Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on System of Systems Engineering

Error Rate Analysis of Physical Layer Security for Sub-6 GHz 5G Network Planning

Patrick Ormond, Anil Kumar Yerrapragada, Brian Kelley

Published May 1, 2019• 3 citations
Publisher

Abstract

1, This paper investigates the application of Key-based Physical Layer Security to future 5G and IoT network dimensioning, not previously considered in other works. Results indicate a Key bit Error Rate of 1% at a cell separation of 500m with a reuse of 7. A derivation for a closed form expression of the Key bit Error Rate as a function of radio network parameters is presented for a specific Precoder Matrix Index (PMI) based Physical Layer Security scheme known as MOPRO. The equation, which accounts for Rayleigh fading environments, is verified against simulated data, and shows a gain of 6dB for 1-bit codebooks over 2-bit codebooks. Also shown is a closed form statistical expression for the probability density function of the Key bit Error Rate. The expression for direct computation of Key bit Error Rate statistics points the way forward toward future physical layer security based planning in heterogeneous networks.

DOI
10.1109/sysose.2019.8753853

Related papers

On the Application of Key-Based Physical Layer Security in 5G Heterogeneous Networks

Anil Kumar Yerrapragada, Patrick Ormond, Brian Kelley

Concern for 5G security is driving interest in additional methods capable of exchanging secure information. This paper introduces a scheme for extending 5G with Physical Layer Security, an emerging Open Systems Interconnect Layer-1 security area that achieves perfect secrecy data transmission. The foundations for a Stochastic Geometry approach to Key based Physical Layer Security are established for 5G Heterogeneous Networks. This work also introduces realistic Time Division Duplex algorithms integrated with 5G-OFDM reference signals that enable the exchange of shared, private information. The resulting Physical Layer Security protocols map random secret key bits to precoders in a codebook through a Precoder Matrix Index. Analysis is presented for Key Bit Error rates under realistic stochastic geometry frameworks in MIMO Rayleigh fading, under various base station densities, interference profiles, and configurations. A Key Bit Error Rate of 1% and 3% for both 1 and 2 bit code books is achieved with a network base station density of 0.01 km-2and 0.1 km-2respectively. The proffered Layer-1 protocols, which operate independently of existing higher layer network and transport layer security, can lead to significantly improved 5G security.

IEEE Military Communications Conference (MILCOM)•Nov 1, 2019•7 citations

Physical Layer Security for Beyond 5G: Ultra Secure Low Latency Communications

Anil Kumar Yerrapragada, Taylor Eisman, Brian Kelley

If Beyond-5G(B5G)/6G is to support critical infrastructure worldwide, there must be an effort to jointly integrate low latency and privacy into wireless protocols. This research analyzes new schemes for securing applications at low latency by extending Physical Layer Security (PLS) algorithms to B5G/6G systems. We design protocols that advance a specific form of Physical Layer Security, known as Key-based Physical Layer Security, from the theoretical realm into the practical. One form of a Key-based algorithm obscures information from eavesdroppers by mapping it to cleverly rotated reference signals. For such a scheme, prior work has found that the two-way exchange of completely private information involves six OFDM symbol times, not including synchronization. By developing a protocol that makes the most optimum use of time-frequency resources, we show that it is possible to achieve two-way private exchange and synchronization in only four symbol times - the least latency possible. A significant simulation result indicates that our improved protocol achieves sub-1 ms two-way latency, including re-transmissions. We also illustrate a protocol that shows how Key-based Physical Layer Security can privatize critical PHY layer functions such as cell search. Lastly, additional results show the performance of the PLS algorithm in terms of Key Bit Error Rates and secret key transmission rates.

