Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Towards quantum phase slip based standard of electric current

Zhiming M. Wang, J. S. Lehtinen, K. Yu. Arutyunov

Published Jun 17, 2019• 26 citations
Publisher

Abstract

An accurate standard of electric current is a long-standing challenge of modern metrology. It has been predicted that a superconducting nanowire in the regime of quantum fluctuations can be considered as the dynamic equivalent of a chain of conventional Josephson junctions. In full analogy with the quantum standard of electric voltage based on the Josephson effect, the quantum phase slip phenomenon in ultrathin superconducting nanowires could be used for building the quantum standard of electric current. This work presents advances toward this ultimate goal.

DOI
10.1063/1.5092271

Related papers

Coherent Quantum Phase-Slips in Superconducting Nanowires in DC Transport

JC Fenton, Jonathan Burnett

The phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires was some time ago proposed to be the exact dual of the Josephson effect, a proposal accompanied by predictions of a new quantum current standard dual to the Josephson voltage standard. Unambiguous experimental observation of CQPS in nanowire structures has only recently been achieved through microwave spectroscopy which showed an avoided crossing between flux states for a superconducting ring interrupted by a superconducting nanowire. This observation raises expectations that the CQPS quantum current standard and a slew of CQPS devices dual to devices containing Josephson junction might be realised, including a tunable capacitance, a sensitive charge detector and small-signal detector. To date, experimental evidence for CQPS in a dc transport geometry has not been considered conclusive, and the impact of decoherence in CQPS devices still remains to be evaluated. We present experimental work which has enabled us to crystallise pertinent issues which have prevented the realisation of CQPS in dc transport experiments to date.

•Aug 7, 2014•0 citations

Applications in Quantum Metrology

J. Kohlmann, Alexander B Zorin

Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.

Applied Superconductivity•Jan 7, 2015•3 citations

A quantum current standard based on phase slip

C H Webster, S. P. Giblin, David Cox +2 more

We show that it is possible to fabricate a device, based on a superconducting nanowire, to demonstrate the existence of coherent quantum phase slip (QPS). If coherent QPS exists, this device will form the basis of a new type of quantum current standard capable of closing the metrological triangle.

Conference on Precision Electromagnetic Measurements•Jun 1, 2008•2 citations

Superconducting NbN Nanowires and Coherent Quantum Phase-Slips in DC Transport

J. C. Fenton, Jonathan Burnett

A quantum current standard dual to the Josephson voltage standard has been trumpeted as a primary application for the phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires, but it requires a dc transport geometry, distinct from the ring geometry in which CQPS have been probed by microwave spectroscopy measurements. We present measurements on NbN nanowires with a width of 15 nm and including integrated thin-film resistors to provide a high-impedance environment. Analysis shows that the nanowire behavior is in line with expectations. The results demonstrate that the process is promising both for future dc transport CQPS measurements and for the fabrication of other circuits in which low-width superconducting nanowires are required.

IEEE Transactions on Applied Superconductivity•Feb 19, 2016•6 citations

Probing quantum phase slips in superconducting nanowires modified using high bias voltage pulses

Thomas Aref

Quantum phase slips (QPS) or the macroscopic quantum tunneling (MQT) of a nanowire’s order parameter through an activation energy barrier have remained the subject of intense debate for many years. They are expected to occur at low enough temperature where thermally activated phase slips (TAPS) have been frozen out in analogy with Josephson junctions where the macroscopic tunneling of phase at low temperatures has been conclusively experimentally demonstrated. We address this question by following a similar experimental strategy to that employed for establishing MQT in JJs. By measuring switching current distributions, we can probe the phase slip rate and determine if it corresponds to thermal activation or quantum tunneling. Having established that the behavior we see is consistent with being in the quantum regime, we can alter properties of the nanowires and see if the response is consistent with the expectations of the quantum model. To do this we employ an in-situ modification technique using high bias voltage pulses. Using these pulses, we can change resistance, critical temperature, critical current and morphology of the nanowire. We can also change the shunting capacitance of the nanowire by altering the photolithography step used to create the nanowires electrodes. The resulting response of the nanowires agrees well with being in the quantum tunneling dominated regime. An interesting side benefit of the pulsing technique is that we can exactly set the nanowires switching current to a desired value. This may be instrumental in the development of superconducting nanowire qubits.

