Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Atomic measurements of high-intensity VHF-band radio-frequency fields with a Rydberg vapor-cell detector

Éric Paradis, Georg A. Raithel, David Alexander Anderson

Published Jul 30, 2019• 61 citations
Publisher

Abstract

We investigate and employ optical Rydberg resonances in an atomic vapor cell for measurements of high-intensity VHF-band radio frequency (rf) electric fields. An atomic vapor cell with integrated electrodes is used to generate high-intensity 50--500 MHz rf electric fields reaching $\ensuremath{\sim}5$ kV/m in a submillimeter gap. The fields are measured using Rydberg electromagnetically induced transparency as an optical readout of field-sensitive $30{D}_{J}$ and $35{D}_{J}$ Rydberg states of atoms within the gap. The rf electric field is determined by matching observed spectroscopic markers, including ac level shifts, even-harmonic rf sidebands, and rf-induced avoided crossings in the Rydberg manifold to calculated spectra derived from a nonperturbative Floquet theory. In our measurements, rf field frequencies and electric-field amplitudes are determined to an accuracy of $1.0%$ and $1.5%$, respectively. In the atom-field interaction, we observe a transition from a quantum regime, characterized by discrete even-harmonic Floquet states separated by an even multiple of the rf field frequency, into a semiclassical regime at very strong fields, in which the spectrum exhibits unresolved resonances whose strengths are smoothly modulated at a frequency of approximately five times the rf frequency. The underlying physics is explored.

DOI
10.1103/physreva.100.013420

Related papers

Spectroscopy of cesium Rydberg atoms in strong radio-frequency fields

Yuechun Jiao, Xiaoxuan Han, Zhiwei Yang +4 more

We study Rydberg atoms modulated by strong radio-frequency (rf) fields with a frequency of 70 MHz. The Rydberg atoms are prepared in a room-temperature cesium cell, and their level structure is probed using electromagnetically induced transparency (EIT). As the rf field increases from the weak- into the strong-field regime, the range of observed rf-induced phenomena progresses from ac level shifts through increasingly pronounced and numerous rf modulation sidebands to complex state mixing and level crossings with $\mathrm{high}\ensuremath{-}l$ hydrogenlike states. Weak anharmonic admixtures in the rf field generate clearly visible modifications in the Rydberg EIT spectra. A Floquet analysis is employed to model the Rydberg spectra, and good agreement with the experimental observations is found. Our results show that all-optical spectroscopy of Rydberg atoms in vapor cells can serve as an antenna-free, atom-based, and calibration-free technique to measure rf electric fields and to analyze their higher-harmonic contents.

arXiv:1601.01748•Physical Review A•Aug 17, 2016•61 citations

Radio-frequency-modulated Rydberg states in a vapor cell

Stephanie Miller, David Alexander Anderson, Georg A. Raithel

We measure strong radio-frequency (RF) electric fields using rubidium Rydberg atoms prepared in a room-temperature vapor cell as field sensors. Electromagnetically induced transparency is employed as an optical readout. We RF-modulate the and Rydberg states with 50 and 100 MHz fields, respectively. For weak to moderate RF fields, the Rydberg levels become Stark-shifted, and sidebands appear at even multiples of the driving frequency. In high fields, the adjacent hydrogenic manifold begins to intersect the shifted levels, providing rich spectroscopic structure suitable for precision field measurements. A quantitative description of strong-field level modulation and mixing of S and D states with hydrogenic states is provided by Floquet theory. Additionally, we estimate the shielding of DC electric fields in the interior of the glass vapor cell.

arXiv:1601.06840•New Journal of Physics•May 9, 2016•77 citations

Detection of 3–300 MHz electric fields using Floquet sideband gaps by “Rabi matching” dressed Rydberg atoms

Andrew P. Rotunno, Samuel Berweger, Nikunjkumar Prajapati +6 more

Radio frequencies in high-frequency (HF) and very high-frequency (VHF) bands (3–300 MHz) are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency carriers in these bands via a controlled Autler–Townes line splitting. Using a resonant 18 GHz field, the absorption signal from Townes–Merritt sidebands created by a relatively low-frequency, non-resonant field can be enhanced. Notably, this technique uses a measurement of optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant field. This technique also provides frequency-selective measurements of electric fields in the hundreds of MHz range with resolution of order 10 MHz. To show this, we demonstrate amplitude-modulated signal transduction on a MHz-range carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg “spectrum analyzer.”

arXiv:2212.03304•Journal of Applied Physics•Oct 2, 2023•19 citations

Measurements of High-Intensity Radio-Frequency Electric Fields with Rydberg Vapors

Georg A. Raithel, David Alexander Anderson

Measurements of radio-frequency (RF) electric fields in the MHz-to sub-THz range using EIT spectroscopy of Rydberg states in atomic vapors have garnered significant interest in recent years. Here we describe recent work extending the approach to measurements of coherent high-intensity RF electric fields above 1 kV/m and continuous-frequency RF measurement capability. The spectra are modeled using a non-perturbative Floquet model that accounts for higher-order interactions and state mixing. The spectroscopic data also reveal nonlinear amplifier behavior and noise.