IEEE Open Journal of the Communications Society•Jan 1, 2021•85 citations

Physical layer security in 5G wireless networks for data protection

Sreeram Munisankaraiah, A Arun Kumar

The fifth generation (5G) network would be a key facilitator to keeping up to the future wireless application demands such as ultra-high data rate, ultra-wide radio coverage, ultra — low latency, large number of devices connected etc. Security is a crucial issue in the 5G network as wireless transmissions have the innate quality of vulnerability towards unfriendly breach or hacks. In this paper, security issue in the 5G network, specifically the physical layer security, has been analyzed. The physical layer safeguards confidentiality of data by capitalizing on the inherent random nature of the communication medium. There are various technologies prevalent in 5G, the three most prominent ones-heterogeneous networks, massive multiple-input multiple-output, and millimeter wave have been considered and discussed. The potential areas for improvement and issues in each of the technologies have been identified and analyzed. This analysis would help in better understanding of physical layer security in the future.

International Conference on Next Generation Computing Technologies•Oct 1, 2016•10 citations

Safeguarding 5G wireless communication networks using physical layer security

Nan Yang, Lifeng Wang, Giovanni Geraci +3 more

The fifth generation (5G) network will serve as a key enabler in meeting the continuously increasing demands for future wireless applications, including an ultra-high data rate, an ultrawide radio coverage, an ultra-large number of devices, and an ultra-low latency. This article examines security, a pivotal issue in the 5G network where wireless transmissions are inherently vulnerable to security breaches. Specifically, we focus on physical layer security, which safeguards data confidentiality by exploiting the intrinsic randomness of the communications medium and reaping the benefits offered by the disruptive technologies to 5G. Among various technologies, the three most promising ones are discussed: heterogenous networks, massive multiple-input multiple-output, and millimeter wave. On the basis of the key principles of each technology, we identify the rich opportunities and the outstanding challenges that security designers must tackle. Such an identification is expected to decisively advance the understanding of future physical layer security.

IEEE Communications Magazine•Apr 1, 2015•909 citations

A PMI-Based Physical Layer Authentication and Encryption Framework for URLLC in 5G and Beyond

Abhishek Mane, Ashok K. Chikaraddi

The fifth-generation (5G) and beyond-5G networks (Ultra-Reliable Low-Latency Communication, URLLC) require end-to-end latencies of less than one milliseconds and are also ultra-high-reliability and well-secured. Traditional cryptographic authentication and key-exchange protocols are highly signaling and computationally complex and are inapplicable to latency sensitive URLLC services like autonomous driving, industrial automation, and remote healthcare. In order to overcome this barrier, a lightweight physical-layer authentication and encryption scheme of MIMO-OFDM systems is proposed in this paper which avoids the use of the security procedure of handshakes. The scheme suggested makes use of channel reciprocity in time-division duplexing (TDD) to repurpose the Precoding Matrix Indicator (PMI) as a non-permanent session-level strong key. This PMI is also projected to a unitary rotation matrix which directly encrypts the transmitted symbols at the physical-layer and generates signal energy without losing confidential information. In contrast to the current methods of physical layer security, the proposed framework takes into account the latency constraints of URLLC, allowing authentication and encryption to be achieved using a restricted amount of the number of OFDM symbols. An extensive simulation study is carried out based on a Rayleigh fading MIMO -OFDM model to illustrate that legitimate receiver obtains low bit error rates over a large SNR range, whereas passive eavesdroppers exhibit almost random decoding behavior. The findings validate that the scheme with the proposed provides strong confidentiality, minimal computations and URLLC-conformable latency to be one of the viable options of inherent security in future 5G and 6G mission-critical wireless networks.

