Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics D Applied Physics

Spectrum demodulating polarimeter based on weak measurement with a phase modulation

Dongmei Li, Yonghong He, Yi Ruan, Qiang Lin, Kan Li

Published Aug 7, 2019• 3 citations
Publisher

Abstract

Abstract A phase modulated scheme was presented in a weak measurement based polarimeter, which was realized with spectrum demodulation for the polarization detection. According to the calculation, the phase difference between two orthogonal polarizations reveals a unique feature to enhance the weak value of the system, further optimizing the sensitivity of polarization detection. With the weak measurement in the frequency domain, the polarization angle was monitored in real time by fitting the central wavelength of the output spectrum. Applying an SBC for the phase adjustment, we demonstrated the significance of phase modification in this polarimeter theoretically and experimentally. It follows that an initial phase addition of −1.4958 rad improved the sensitivity, which was about 8.5 times higher than previous weak measurement based polarimeter. As a consequence, besides the advantages of weak measurement for optical rotation detection with spectrum demodulation, a phase modulated polarimeter with a high sensitivity exhibited great potential in investigations involving polarization detection.

DOI
10.1088/1361-6463/ab3974

Related papers

A Bio-molecular Sensor Based on Optical Weak Measurement

Nian Xiong, Xiangnan Wang, Lixuan Shi +3 more

Abstract We developed a phase-sensitive sensor based on the optical weak measurement for label-free detection of biomolecular interaction. The weak value amplification system can be implemented in common-path with total internal reflection structure. The phase difference between p and s polarizations caused by biomolecular recognition is measured by the central wavelength shift of the frequency domain weak measurement system. Structure of p and s polarizations in common-path makes system robust and stable. The applicability is illustrated by real-time monitoring interaction of biomolecules.

Journal of Physics Conference Series•Aug 1, 2019•0 citations

Measuring angular rotation via the rotatory dispersion effect

Chongqi Zhou, Suyi Zhong, Kaijie Ma +3 more

We propose a scheme for an ultrasensitive weak measurement system with an ultrasmall rotatory dispersion effect to measure angular rotation. Estimation of angular rotation is obtained by the shift of the center wavelength. In our scheme, we obtain a continuously adjustable coupling strength and show that our system provides a 13 times higher sensitivity of 38 840 nm/rad compared with previous work. Here we demonstrate that our scheme may offer an optimal weak value ${A}_{w}$ in practice and outperforms conventional measurements in the presence of technical noise. The precision achieved by optimized weak value amplification (WVA) is about three times higher than that of a polarimeter. Our work extends the working regime of WVA. Its simplicity and robustness clear the way for widespread use of WVA involving measurements with commercial cameras and small signals.

Physical Review A•Dec 22, 2020•11 citations

Noise mitigation for high-sensitivity phase estimation based on weak measurements

Xiaorui Tan, Hongjing Li, Qi Song +6 more

Phase estimation has attracted much attention in the field of sensing, where weak measurement has become an effective solution for the study of small physical quantities because of its anomalous amplification property. However, it is difficult for weak measurement to cope with large low-frequency noise signals in the environment due to its extremely narrow linear range, which makes the extension of weak measurement to practical applications a challenging task. In order to solve this issue, we propose and experimentally verify a phase demodulation scheme based on weak measurement, which solves the problem of working point offset caused by the noise through artificially introducing a high-frequency carrier and performing demodulation operations on the output light. The experimental results show that the scheme can improve the signal-to-noise ratio by 17 dB compared to standard weak measurement and ensures low distortion in phase demodulation. Moreover, the scheme is not limited to a specific modulation depth, which greatly improves the robustness of the scheme.

Physical Review A•May 8, 2024•3 citations

Adaptive correction of phase estimation with time based on weak measurement

Gongling Wang, Hongjing Li, Tailong Xiao +2 more

An adaptive correction algorithm is demonstrated based on weak measurement, which introduces a feedback and an additional interaction to the system and can dynamically adjust the operating point in accordance with the condition of the estimated phase change. Two schemes, fast adaptive correction and slow adaptive correction, are proposed for different conditions of the modulation device. Fast adaptive correction scheme can realize a real-time correction and maintain the high sensitivity. Slow adaptive correction scheme, as a supplement, can correct the distortion of the measured parameter by changing the measuring period. These two schemes are useful for high precision phase estimation with time in modern physics and practical applications, including, but not limited to, timing synchronization, accurate distance measurement, and gravity wave detection. Moreover, we discuss the deviation of the adaptive correction for considering system noise in practical measurement.

Optics Express•Nov 2, 2021•11 citations

Retaining high precision and sensitivity for an extended range of phase estimation via modulated weak measurement

Zhaoxue Li, Jiangdong Qiu, Linguo Xie +5 more

We theoretically propose and experimentally demonstrate a modulated weak measurement scheme that permits a precise estimation of the extended phase shift. By choosing the frequency and the total post-selected light intensity as the input and output meter variables, respectively, a linear weak measurement model is established that is especially applicable to precise phase estimation. By performing a time-delay-dependent modulation strategy based on the feedback modulation of the experimental outcome, both the high phase-sensitivity and measurement precision can be retained. We have achieved a precision at the order of ∼10−5 rad that can be effectively retained with an increase in the measured phase.