•Jan 1, 2010•0 citations

Spatial and temporal distribution of phase slips in Josephson junction chains

Adem Ergül, Thomas Weißl, Jan Johansson +2 more

The Josephson effect, tunnelling of a supercurrent through a thin insulator layer between two superconducting islands, is a phenomena characterized by a spatially distributed phase of the superconducting condensate. In recent years, there has been a growing focus on Josephson junction devices particularly for the applications of quantum metrology and superconducting qubits. In this study, we report the development of Josephson junction circuit formed by serially connecting many Superconducting Quantum Interference Devices, SQUIDs. We present experimental measurements as well as numerical simulations of a phase-slip center, a SQUID with weaker junctions, embedded in a Josephson junction chain. The DC transport properties of the chain are the result of phase slips which we simulate using a classical model that includes linear external damping, terminating impedance, as well as internal nonlinear quasiparticle damping. We find good agreement between the simulated and the experimental current voltage characteristics. The simulations allow us to examine the spatial and temporal distribution of phase-slip events occurring across the chains and also the existence of travelling voltage pulses which reflect at the chain edges.

Scientific Reports•Sep 7, 2017•12 citations
An accurate standard of electric current is a long-standing challenge of modern metrology. It has been predicted that a superconducting nanowire in the regime of quantum fluctuations can be considered as the dynamic equivalent of a chain of conventional Josephson junctions. In full analogy with the quantum standard of electric voltage based on the Josephson effect, the quantum phase slip phenomenon in ultrathin superconducting nanowires could be used for building the quantum standard of electric current. This work presents advances toward this ultimate goal.
The phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires was some time ago proposed to be the exact dual of the Josephson effect, a proposal accompanied by predictions of a new quantum current standard dual to the Josephson voltage standard. Unambiguous experimental observation of CQPS in nanowire structures has only recently been achieved through microwave spectroscopy which showed an avoided crossing between flux states for a superconducting ring interrupted by a superconducting nanowire. This observation raises expectations that the CQPS quantum current standard and a slew of CQPS devices dual to devices containing Josephson junction might be realised, including a tunable capacitance, a sensitive charge detector and small-signal detector. To date, experimental evidence for CQPS in a dc transport geometry has not been considered conclusive, and the impact of decoherence in CQPS devices still remains to be evaluated. We present experimental work which has enabled us to crystallise pertinent issues which have prevented the realisation of CQPS in dc transport experiments to date.
Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.
A quantum current standard dual to the Josephson voltage standard has been trumpeted as a primary application for the phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires, but it requires a dc transport geometry, distinct from the ring geometry in which CQPS have been probed by microwave spectroscopy measurements. We present measurements on NbN nanowires with a width of 15 nm and including integrated thin-film resistors to provide a high-impedance environment. Analysis shows that the nanowire behavior is in line with expectations. The results demonstrate that the process is promising both for future dc transport CQPS measurements and for the fabrication of other circuits in which low-width superconducting nanowires are required.
Quantum phase slips (QPS) or the macroscopic quantum tunneling (MQT) of a nanowire’s order parameter through an activation energy barrier have remained the subject of intense debate for many years. They are expected to occur at low enough temperature where thermally activated phase slips (TAPS) have been frozen out in analogy with Josephson junctions where the macroscopic tunneling of phase at low temperatures has been conclusively experimentally demonstrated. We address this question by following a similar experimental strategy to that employed for establishing MQT in JJs. By measuring switching current distributions, we can probe the phase slip rate and determine if it corresponds to thermal activation or quantum tunneling. Having established that the behavior we see is consistent with being in the quantum regime, we can alter properties of the nanowires and see if the response is consistent with the expectations of the quantum model. To do this we employ an in-situ modification technique using high bias voltage pulses. Using these pulses, we can change resistance, critical temperature, critical current and morphology of the nanowire. We can also change the shunting capacitance of the nanowire by altering the photolithography step used to create the nanowires electrodes. The resulting response of the nanowires agrees well with being in the quantum tunneling dominated regime. An interesting side benefit of the pulsing technique is that we can exactly set the nanowires switching current to a desired value. This may be instrumental in the development of superconducting nanowire qubits.
The Josephson effect, tunnelling of a supercurrent through a thin insulator layer between two superconducting islands, is a phenomena characterized by a spatially distributed phase of the superconducting condensate. In recent years, there has been a growing focus on Josephson junction devices particularly for the applications of quantum metrology and superconducting qubits. In this study, we report the development of Josephson junction circuit formed by serially connecting many Superconducting Quantum Interference Devices, SQUIDs. We present experimental measurements as well as numerical simulations of a phase-slip center, a SQUID with weaker junctions, embedded in a Josephson junction chain. The DC transport properties of the chain are the result of phase slips which we simulate using a classical model that includes linear external damping, terminating impedance, as well as internal nonlinear quasiparticle damping. We find good agreement between the simulated and the experimental current voltage characteristics. The simulations allow us to examine the spatial and temporal distribution of phase-slip events occurring across the chains and also the existence of travelling voltage pulses which reflect at the chain edges.