies which are taken for granted in silicon or silicon nitride-based work must be redeveloped. Within the context of photonic devices, we discuss different fabrication strategies and their implications for device design. For visible light devices especially, we investigate methods to reduce sidewall roughness for etched structures.\nInterfacing with diamond photonic structures also brings its own unique set of challenges due to its high refractive index and very small material footprint. To this end, we develop a method termed "loaded tapered-fiber coupling" to optically access large, free-standing diamond devices. For size-limited diamond resonators and waveguides, we also develop auxiliary optical waveguides to act as spot-converters for visible wavelengths, an improvement on previous techniques for telecom-range wavelengths.\nFinally, by synthesizing these improvements in fabrication, we embark on a set of experiments in diamond microresonators. Nonlinear optics is an excellent testbed for such improvements, both for diamond's superlative properties in that regard and their high sensitivity to improvements in fabrication. First, we look at a process known as Raman lasing by constructing long path-length resonators.This technique involves the shifting of an input photon by 40 THz via the interaction with the diamond's crystal lattice.The first demonstration in a diamond integrated device was shown with a pump wavelength of 1600 nm, with an output that was tuned over 100 nm and a low threshold. Leveraging the developments in visible photonics for diamond, a second Raman laser was demonstrated, this time at near-visible (720 nm) wavelengths.This too had a Stokes output which was tunable to over 100 nm and a very low threshold. Raman-specific effects such as polarization conversion were also investigated.\nA cousin to the Raman effect, the Kerr nonlinearity plays a key role in so-called microresonator (or Kerr) frequency combs. We survey the possibilities and difficulties in implementation for a diamond platform, highlighting the competition between the Kerr and Raman nonlinearities. Although the outlook for a technologically relevant Kerr comb in diamond is ultimately pessimistic, avenues for improvement are highlighted. Namely, we investigate via simulation a related class of effects, known as supercontinuum generation.Taking advantage of subtleties of the Raman process in diamond, we can find a preferred geometry which enables generation of a broadband light spectrum natively in diamond.\nFinally, we look at alternative applications of diamond, particularly in high-power systems. Due to its excellent thermal conductivity and power-handling capacity, optics fashioned purely out of diamond can show significant advantages compared to other materials. We end with a discussion of the design principles and results stemming from this work.

•Mar 15, 2018•0 citations
This work reports progress towards demonstrated Raman-based optical refrigeration. Previously [1] we introduced Raman refrigeration and its required photonic structures. Building on the previous, the mechanisms and photonic structures are detailed and simplified proof-of-concept devices described. Three wavelength bands, two illuminated and one dark, are considered. The width of each of these bands is predicated upon the magnitude of the Raman shift of the active layer. Optimally, the first illuminated band is approximately one Raman shift (wavelength) in width. This illuminated band is capped above (at shorter wavelengths) by a dark band. At longer wavelengths a second illuminated band again one Raman shift in width is reflected by photonic structuring that forbids light propagation. The dark bands provide an exhaust through which up energy (anti-Stokes) shifted light can be emitted thereby carrying away heat. The Photonic structure prohibits the propagation of a band of long wavelength light thereby both blocking Stoke’s shifted illuminated band light and reflecting incident light having these wavelengths. The naturally occurring solar spectrum with its light and dark bands caused by atmospheric absorption is a good match to diamond-based Raman refrigeration. Diamond also has extremely low absorption and large Raman cross-section especially in small grain form. Proof-of-concept devices employing simple one-dimensional photonic structures are the focus of present experimental effort. The prospect of broadband refrigeration remains a delicate balance requiring limited absorption and increased Raman cross section through phonon engineering of the Raman active layer.
Described are the prospects for broadband optical refrigeration based on Raman scattering of incoherent light. Laser pumped rare earth fluorescence has been demonstrated and commercial applications are sure to follow. Broadband refrigeration requires strong Raman scattering and large Raman shift. Also required are spectral management and photonic patterning to offset the unfavorable anti-Stoke’s to Stoke’s shift ratio. Materials such as diamond, silicon, and a number of molecular systems are ideal and have low absorption. Optics splits the broadband spectrum into light and dark bands with width corresponding to the Raman shift. Broadband spectrums where photon flux decreases with increasing photon energy are ideal. By tailoring the incoming spectrum, by utilizing extremely transparent strong Raman shift materials and by photonic inhibition of Stoke’s shifted light the prospect become feasible. The Raman optical cross- section increases with decreasing particle size (until the particle become too small to support the Raman-phonons). Where conservation of phonon states in these truncated Brillioun-zone particles requires an increased density (number/cm3) of the allowed-states to compensate for states lost to particle size. Nonetheless, the anti-Stokes to Stokes ratio is approximately one-to-two at laboratory temperature. Thin film deposited diamond is an excellent candidate for refrigeration applications due to its high transparency small grain size and its large Raman magnitude and large shift. Simple one-dimensional photonic structures selectively inhibit the Stoke’s shifted light making refrigeration possible.
