The differences and similarities between the detection processes involved in the microwave and visible electromagnetic (EM) waves are presented for the case of two beam superposition. A microwave receiver measures the motion of conduction electrons which responds linearly to the superposed time dependent EM field amplitudes. A visible light detector also responds to the superposition of the EM field amplitudes due to interactions with the detecting dipoles. However, the visible light detector measures the quantum of energy absorbed and responds to the square modulus of the superposition of the time dependent amplitudes of the EM fields. The measured current in the microwave detector is directly proportional to the superposed microwave amplitudes. The measured energy in visible light detector is directly proportional to the square modulus of the superposed visible light amplitudes. We will highlight the similarities and differences in the detection processes. These important similarities and difference are not underscored in most optics textbooks.
The differences and similarities between the detection processes involved in the microwave and visible electromagnetic (EM) waves are presented for the case of two beam superposition. A microwave receiver measures the motion of conduction electrons which responds linearly to the superposed time dependent EM field amplitudes. A visible light detector also responds to the superposition of the EM field amplitudes due to interactions with the detecting dipoles. However, the visible light detector measures the quantum of energy absorbed and responds to the square modulus of the superposition of the time dependent amplitudes of the EM fields. The measured current in the microwave detector is directly proportional to the superposed microwave amplitudes. The measured energy in visible light detector is directly proportional to the square modulus of the superposed visible light amplitudes. We will highlight the similarities and differences in the detection processes. These important similarities and difference are not underscored in most optics textbooks.
Comparing the radio and the light wave detection processes, this paper clarifies that what we normally call "interference" of EM waves, is actually the summation of the field induced signals carried out by the detectors. We have also presented a generalized definition of the superposition effects as measured (SEM) due to multiple physical steps behind any detection process. Thus the manipulation of the various physical properties of the detectors to various parameters of the EM waves can yield different "interference" effects for the same set of superposed waves. If EM waves interfered by themselves, such manipulation would not have been possible. We also give simple examples of visibility degradations due to rotation of the states of polarization and underscore that such degradation should not be assigned to degradation of coherence properties of the EM waves. It is due to the change in the stimulating amplitude, reduced by Malus'cosθ law, which is accessible to the uniaxial dipole like response of the detecting molecules.
This chapter discusses more carefully this wave-particle duality of light. It also introduces the theory behind measurements that count photons and some aspects of the photon detectors used in these measurements. A plane electromagnetic wave of frequency n is incident on a polarizer oriented so that it passes radiation with polarization along the x direction but absorbs radiation with the orthogonal, y polarization. Classical theory treats spontaneous emission as a smooth process, with radiation being continuously emitted more or less in all directions, according to the radiation pattern of the source. Photons are energy quanta of the electromagnetic field, carrying energy hn and linear momentum hn/c. Radiation detectors are of two basic types: There are thermal detectors, which respond to the heating of some part of the detector by incident light, and photon detectors, which measure directly the rate of absorption of photons. Controlled Vocabulary Terms classical field theory; optical detectors; photon polarisation; photons
This chapter explains the basic mathematical framework behind the emergence of the superposition effect as experienced by detectors when simultaneously stimulated by more than one EM wave by modeling the light–matter interaction process in view of the Non-Interaction of Waves property. The growing field of quantum optics does treat the atoms and molecules as quantum dipoles and EM waves mostly as classical waves. The summation of amplitudes implied by the superposition principle is actually carried out by the oscillating dipoles as their single conjoint dipolar stimulation, while constrained by their intrinsic quantum properties. The measurable superposition effects, which are always reported by detectors, are colored by their own unique response characteristics. Thus, one can generate different types of measurable superposition effects simply by changing the quantum characteristics of the detectors.
The photoelectric effect, the Compton effects, and now anticorrelation experiments have been claimed to prove that light consists of particles flying through a void. However the particle model is decisively falsified by the known wave qualities of electromagnetic radiation. Quantum Electrodynamics also uses spreading wave amplitudes; not flying particles. The evidence indicates that light is a wave and electrons are electromagnetic wave-structures that absorb and emit light in discrete wave-packets. These wave-quanta are emitted directionally and then spread in space in proportion to their wavelength. Their waves superposition with all other waves in space. In low intensity experiments, the waves that an electron in a photodetector absorbs come from the superpositioning of the source wave-quanta and background radiation. The importance of background radiation is evidenced by "dark counts". Treating electrons and the quanta they absorb and emit as particles when they are composed of waves is the source of all the paradoxes, unreality and confusion in Quantum Mechanics. The word "photon" should be replaced by "quantum" in the description of this particular electronic process. The conceptual model presented here explains the known phenomena without producing paradoxes and unifies quantum and classical electromagnetics.
In the Maxwell continuum wave theory of light, a photodetector measures the intensity of the Electro Magnetic wave. The output current of the photodetector is proportional to the intensity of input light. Since the introduction of the concept of photon, or the concept of field quantization, physicists started to premeditate single-photon detection, theoretically and experimentally. Due to slight differences in their optical paths, at certain locations, the radiations superposed constructively, at other locations the field superposed destructively. A sinusoidal modulation is thus observable. However, people found this interpretation may not be appropriate when the experimental physicists improved the sensitivity of their photodetector to the single-photon level. Almost everyone was surprised that the interference was still observable in the observation plane, and the sinusoidal modulation observed from single-photon was exactly the same as before. A single-photon counting detector is able to count photons one by one.
In the Maxwell continuum wave theory of light, a photodetector measures the intensity of the EM wave. The output current of the photodetector is proportional to the intensity of input light. Since the introduction of the concept of photon, or the concept of field quantization, physicists started to premeditate single-photon detection theoretically and experimentally. Not until the 1950s, did we have the ability to observe a single light quantum, not theoretically but experimentally. Is this ability important? In fact, it is important not only experimentally but also theoretically. As we know, for a certain period of time, we used to consider a quantum state of radiation only meaningful in terms of an ensemble. For example, in the early experiments of Young’s double-slit interferometer, the interference was judged by human eyes. Human eyes do not work well at weak light conditions. In terms of the measurement of an ensemble, the interpretation of Young’s interference is reasonable and simple: 50% of the photons passed slit-A and another 50% passed slit-B; the photons that passed slit-A “meet” with the photons that passed slit-B at different locations in the observation plane. Due to the slight differences in their optical paths, at certain locations, the radiations superposed constructively, while at other locations, the field superposed destructively. A sinusoidal modulation is thus observable. However, we found this interpretation may not be appropriate when the experimental physicists improved the sensitivity of their photodetector to the single-photon level. Almost everyone was surprised that the interference was still observable in the observation plane, and the sinusoidal modulation observed from single-photon was exactly the same as before. A single-photon counting detector is able to count photons one by one. How does a photon pass the double-slit then? Does it pass one slit or both slits? One may not care which slit a photon passes, but we do need to understand the measurement process: How does a photoelectron or a pair of photoelectrons physically relate to the quantized radiation field? Nowadays, we may easily find a statement like “… the observed photon pair is in an entangled state … ”. What does it mean?