Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconducting flux qubits for high-connectivity quantum annealing without lossy dielectrics

Christopher Quintana

Published Jan 1, 2017• 2 citations
OpenAlex

Abstract

Quantum annealing can potentially be used to find better solutions to hard optimization problems faster than purely classical hardware. To take full advantage of quantum effects such as tunneling, a physical annealer should be comprised of qubits with a sufficient degree of quantum coherence. In addition, to encode useful problems, an annealer should provide a dense physical connectivity graph between qubits. Towards these goals, we develop superconducting ``fluxmon'' flux qubits suitable for high-connectivity quantum annealing without the use of performance-degrading lossy dielectrics. We carry out in-depth studies of noise and dissipation, and of qubit-qubit coupling in the strongly nonlinear regime. We perform the first frequency-resolved measurements extracting both the quantum and classical parts of the 1/f flux noise intrinsic to superconducting devices, and observe the classical-to-quantum crossover of the noise. We also identify atomic hydrogen as a magnetic dissipation source. We then implement tunable inter-qubit coupling compatible with high connectivity, and provide direct spectroscopic measurements of ultra-strong coupling between qubits. Finally, we use our system to explore quantum annealing faster than the system thermalization time, a previously unaccessed regime.

Related papers

Robust quantum optimizer with full connectivity

Simon E. Nigg, Niels Lörch, Rakesh P. Tiwari

Quantum phenomena have the potential to speed up the solution of hard optimization problems. For example, quantum annealing, based on the quantum tunneling effect, has recently been shown to scale exponentially better with system size than classical simulated annealing. However, current realizations of quantum annealers with superconducting qubits face two major challenges. First, the connectivity between the qubits is limited, excluding many optimization problems from a direct implementation. Second, decoherence degrades the success probability of the optimization. We address both of these shortcomings and propose an architecture in which the qubits are robustly encoded in continuous variable degrees of freedom. By leveraging the phenomenon of flux quantization, all-to-all connectivity with sufficient tunability to implement many relevant optimization problems is obtained without overhead. Furthermore, we demonstrate the robustness of this architecture by simulating the optimal solution of a small instance of the nondeterministic polynomial-time hard (NP-hard) and fully connected number partitioning problem in the presence of dissipation.

arXiv:1609.06282•Science Advances•Apr 7, 2017•104 citations

Decoherence of a tunable capacitively shunted flux qubit

Robbyn Trappen, Xi Dai, Muhammet Ali Yurtalan +19 more

Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence. Quantum annealers hold promise of outperforming classical computers in solving hard optimization problems, but one main challenge is understanding the role of noise in quantum annealing. Here, the authors characterize the relevant noise sources in a tunable flux qubit, a building block for quantum annealers, and provide a benchmark for future work on highly-coherent quantum annealers.

arXiv:2307.13961•Communications Physics•Nov 19, 2025•6 citations

Tunable three-body interactions between superconducting flux qubits for quantum annealing

Denis Melanson

The field of quantum information has been a fast growing field of research in the last few decades. The reason for this development is the potentially immense power of quantum computers, capable of solving hard problems in a fraction of the time it would take a classical computer. Quantum annealers are a type of quantum computer that seek to solve computational problems by finding the ground state of a quantum system. This type of quantum computer has been implemented on a large scale using superconducting flux quantum bits, but the computational power is limited. One potential improvement to help in this context is the implementation of multi-body interactions between quantum bits. Many-body interactions would be useful in allowing quantum annealers to solve more complex problems that are relevant in various areas of quantum information and science and implementing quantum error correction. \n \nWe present a superconducting device that implements a strong and tunable in sign and magnitude three-body interaction between superconducting flux quantum bits. The circuit design proposed has vanishing two-body interactions and robustness against noise and parameter variations. This circuit behaves as an ideal computational basis ZZZ coupler in a simulated three-qubit quantum annealing experiment. These properties are confirmed by calculations based on the Born-Oppenheimer approximation, a two-level spin model for the coupling circuit, and full numerical diagonalization. \n \nThe proposed circuit is based on already available technology and therefore could be readily implemented in the next generation of quantum annealing hardware. This work will be relevant for advanced quantum annealing protocols and future developments of high-order many-body interactions in quantum computers and simulators.