The laser cooling of vibrational states of solids has been achieved through photoluminescence in rare-earth elements, optical forces in optomechanics, and the Brillouin scattering light-sound interaction. The net cooling of solids through spontaneous Raman scattering, and laser refrigeration of indirect band gap semiconductors, both remain unsolved challenges. Here, we analytically show that photonic density of states (DoS) engineering can address the two fundamental requirements for achieving spontaneous Raman cooling: suppressing the dominance of Stokes (heating) transitions, and the enhancement of anti-Stokes (cooling) efficiency beyond the natural optical absorption of the material. We develop a general model for the DoS modification to spontaneous Raman scattering probabilities, and elucidate the necessary and minimum condition required for achieving net Raman cooling. With a suitably engineered DoS, we establish the enticing possibility of refrigeration of intrinsic silicon by annihilating phonons from all its Raman-active modes simultaneously, through a single telecom wavelength pump. This result points to a highly flexible approach for laser cooling of any transparent semiconductor, including indirect band gap semiconductors, far away from significant optical absorption, band-edge states, excitons, or atomic resonances.
Optical refrigeration using anti-Stokes photoluminescence is now well established, especially for rare-earth-doped solids where cooling to cryogenic temperatures has recently been achieved. The cooling efficiency of optical refrigeration is constrained by the requirement that the increase in entropy of the photon field must be greater than the decrease in entropy of the sample. Laser radiation has been used in all demonstrated cases of optical refrigeration with the intention of minimizing the entropy of the absorbed photons. In this presentation, I will show that as long as the incident radiation is unidirectional, the loss of coherence does not significantly affect the cooling efficiency. Using a general formulation of radiation entropy as the von Neumann entropy of the photon field, I will show how the cooling efficiency depends on the properties of the light source such as wavelength, coherence, and directionality. These results suggest that the laws of thermodynamics permit optical cooling of materials with incoherent sources such as light emitting diodes and filtered sunlight almost as efficiently as with lasers.
Optical refrigeration using anti-Stokes photoluminescence is now well established, especially for rare-earth-doped solids where cooling to cryogenic temperatures has recently been achieved. The cooling efficiency of optical refrigeration is constrained by the requirement that the increase in the entropy of the photon field must be greater than the decrease in the entropy of the sample. Laser radiation has been used in all demonstrated cases of optical refrigeration with the intention of minimizing the entropy of the absorbed photons. Here, we show that as long as the incident radiation is unidirectional, the loss of coherence does not significantly affect the cooling efficiency. Using a general formulation of radiation entropy as the von Neumann entropy of the photon field, we show how the cooling efficiency depends on the properties of the light source, such as wavelength, coherence, and directionality. Our results suggest that the laws of thermodynamics permit optical cooling of materials with incoherent sources, such as light emitting diodes and filtered sunlight, almost as efficiently as with lasers. Our findings have significant and immediate implications for design of compact all-solid-state devices cooled via optical refrigeration.
This review discusses the progress and ongoing efforts in optical refrigeration. Optical refrigeration is a process in which phonons are removed from a solid by anti-Stokes fluorescence. The review first summarizes the history of optical refrigeration, noting the success in cooling rare-earth-doped solids to cryogenic temperatures. It then examines in detail a four-level model of rare-earth-based optical refrigeration. This model elucidates the essential roles that the various material parameters, such as the spacing of the energy levels and the radiative quantum efficiency, play in the process of optical refrigeration. The review then describes the experimental techniques for cryogenic optical refrigeration of rare-earth-doped solids employing non-resonant and resonant optical cavities. It then examines the work on laser cooling of semiconductors, emphasizing the differences between optical refrigeration of semiconductors and rare-earth-doped solids and the new challenges and advantages of semiconductors. It then describes the significant experimental results including the observed optical refrigeration of CdS nanostructures. The review concludes by discussing the engineering challenges to the development of practical optical refrigerators, and the potential advantages and uses of these refrigerators.
