Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Workshop on Advances in Sensors and Interfaces (IWASI)

SPINE (SPIN Emulator) - A Quantum-Electronics Interface Simulator

Jeroen P. G. van Dijk, Andrei Vladimirescu, Masoud Babaie, Edoardo Charbon A, Fabio Sebastiano

Published Jun 1, 2019• 12 citations
Publisher

Abstract

A quantum computer comprises a quantum processor and the associated control electronics used to manipulate the qubits at the core of a quantum processor. CMOS circuits placed close to the quantum bits and operating at cryogenic temperatures offer the best solution for the control of millions of qubits. The performance requirements of the electronics are very stringent and its design requires the simultaneous optimization of both the circuits and the quantum system. This paper presents the SPINE (SPIN Emulator) toolset for the co-design and co-optimization of electronic/quantum systems. It comprises a SPICE simulator enhanced with a Verilog-A model based on a Hamiltonian solver emulating the quantum behavior of single-electron spin qubits. A co-design methodology is proposed to derive on the one hand the specifications of the electrical signals to be applied to and captured from the qubits, and to ensure on the other hand, the compliance of the electronics in generating the required signals. This methodology results in an optimized qubit performance while considering practical trade-offs in the control circuits, such as power consumption, complexity and cost as proven by a practical design example.

DOI
10.1109/iwasi.2019.8791334

Related papers

A co-design methodology for scalable quantum processors and their classical electronic interface

Jeroen P. G. van Dijk, Andrei Vladimirescu, Masoud Babaie +2 more

A quantum computer fundamentally comprises a quantum processor and a classical controller. The classical electronic controller is used to correct and manipulate the qubits, the core components of a quantum processor. To enable quantum computers scalable to millions of qubits, as required in practical applications, the simultaneous optimization of both the classical electronic and quantum systems is needed. In this paper, a co-design methodology is proposed for obtaining an optimized qubit performance while considering practical trade-offs in the control circuits, such as power consumption, complexity, and cost. The SPINE (SPIN Emulator) toolset is introduced for the co-design and co-optimization of electronic/quantum systems. It comprises a circuit simulator enhanced with a Verilog-A model emulating the quantum behavior of single-electron spin qubits. Design examples show the effectiveness of the proposed methodology in the optimization, design and verification of a whole electronic/quantum system.

Design, Automation, and Test in Europe•Mar 1, 2018•16 citations

Circuit models for the co-simulation of superconducting quantum computing systems

Rohith Acharya, Fahd A. Mohiyaddin, Anton Potočnik +5 more

Quantum computers based on superconducting qubits have emerged as a leading candidate for a scalable quantum processor architecture. The core of a quantum processor consists of quantum devices that are manipulated using classical electronic circuits, which need to be co-designed for optimal performance and operation. As the principles governing the behavior of the classical circuits and the quantum devices are different, this presents a unique challenge in terms of the simulation, design and optimization of the joint system. A methodology is presented to transform the behavior of small-scale quantum processors to equivalent circuit models that are usable with classical circuits in a generic electrical simulator, enabling the detailed analysis of the impact of many important non-idealities. The methodology has specifically been employed to derive a circuit model of a superconducting qubit interacting with the quantized electromagnetic field of a superconducting resonator. Based on this technique, a comprehensive analysis of the qubit operation is performed, including the coherent control and readout of the qubit using electrical signals. Furthermore, the effect of several non-idealities in the system such as qubit relaxation, decoherence and leakage out of the computational subspace are captured, in contrast to previous works. As the presented method enables the co-simulation of the control electronics with the quantum system, it facilitates the design and optimization of near-term superconducting quantum processors.

Design, Automation, and Test in Europe•Feb 1, 2021•8 citations

Cryo-CMOS Electronic Control for Scalable Quantum Computing

Fabio Sebastiano, Harald Homulle, Bishnu Patra +6 more

Quantum computers1 could revolutionize computing in a profound way due to the massive speedup they promise. A quantum computer comprises a cryogenic quantum processor and a classical electronic controller. When scaling up the cryogenic quantum processor to at least a few thousands, and possibly millions, of qubits required for any practical quantum algorithm, cryogenic CMOS (cryo-CMOS) electronics is required to allow feasible and compact interconnections between the controller and the quantum processor. Cryo-CMOS leverages the CMOS fabrication infrastructure while exploiting the continuous improvement of performance and miniaturization guaranteed by Moore's law, in order to enable the fabrication of a cost-effective practical quantum computer. However, designing cryo-CMOS integrated circuits requires a new set of CMOS device models, their embedding in design and verification tools, and the possibility to co-simulate the cryo-CMOS/quantum-processor architecture for full-system optimization. In this paper, we address these challenges by focusing on their impact on the design of complex cryo-CMOS systems.

ACM/IEEE Design Automation Conference (DAC)•Jun 13, 2017•78 citations

Designing the Electronic Interface for Qubit Control

Jeroen P. G. van Dijk

Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.

•Sep 15, 2021•4 citations

On-Chip Cryogenic Read-Out of Spin Qubit for Quantum Computers

Bahador Valizadehpasha

Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.