•Sep 3, 2019•0 citations

Superconducting qubits : survey and theoretical investigations for solid state quantum computing

Santosh Kumar Gupta

Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.

•Jan 1, 2010•0 citations

Superconducting flux qubit for quantum thermodynamics experiments

Upadhyay, Rishabh

Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.

•Jan 1, 2025•0 citations

Classical and quantum optimization of quantum processors

Tim Menke

Quantum interactions are strikingly different from their classical counterparts, and they lead to counter-intuitive effects such as quantum entanglement. The advances in quantum science and technology over the past two decades have shown that such interactions can be harnessed in quantum devices to address hard computational problems. The field of quantum computation has emerged, and superconducting circuits have become a leading platform for quantum processors. Because of the large design space and the difficulty to simulate design prototypes on a classical computer, a key challenge in quantum processor engineering is to translate desired quantum characteristics into a circuit design. A particular obstacle has been the implementation of interactions between multiple quantum bits (qubits) in one coupling mechanism. Multi-qubit interactions are necessary for a number of applications in quantum annealing, analog quantum simulation, and digital quantum computation. In this work, we develop classical and quantum computational methods to address the challenge of implementing such interactions. We present a computational method for automated design of superconducting circuits. Our method performs a parallelized, closed-loop optimization to design superconducting circuit diagrams that match predefined properties, such as dispersion features and noise sensitivities. We employ it to design a coupler for superconducting flux qubits that mediates 4-qubit interactions. The coupler circuit is then realized experimentally. We find that it has the desired ground state dispersion properties versus flux and that it does not adversely affect the lifetime of a connected flux qubit. Moreover, the coupling concept can be extended by systematically adding loops to the coupler. In a second iteration, we implement a circuit architecture in which the coupler mediates interactions between three flux qubits. The system Hamiltonian is estimated via multi-qubit pulse sequences that implement Ramsey-type interferometry between all neighboring excitation manifolds. We verify that the multi-qubit system exhibits a 3-qubit coupling that is coherently tunable, which is important for practical applications. Finally, we address the challenge that complex multi-qubit circuits are difficult to simulate accurately on a classical computer as they become larger. As a solution, we propose quantum algorithms to design and test the performance of next-generation quantum hardware on a quantum computer. We have therefore addressed the challenge of quantum device design both from a classical optimization and from a quantum computational angle.