Global Symposium on Millimeter-Waves•May 1, 2018•1 citation

Electromagnetically induced transparency spectra of cesium Rydberg atoms decorated by radio-frequency fields

Yulong Han, Bang Liu, Kan Zhang +3 more

The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.

Acta Physica Sinica•Jan 1, 2024•2 citations

Broadband Rydberg atom-based radio-frequency field sensor

Jiao Yue-Chun, Jianming Zhao, Jia Suo-Tang

Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.

Acta Physica Sinica•Jan 1, 2018•7 citations
We investigate and employ optical Rydberg resonances in an atomic vapor cell for measurements of high-intensity VHF-band radio frequency (rf) electric fields. An atomic vapor cell with integrated electrodes is used to generate high-intensity 50--500 MHz rf electric fields reaching \ensuremath∼5\ensuremath{\sim}5\ensuremath∼5 kV/m in a submillimeter gap. The fields are measured using Rydberg electromagnetically induced transparency as an optical readout of field-sensitive 30DJ30{D}_{J}30DJ​ and 35DJ35{D}_{J}35DJ​ Rydberg states of atoms within the gap. The rf electric field is determined by matching observed spectroscopic markers, including ac level shifts, even-harmonic rf sidebands, and rf-induced avoided crossings in the Rydberg manifold to calculated spectra derived from a nonperturbative Floquet theory. In our measurements, rf field frequencies and electric-field amplitudes are determined to an accuracy of 1.01.0%1.0 and 1.51.5%1.5, respectively. In the atom-field interaction, we observe a transition from a quantum regime, characterized by discrete even-harmonic Floquet states separated by an even multiple of the rf field frequency, into a semiclassical regime at very strong fields, in which the spectrum exhibits unresolved resonances whose strengths are smoothly modulated at a frequency of approximately five times the rf frequency. The underlying physics is explored.
We study Rydberg atoms modulated by strong radio-frequency (rf) fields with a frequency of 70 MHz. The Rydberg atoms are prepared in a room-temperature cesium cell, and their level structure is probed using electromagnetically induced transparency (EIT). As the rf field increases from the weak- into the strong-field regime, the range of observed rf-induced phenomena progresses from ac level shifts through increasingly pronounced and numerous rf modulation sidebands to complex state mixing and level crossings with $\mathrm{high}\ensuremath{-}l$ hydrogenlike states. Weak anharmonic admixtures in the rf field generate clearly visible modifications in the Rydberg EIT spectra. A Floquet analysis is employed to model the Rydberg spectra, and good agreement with the experimental observations is found. Our results show that all-optical spectroscopy of Rydberg atoms in vapor cells can serve as an antenna-free, atom-based, and calibration-free technique to measure rf electric fields and to analyze their higher-harmonic contents.
We measure strong radio-frequency (RF) electric fields using rubidium Rydberg atoms prepared in a room-temperature vapor cell as field sensors. Electromagnetically induced transparency is employed as an optical readout. We RF-modulate the and Rydberg states with 50 and 100 MHz fields, respectively. For weak to moderate RF fields, the Rydberg levels become Stark-shifted, and sidebands appear at even multiples of the driving frequency. In high fields, the adjacent hydrogenic manifold begins to intersect the shifted levels, providing rich spectroscopic structure suitable for precision field measurements. A quantitative description of strong-field level modulation and mixing of S and D states with hydrogenic states is provided by Floquet theory. Additionally, we estimate the shielding of DC electric fields in the interior of the glass vapor cell.
Radio frequencies in high-frequency (HF) and very high-frequency (VHF) bands (3–300 MHz) are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency carriers in these bands via a controlled Autler–Townes line splitting. Using a resonant 18 GHz field, the absorption signal from Townes–Merritt sidebands created by a relatively low-frequency, non-resonant field can be enhanced. Notably, this technique uses a measurement of optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant field. This technique also provides frequency-selective measurements of electric fields in the hundreds of MHz range with resolution of order 10 MHz. To show this, we demonstrate amplitude-modulated signal transduction on a MHz-range carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg “spectrum analyzer.”
Measurements of radio-frequency (RF) electric fields in the MHz-to sub-THz range using EIT spectroscopy of Rydberg states in atomic vapors have garnered significant interest in recent years. Here we describe recent work extending the approach to measurements of coherent high-intensity RF electric fields above 1 kV/m and continuous-frequency RF measurement capability. The spectra are modeled using a non-perturbative Floquet model that accounts for higher-order interactions and state mixing. The spectroscopic data also reveal nonlinear amplifier behavior and noise.
The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.
Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.