•Aug 1, 2026•0 citations

Physical Layer Mechanism based Secure Key Exchange for 5G Networks

Bolla Sai Venu Kiran, T. Ramya

5G wireless networks are evolving to meet the rapid increase in the demand of the users to get high-quality broadband services with high-speed data rate. This advance development came up with a lot of challenges such as coverage region, security, energy efficiency, spectrum utilization, cost, latency, and data rate. To ensure the security, there are many conventional key exchange algorithms that need complex infrastructure. In recent times, physical layer-based security has gained a lot of attention since it offers the simple and efficient way of key exchange by exploiting wireless channel characteristics. In this project, for secret key sharing between the two legitimate users through the correlated channel that is shared with eavesdropper, a pre-equalization transmit filter that inverts the main channel is employed. Further to decrease the probability of interception by eavesdropper while permitting successful decoding by the legitimate user. Low-Density Parity Check (LDPC) code is used to assure reliable communication. Modulation schemes such as basic QPSK and 64,128 and 256- QAM are used to achieve higher bit rates. To achieve high secrecy between the legitimate users zero forcing algorithm is used to invert the channel. Through simulations, the effect of channel correlation will be studied to analyze the low secret key mismatch between the Bob and Eve. Here Eve having high Bit Error Rate(BER) so that eve could not obtain the original bits. The simulation will be done using Matlab.