Applied Physics Letters•Nov 5, 2018•14 citations

Polarization-based cyclic weak value metrology for angular-velocity measurement

Zi-Rui Zhong, Yue Chen, Weijun Tan +2 more

Weak measurement has been proven to amplify the detection of changes in meters while discarding most photons due to the low probability of postselection. Previous power-recycling schemes enable the failed postselection photons to be repeatedly selected, thus overcoming the inefficient postselection and increasing the precision of detection. In this study, we focus on the polarization-based weak value angular-velocity measurement and introduce three cyclic methods to enhance the accuracy of detecting time shifts in a Gaussian beam: power-recycling, signal-recycling, and dual-recycling schemes. By incorporating one or two partially transmitting mirrors into the system, both the power and the signal-to-noise ratio of the detected light are substantially enhanced. Compared to nonpolarization schemes, polarization-based approaches offer several advantages, including lower optical loss, unique cyclic directions, and a wider optimal region. These features effectively reduce crosstalk among different light paths and theoretically eliminate the walk-off effect, thus yielding improvements in both theoretical performance and application.

arXiv:2309.11041•Physical Review A•Apr 1, 2024•7 citations
Abstract A phase modulated scheme was presented in a weak measurement based polarimeter, which was realized with spectrum demodulation for the polarization detection. According to the calculation, the phase difference between two orthogonal polarizations reveals a unique feature to enhance the weak value of the system, further optimizing the sensitivity of polarization detection. With the weak measurement in the frequency domain, the polarization angle was monitored in real time by fitting the central wavelength of the output spectrum. Applying an SBC for the phase adjustment, we demonstrated the significance of phase modification in this polarimeter theoretically and experimentally. It follows that an initial phase addition of −1.4958 rad improved the sensitivity, which was about 8.5 times higher than previous weak measurement based polarimeter. As a consequence, besides the advantages of weak measurement for optical rotation detection with spectrum demodulation, a phase modulated polarimeter with a high sensitivity exhibited great potential in investigations involving polarization detection.
Abstract We developed a phase-sensitive sensor based on the optical weak measurement for label-free detection of biomolecular interaction. The weak value amplification system can be implemented in common-path with total internal reflection structure. The phase difference between p and s polarizations caused by biomolecular recognition is measured by the central wavelength shift of the frequency domain weak measurement system. Structure of p and s polarizations in common-path makes system robust and stable. The applicability is illustrated by real-time monitoring interaction of biomolecules.
We propose a scheme for an ultrasensitive weak measurement system with an ultrasmall rotatory dispersion effect to measure angular rotation. Estimation of angular rotation is obtained by the shift of the center wavelength. In our scheme, we obtain a continuously adjustable coupling strength and show that our system provides a 13 times higher sensitivity of 38 840 nm/rad compared with previous work. Here we demonstrate that our scheme may offer an optimal weak value Aw{A}_{w}Aw​ in practice and outperforms conventional measurements in the presence of technical noise. The precision achieved by optimized weak value amplification (WVA) is about three times higher than that of a polarimeter. Our work extends the working regime of WVA. Its simplicity and robustness clear the way for widespread use of WVA involving measurements with commercial cameras and small signals.
Phase estimation has attracted much attention in the field of sensing, where weak measurement has become an effective solution for the study of small physical quantities because of its anomalous amplification property. However, it is difficult for weak measurement to cope with large low-frequency noise signals in the environment due to its extremely narrow linear range, which makes the extension of weak measurement to practical applications a challenging task. In order to solve this issue, we propose and experimentally verify a phase demodulation scheme based on weak measurement, which solves the problem of working point offset caused by the noise through artificially introducing a high-frequency carrier and performing demodulation operations on the output light. The experimental results show that the scheme can improve the signal-to-noise ratio by 17 dB compared to standard weak measurement and ensures low distortion in phase demodulation. Moreover, the scheme is not limited to a specific modulation depth, which greatly improves the robustness of the scheme.
An adaptive correction algorithm is demonstrated based on weak measurement, which introduces a feedback and an additional interaction to the system and can dynamically adjust the operating point in accordance with the condition of the estimated phase change. Two schemes, fast adaptive correction and slow adaptive correction, are proposed for different conditions of the modulation device. Fast adaptive correction scheme can realize a real-time correction and maintain the high sensitivity. Slow adaptive correction scheme, as a supplement, can correct the distortion of the measured parameter by changing the measuring period. These two schemes are useful for high precision phase estimation with time in modern physics and practical applications, including, but not limited to, timing synchronization, accurate distance measurement, and gravity wave detection. Moreover, we discuss the deviation of the adaptive correction for considering system noise in practical measurement.
We theoretically propose and experimentally demonstrate a modulated weak measurement scheme that permits a precise estimation of the extended phase shift. By choosing the frequency and the total post-selected light intensity as the input and output meter variables, respectively, a linear weak measurement model is established that is especially applicable to precise phase estimation. By performing a time-delay-dependent modulation strategy based on the feedback modulation of the experimental outcome, both the high phase-sensitivity and measurement precision can be retained. We have achieved a precision at the order of ∼10−5 rad that can be effectively retained with an increase in the measured phase.
Weak measurement has been proven to amplify the detection of changes in meters while discarding most photons due to the low probability of postselection. Previous power-recycling schemes enable the failed postselection photons to be repeatedly selected, thus overcoming the inefficient postselection and increasing the precision of detection. In this study, we focus on the polarization-based weak value angular-velocity measurement and introduce three cyclic methods to enhance the accuracy of detecting time shifts in a Gaussian beam: power-recycling, signal-recycling, and dual-recycling schemes. By incorporating one or two partially transmitting mirrors into the system, both the power and the signal-to-noise ratio of the detected light are substantially enhanced. Compared to nonpolarization schemes, polarization-based approaches offer several advantages, including lower optical loss, unique cyclic directions, and a wider optimal region. These features effectively reduce crosstalk among different light paths and theoretically eliminate the walk-off effect, thus yielding improvements in both theoretical performance and application.