The past decade has seen an explosion of development in new devices, modalities, and architectures for advanced sensing, computation, and communication. This growth has been driven by the massive investments of large consumer-tech companies in data-hungry domains of customer interest. As these companies develop their products and seek a competitive edge, technologies which can provide advantage across application areas by making computation cheaper, or sensors more knowledgeable, or communication faster, are attracting more interest in and outside academia. Photonics, or the study of how to manipulate light, is a broad-based platform that inherently delivers on these promises. Although photonics has been a part of daily life since the invention of the laser, modern needs and aspirational designs which meet those needs far exceed the capabilities of the platforms which have traditionally constituted the photonics toolkit.\nThere are two specific areas where standard photonic materials are lacking - support for visible wavelengths and functionality for quantum optics. Currently, there are many implementations of systems which use visible light or quantum optics on the tabletop, but the drive to scale these technologies and deliver them to the consumer encounters a roadblock in their size and cost. Visible light sensors, for instance, could greatly benefit from conversion into an integrated photonics platform, where the optical components are printed onto a small substrate. However, the standard materials used for such systems (silicon and indium phosphide) absorb visible light, and other materials (like silicon nitride) do not have the attributes required for advanced functionality. More compellingly, there exist very few material platforms which can host the quantum defects required for next-generation technologies like quantum computation or secure communication.\nThe past decade has seen extensive research into an emerging material platform which can deliver on the ability to bring integrated visible photonics and quantum optics to the same chip - diamond. With a broad transparency region (from UV to the far infrared) and high refractive index, diamond makes an excellent material for run-of-the-mill photonic devices. More importantly, it harbors atom-like defects in its crystal lattice - the nitrogen-vacancy, silicon-vacancy, and germanium-vacancy centers, among many more - which provide a direct interface between the photons circulating within the diamond device and the quantum world. Taken together, these simple properties of diamond constitute a powerful approach towards implementation of advanced quantum technologies, such as repeaters for secure quantum communication or even, one day, computers.\nBefore that future arrives, diamond's capability must first be developed. Diamond has only been available in significant quantities for research use for about a decade, and as such, the processing technologies which are taken for granted in silicon or silicon nitride-based work must be redeveloped. Within the context of photonic devices, we discuss different fabrication strategies and their implications for device design. For visible light devices especially, we investigate methods to reduce sidewall roughness for etched structures.\nInterfacing with diamond photonic structures also brings its own unique set of challenges due to its high refractive index and very small material footprint. To this end, we develop a method termed "loaded tapered-fiber coupling" to optically access large, free-standing diamond devices. For size-limited diamond resonators and waveguides, we also develop auxiliary optical waveguides to act as spot-converters for visible wavelengths, an improvement on previous techniques for telecom-range wavelengths.\nFinally, by synthesizing these improvements in fabrication, we embark on a set of experiments in diamond microresonators. Nonlinear optics is an excellent testbed for such improvements, both for diamond's superlative properties in that regard and their high sensitivity to improvements in fabrication. First, we look at a process known as Raman lasing by constructing long path-length resonators.This technique involves the shifting of an input photon by 40 THz via the interaction with the diamond's crystal lattice.The first demonstration in a diamond integrated device was shown with a pump wavelength of 1600 nm, with an output that was tuned over 100 nm and a low threshold. Leveraging the developments in visible photonics for diamond, a second Raman laser was demonstrated, this time at near-visible (720 nm) wavelengths.This too had a Stokes output which was tunable to over 100 nm and a very low threshold. Raman-specific effects such as polarization conversion were also investigated.\nA cousin to the Raman effect, the Kerr nonlinearity plays a key role in so-called microresonator (or Kerr) frequency combs. We survey the possibilities and difficulties in implementation for a diamond platform, highlighting the competition between the Kerr and Raman nonlinearities. Although the outlook for a technologically relevant Kerr comb in diamond is ultimately pessimistic, avenues for improvement are highlighted. Namely, we investigate via simulation a related class of effects, known as supercontinuum generation.Taking advantage of subtleties of the Raman process in diamond, we can find a preferred geometry which enables generation of a broadband light spectrum natively in diamond.\nFinally, we look at alternative applications of diamond, particularly in high-power systems. Due to its excellent thermal conductivity and power-handling capacity, optics fashioned purely out of diamond can show significant advantages compared to other materials. We end with a discussion of the design principles and results stemming from this work.