Superconducting qubit circuits are one of the prime candidates for building the quantum computer. In this guide I will provide a complete microwave description of the superconducting qubit circuits consisting of the most popular superconducting qubit the "Transmon". Quantum interaction rate parameters related to simple impedance response formulas will allow microwave engineers to design and analyze superconducting qubit circuits without resorting to heavy machinery of quantum mechanical transformations. All formulas listed below are valid in the dispersive regime of low anharmonicity qubits. This work is a review of [1].
Superconducting qubit circuits are one of the prime candidates for building the quantum computer. In this guide I will provide a complete microwave description of the superconducting qubit circuits consisting of the most popular superconducting qubit the "Transmon". Quantum interaction rate parameters related to simple impedance response formulas will allow microwave engineers to design and analyze superconducting qubit circuits without resorting to heavy machinery of quantum mechanical transformations. All formulas listed below are valid in the dispersive regime of low anharmonicity qubits. This work is a review of [1].
For superconducting quantum processors consisting of low anharmonicity qubits such as transmons, we give a complete microwave description of the system in the qubit subspace. We assume that the qubits are dispersively coupled to a distributed microwave structure such that the detunings of the qubits from the internal modes of the microwave structure are stronger than their couplings. We define “qubit ports” across the terminals of the Josephson junctions and “drive ports” where transmission lines carrying drive signals reach the chip and we obtain the multiport impedance response of the linear passive part of the system between the ports. We then relate interaction parameters in between qubits and between the qubits and the environment to the entries of this multiport impedance function; in particular, we show that the exchange coupling rate J between qubits is related in a simple way to the off-diagonal entry connecting the qubit ports. Similarly, we relate couplings of the qubits to voltage drives and lossy environment to the entries connecting the qubits and the drive ports. Our treatment takes into account all the modes (possibly infinite) that might be present in the distributed electromagnetic structure and provides an efficient method for the modeling and analysis of the circuits.
As superconducting circuits emerge as a leading platform for scalable quantum information processing, building comprehensive bridges from the foundational principles of macroscopic quantum phenomena to the architecture of modern quantum devices is increasingly essential for introducing new researchers to the field. This tutorial provides a self-contained, pedagogical introduction to superconducting quantum circuits at the undergraduate level. Beginning with an overview of superconductivity and the Josephson effect, the tutorial systematically develops the quantization of microwave circuits into the framework of circuit quantum electrodynamics (cQED). The transmon qubit is then introduced as a state-of-the-art application, with a detailed derivation of its Hamiltonian and its interaction with control and readout circuitry. The theoretical formalism is consolidated through a numerical simulation of vacuum Rabi oscillations in a driven transmon-resonator system, a canonical experiment that demonstrates the coherent energy exchange characteristic of the strong coupling regime. This work serves as a foundational guide and first point of contact, equipping students and researchers with the conceptual and mathematical tools necessary to understand and engineer superconducting quantum hardware.
The aim of this review is to provide quantum engineers with an introductory guide to the central concepts and challenges in the rapidly accelerating field of superconducting quantum circuits. Over the past twenty years, the field has matured from a predominantly basic research endeavor to a one that increasingly explores the engineering of larger-scale superconducting quantum systems. Here, we review several foundational elements—qubit design, noise properties, qubit control, and readout techniques—developed during this period, bridging fundamental concepts in circuit quantum electrodynamics and contemporary, state-of-the-art applications in gate-model quantum computation.
Superconducting circuits consisting of a few low-anharmonic transmons coupled to readout and bus resonators can perform basic quantum computations. Since the number of qubits in such circuits is limited to not more than a few tens, the qubits can be designed to operate within the dispersive regime where frequency detunings are much stronger than coupling strengths. However, scaling up the number of qubits will bring the circuit out of the regime, and this invalidates current theories. We develop a formalism that allows to consistently diagonalize the superconducting circuit Hamiltonian beyond the dispersive regime. This will allow to study qubit-qubit interaction unperturbatively, therefore, our formalism remains valid and accurate at small or even negligible frequency detuning; thus, our formalism serves as a theoretical ground for designing qubit characteristics for scaling up the number of qubits in superconducting circuits. We study the most important circuits with single- and two-qubit gates, i.e., a single transmon coupled to a resonator and two transmons sharing a bus resonator. Surprisingly, our formalism allows to determine the circuit characteristics, such as dressed frequencies and Kerr couplings, in closed-form formulas that not only reproduce perturbative results, but also extrapolate beyond the dispersive regime and can ultimately reproduce (and even modify) the Jaynes-Cumming results at resonant frequencies.
The precise engineering of electromagnetic couplings is paramount for constructing scalable and high-fidelity superconducting quantum processors. While essential for orchestrating qubit operations, these couplings also present significant design challenges, including the mitigation of crosstalk and the management of environmental decoherence. A clear and unified theoretical framework is therefore crucial for the design, simulation, and analysis of these complex quantum circuits. This paper presents a comprehensive theoretical treatment of the fundamental electromagnetic coupling mechanisms in superconducting devices. Starting from first principles, we formulate the equations of motion and derive the input-output relations for canonical systems, including a single resonator coupled to a multi-port microwave network, interacting resonators, and coupled transmission lines. We review rigorous definitions for key parameters such as the energy decay rate (κ) and the dimensionless coupling coefficient (ζ) and connect these formalisms to practical methods of parameter extraction from electromagnetic simulations. This work provides a rigorous and pedagogical foundation for understanding and modeling linear electromagnetic interactions, serving as a vital resource for the development of advanced superconducting quantum hardware.
The quest to design a realizable quantum computer is a dream for many for the past few decades. At the moment, one of the promising designs is the transmon qubit, which is a superconducting qubit is the focus of this work. In order to analyze and design different components of a quantum chip, an understanding of the circuitry is required. By varying the circuit parameters, one can design the system according to requirements by constructing the required physical geometry that incorporates the design parameters. In this thesis work, part of the focus was to understand the transmon qubit circuit parameters, extract the circuit parameters such as capacitances from a physical geometry, build analytic and numerical 3D FEM models. Using a circuit model of the qubit system, the interdependence of the resonators that connects qubits with each other can be studied. Their resonances play a role in the qubit Hamiltonian and can be estimated by constructing accurate simulation models. This problem statement has been dealt with in the thesis work by constructing a hybrid circuitry of standard circuit components and 3D FEM simulated qubit unit cells. The quality factor of the measurement readout resonator of a qubit system needs to be characterized in a qubit system in order to target the rate and resolution at which the measurements can be done. In order to do so, the circuit parameters that affect the quality factor needs to be investigated. This problem statement has also been treated in this work.