International journal of advance research, ideas and innovations in technology•Apr 27, 2018•0 citations
1, This paper investigates the application of Key-based Physical Layer Security to future 5G and IoT network dimensioning, not previously considered in other works. Results indicate a Key bit Error Rate of 1% at a cell separation of 500m with a reuse of 7. A derivation for a closed form expression of the Key bit Error Rate as a function of radio network parameters is presented for a specific Precoder Matrix Index (PMI) based Physical Layer Security scheme known as MOPRO. The equation, which accounts for Rayleigh fading environments, is verified against simulated data, and shows a gain of 6dB for 1-bit codebooks over 2-bit codebooks. Also shown is a closed form statistical expression for the probability density function of the Key bit Error Rate. The expression for direct computation of Key bit Error Rate statistics points the way forward toward future physical layer security based planning in heterogeneous networks.
Concern for 5G security is driving interest in additional methods capable of exchanging secure information. This paper introduces a scheme for extending 5G with Physical Layer Security, an emerging Open Systems Interconnect Layer-1 security area that achieves perfect secrecy data transmission. The foundations for a Stochastic Geometry approach to Key based Physical Layer Security are established for 5G Heterogeneous Networks. This work also introduces realistic Time Division Duplex algorithms integrated with 5G-OFDM reference signals that enable the exchange of shared, private information. The resulting Physical Layer Security protocols map random secret key bits to precoders in a codebook through a Precoder Matrix Index. Analysis is presented for Key Bit Error rates under realistic stochastic geometry frameworks in MIMO Rayleigh fading, under various base station densities, interference profiles, and configurations. A Key Bit Error Rate of 1% and 3% for both 1 and 2 bit code books is achieved with a network base station density of 0.01 km-2and 0.1 km-2respectively. The proffered Layer-1 protocols, which operate independently of existing higher layer network and transport layer security, can lead to significantly improved 5G security.
If Beyond-5G(B5G)/6G is to support critical infrastructure worldwide, there must be an effort to jointly integrate low latency and privacy into wireless protocols. This research analyzes new schemes for securing applications at low latency by extending Physical Layer Security (PLS) algorithms to B5G/6G systems. We design protocols that advance a specific form of Physical Layer Security, known as Key-based Physical Layer Security, from the theoretical realm into the practical. One form of a Key-based algorithm obscures information from eavesdroppers by mapping it to cleverly rotated reference signals. For such a scheme, prior work has found that the two-way exchange of completely private information involves six OFDM symbol times, not including synchronization. By developing a protocol that makes the most optimum use of time-frequency resources, we show that it is possible to achieve two-way private exchange and synchronization in only four symbol times - the least latency possible. A significant simulation result indicates that our improved protocol achieves sub-1 ms two-way latency, including re-transmissions. We also illustrate a protocol that shows how Key-based Physical Layer Security can privatize critical PHY layer functions such as cell search. Lastly, additional results show the performance of the PLS algorithm in terms of Key Bit Error Rates and secret key transmission rates.
The fifth generation (5G) network would be a key facilitator to keeping up to the future wireless application demands such as ultra-high data rate, ultra-wide radio coverage, ultra — low latency, large number of devices connected etc. Security is a crucial issue in the 5G network as wireless transmissions have the innate quality of vulnerability towards unfriendly breach or hacks. In this paper, security issue in the 5G network, specifically the physical layer security, has been analyzed. The physical layer safeguards confidentiality of data by capitalizing on the inherent random nature of the communication medium. There are various technologies prevalent in 5G, the three most prominent ones-heterogeneous networks, massive multiple-input multiple-output, and millimeter wave have been considered and discussed. The potential areas for improvement and issues in each of the technologies have been identified and analyzed. This analysis would help in better understanding of physical layer security in the future.
The fifth generation (5G) network will serve as a key enabler in meeting the continuously increasing demands for future wireless applications, including an ultra-high data rate, an ultrawide radio coverage, an ultra-large number of devices, and an ultra-low latency. This article examines security, a pivotal issue in the 5G network where wireless transmissions are inherently vulnerable to security breaches. Specifically, we focus on physical layer security, which safeguards data confidentiality by exploiting the intrinsic randomness of the communications medium and reaping the benefits offered by the disruptive technologies to 5G. Among various technologies, the three most promising ones are discussed: heterogenous networks, massive multiple-input multiple-output, and millimeter wave. On the basis of the key principles of each technology, we identify the rich opportunities and the outstanding challenges that security designers must tackle. Such an identification is expected to decisively advance the understanding of future physical layer security.
The fifth-generation (5G) and beyond-5G networks (Ultra-Reliable Low-Latency Communication, URLLC) require end-to-end latencies of less than one milliseconds and are also ultra-high-reliability and well-secured. Traditional cryptographic authentication and key-exchange protocols are highly signaling and computationally complex and are inapplicable to latency sensitive URLLC services like autonomous driving, industrial automation, and remote healthcare. In order to overcome this barrier, a lightweight physical-layer authentication and encryption scheme of MIMO-OFDM systems is proposed in this paper which avoids the use of the security procedure of handshakes. The scheme suggested makes use of channel reciprocity in time-division duplexing (TDD) to repurpose the Precoding Matrix Indicator (PMI) as a non-permanent session-level strong key. This PMI is also projected to a unitary rotation matrix which directly encrypts the transmitted symbols at the physical-layer and generates signal energy without losing confidential information. In contrast to the current methods of physical layer security, the proposed framework takes into account the latency constraints of URLLC, allowing authentication and encryption to be achieved using a restricted amount of the number of OFDM symbols. An extensive simulation study is carried out based on a Rayleigh fading MIMO -OFDM model to illustrate that legitimate receiver obtains low bit error rates over a large SNR range, whereas passive eavesdroppers exhibit almost random decoding behavior. The findings validate that the scheme with the proposed provides strong confidentiality, minimal computations and URLLC-conformable latency to be one of the viable options of inherent security in future 5G and 6G mission-critical wireless networks.
5G wireless networks are evolving to meet the rapid increase in the demand of the users to get high-quality broadband services with high-speed data rate. This advance development came up with a lot of challenges such as coverage region, security, energy efficiency, spectrum utilization, cost, latency, and data rate. To ensure the security, there are many conventional key exchange algorithms that need complex infrastructure. In recent times, physical layer-based security has gained a lot of attention since it offers the simple and efficient way of key exchange by exploiting wireless channel characteristics. In this project, for secret key sharing between the two legitimate users through the correlated channel that is shared with eavesdropper, a pre-equalization transmit filter that inverts the main channel is employed. Further to decrease the probability of interception by eavesdropper while permitting successful decoding by the legitimate user. Low-Density Parity Check (LDPC) code is used to assure reliable communication. Modulation schemes such as basic QPSK and 64,128 and 256- QAM are used to achieve higher bit rates. To achieve high secrecy between the legitimate users zero forcing algorithm is used to invert the channel. Through simulations, the effect of channel correlation will be studied to analyze the low secret key mismatch between the Bob and Eve. Here Eve having high Bit Error Rate(BER) so that eve could not obtain the original bits. The simulation will be done using Matlab.