•Jan 1, 2016•0 citations

Designing a DDS-Based SoC for High-Fidelity Multi-Qubit Control

Jeroen P. G. van Dijk, Bishnu Patra, Stefano Pellerano +3 more

The design of a large-scale quantum computer requires co-optimization of both the quantum bits (qubits) and their control electronics. This work presents the first systematic design of such a controller to simultaneously and accurately manipulate the states of multiple spin qubits or transmons. By employing both analytical and simulation techniques, the detailed electrical specifications of the controller have been derived for a single-qubit gate fidelity of 99.99% and validated using a qubit Hamiltonian simulator. Trade-offs between several architectures with different levels of digitization are discussed, resulting in the selection of a highly digital DDS-based solution. Initiating from the system specifications, a complete error budget for the various analog and digital circuit blocks is drafted and their detailed electrical specifications, such as signal power, linearity, spurs and noise, are derived to obtain a digital-intensive power-optimized multi-qubit controller. A power consumption estimate demonstrates the feasibility of such a system in a nanometer CMOS technology node. Finally, application examples, including qubit calibration and multi-qubit excitation, are simulated with the proposed controller to demonstrate its efficacy. The proposed methodology, and more specifically, the proposed error budget lay the foundations for the design of a scalable electronic controller enabling large-scale quantum computers with practical applications.

IEEE Transactions on Circuits and Systems I Regular Papers•Sep 9, 2020•37 citations
A quantum computer comprises a quantum processor and the associated control electronics used to manipulate the qubits at the core of a quantum processor. CMOS circuits placed close to the quantum bits and operating at cryogenic temperatures offer the best solution for the control of millions of qubits. The performance requirements of the electronics are very stringent and its design requires the simultaneous optimization of both the circuits and the quantum system. This paper presents the SPINE (SPIN Emulator) toolset for the co-design and co-optimization of electronic/quantum systems. It comprises a SPICE simulator enhanced with a Verilog-A model based on a Hamiltonian solver emulating the quantum behavior of single-electron spin qubits. A co-design methodology is proposed to derive on the one hand the specifications of the electrical signals to be applied to and captured from the qubits, and to ensure on the other hand, the compliance of the electronics in generating the required signals. This methodology results in an optimized qubit performance while considering practical trade-offs in the control circuits, such as power consumption, complexity and cost as proven by a practical design example.
A quantum computer fundamentally comprises a quantum processor and a classical controller. The classical electronic controller is used to correct and manipulate the qubits, the core components of a quantum processor. To enable quantum computers scalable to millions of qubits, as required in practical applications, the simultaneous optimization of both the classical electronic and quantum systems is needed. In this paper, a co-design methodology is proposed for obtaining an optimized qubit performance while considering practical trade-offs in the control circuits, such as power consumption, complexity, and cost. The SPINE (SPIN Emulator) toolset is introduced for the co-design and co-optimization of electronic/quantum systems. It comprises a circuit simulator enhanced with a Verilog-A model emulating the quantum behavior of single-electron spin qubits. Design examples show the effectiveness of the proposed methodology in the optimization, design and verification of a whole electronic/quantum system.
Quantum computers based on superconducting qubits have emerged as a leading candidate for a scalable quantum processor architecture. The core of a quantum processor consists of quantum devices that are manipulated using classical electronic circuits, which need to be co-designed for optimal performance and operation. As the principles governing the behavior of the classical circuits and the quantum devices are different, this presents a unique challenge in terms of the simulation, design and optimization of the joint system. A methodology is presented to transform the behavior of small-scale quantum processors to equivalent circuit models that are usable with classical circuits in a generic electrical simulator, enabling the detailed analysis of the impact of many important non-idealities. The methodology has specifically been employed to derive a circuit model of a superconducting qubit interacting with the quantized electromagnetic field of a superconducting resonator. Based on this technique, a comprehensive analysis of the qubit operation is performed, including the coherent control and readout of the qubit using electrical signals. Furthermore, the effect of several non-idealities in the system such as qubit relaxation, decoherence and leakage out of the computational subspace are captured, in contrast to previous works. As the presented method enables the co-simulation of the control electronics with the quantum system, it facilitates the design and optimization of near-term superconducting quantum processors.
Quantum computers1 could revolutionize computing in a profound way due to the massive speedup they promise. A quantum computer comprises a cryogenic quantum processor and a classical electronic controller. When scaling up the cryogenic quantum processor to at least a few thousands, and possibly millions, of qubits required for any practical quantum algorithm, cryogenic CMOS (cryo-CMOS) electronics is required to allow feasible and compact interconnections between the controller and the quantum processor. Cryo-CMOS leverages the CMOS fabrication infrastructure while exploiting the continuous improvement of performance and miniaturization guaranteed by Moore's law, in order to enable the fabrication of a cost-effective practical quantum computer. However, designing cryo-CMOS integrated circuits requires a new set of CMOS device models, their embedding in design and verification tools, and the possibility to co-simulate the cryo-CMOS/quantum-processor architecture for full-system optimization. In this paper, we address these challenges by focusing on their impact on the design of complex cryo-CMOS systems.
Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.
Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.
The design of a large-scale quantum computer requires co-optimization of both the quantum bits (qubits) and their control electronics. This work presents the first systematic design of such a controller to simultaneously and accurately manipulate the states of multiple spin qubits or transmons. By employing both analytical and simulation techniques, the detailed electrical specifications of the controller have been derived for a single-qubit gate fidelity of 99.99% and validated using a qubit Hamiltonian simulator. Trade-offs between several architectures with different levels of digitization are discussed, resulting in the selection of a highly digital DDS-based solution. Initiating from the system specifications, a complete error budget for the various analog and digital circuit blocks is drafted and their detailed electrical specifications, such as signal power, linearity, spurs and noise, are derived to obtain a digital-intensive power-optimized multi-qubit controller. A power consumption estimate demonstrates the feasibility of such a system in a nanometer CMOS technology node. Finally, application examples, including qubit calibration and multi-qubit excitation, are simulated with the proposed controller to demonstrate its efficacy. The proposed methodology, and more specifically, the proposed error budget lay the foundations for the design of a scalable electronic controller enabling large-scale quantum computers with practical applications.