•Jan 1, 2022•0 citations
Quantum annealing can potentially be used to find better solutions to hard optimization problems faster than purely classical hardware. To take full advantage of quantum effects such as tunneling, a physical annealer should be comprised of qubits with a sufficient degree of quantum coherence. In addition, to encode useful problems, an annealer should provide a dense physical connectivity graph between qubits. Towards these goals, we develop superconducting ``fluxmon'' flux qubits suitable for high-connectivity quantum annealing without the use of performance-degrading lossy dielectrics. We carry out in-depth studies of noise and dissipation, and of qubit-qubit coupling in the strongly nonlinear regime. We perform the first frequency-resolved measurements extracting both the quantum and classical parts of the 1/f flux noise intrinsic to superconducting devices, and observe the classical-to-quantum crossover of the noise. We also identify atomic hydrogen as a magnetic dissipation source. We then implement tunable inter-qubit coupling compatible with high connectivity, and provide direct spectroscopic measurements of ultra-strong coupling between qubits. Finally, we use our system to explore quantum annealing faster than the system thermalization time, a previously unaccessed regime.
Quantum phenomena have the potential to speed up the solution of hard optimization problems. For example, quantum annealing, based on the quantum tunneling effect, has recently been shown to scale exponentially better with system size than classical simulated annealing. However, current realizations of quantum annealers with superconducting qubits face two major challenges. First, the connectivity between the qubits is limited, excluding many optimization problems from a direct implementation. Second, decoherence degrades the success probability of the optimization. We address both of these shortcomings and propose an architecture in which the qubits are robustly encoded in continuous variable degrees of freedom. By leveraging the phenomenon of flux quantization, all-to-all connectivity with sufficient tunability to implement many relevant optimization problems is obtained without overhead. Furthermore, we demonstrate the robustness of this architecture by simulating the optimal solution of a small instance of the nondeterministic polynomial-time hard (NP-hard) and fully connected number partitioning problem in the presence of dissipation.
Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence. Quantum annealers hold promise of outperforming classical computers in solving hard optimization problems, but one main challenge is understanding the role of noise in quantum annealing. Here, the authors characterize the relevant noise sources in a tunable flux qubit, a building block for quantum annealers, and provide a benchmark for future work on highly-coherent quantum annealers.
The field of quantum information has been a fast growing field of research in the last few decades. The reason for this development is the potentially immense power of quantum computers, capable of solving hard problems in a fraction of the time it would take a classical computer. Quantum annealers are a type of quantum computer that seek to solve computational problems by finding the ground state of a quantum system. This type of quantum computer has been implemented on a large scale using superconducting flux quantum bits, but the computational power is limited. One potential improvement to help in this context is the implementation of multi-body interactions between quantum bits. Many-body interactions would be useful in allowing quantum annealers to solve more complex problems that are relevant in various areas of quantum information and science and implementing quantum error correction. \n \nWe present a superconducting device that implements a strong and tunable in sign and magnitude three-body interaction between superconducting flux quantum bits. The circuit design proposed has vanishing two-body interactions and robustness against noise and parameter variations. This circuit behaves as an ideal computational basis ZZZ coupler in a simulated three-qubit quantum annealing experiment. These properties are confirmed by calculations based on the Born-Oppenheimer approximation, a two-level spin model for the coupling circuit, and full numerical diagonalization. \n \nThe proposed circuit is based on already available technology and therefore could be readily implemented in the next generation of quantum annealing hardware. This work will be relevant for advanced quantum annealing protocols and future developments of high-order many-body interactions in quantum computers and simulators.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
Advancements in the field of cavity quantum electrodynamics (c-QED) have deepened understanding of quantum phenomena, enabled reliable Josephson junction-based devices, and facilitated their integration with other quantum technologies to explore new physics and applications. Motivated by these developments, this thesis aims to construct a testbed for studying quantum thermodynamics using a superconducting flux qubit. The flux qubit is particularly suited for thermodynamic experiments due to its strong anharmonicity and its galvanic coupling architectures that facilitate efficient energy transport. In this thesis, the on-chip components include harmonic oscillators realized as superconducting resonators, a strongly nonlinear superconducting flux qubit, two copper thermal reservoirs modelled as Johnson–Nyquist noise sources and NIS thermometers, integrated on a highly resistive silicon platform that acts as a phonon bath. These components enable the study and optimization of heat transport between the metallic reservoirs, mediated by the quantum circuit, with the flux qubit as the central, flux-tunable working substance. Heat transport through the qubit occurs via sequential excitation and relaxation cycles between its ground and excited states, where excitation extracts heat equal to the qubit’s energy gap from the hot reservoir, while relaxation releases the same energy into the cold reservoir. Enhancing the thermal device’s performance critically depends on the coupling strength between on-chip components, particularly between the qubit and resonator. This thesis commences with the investigation and demonstration of a robust qubit–resonator coupling design that achieves the ultrastrong regime experimentally. Building on this result, the developed architecture is extended to connect the qubit with two identical resonators, symmetrically positioned on the two sides. These resonators are, in turn, coupled to metallic reservoirs, enabling the first ever demonstration of flux qubit-controlled heat transport between the two reservoirs with excellent device performance. Added geometric asymmetry in the coupler, combined with the flux qubit’s strong anharmonicity, enables the successful demonstration--presented in this thesis--of a non-reciprocal device such as the Microwave Quantum Diode, which, together with the reservoirs, could potentially form an efficient thermal diode. Finally, the thesis concludes with a brief outlook on future directions and ongoing experiments that build on the flux qubit–based testbed developed here for exploring quantum thermodynamic phenomena and device applications.
Quantum interactions are strikingly different from their classical counterparts, and they lead to counter-intuitive effects such as quantum entanglement. The advances in quantum science and technology over the past two decades have shown that such interactions can be harnessed in quantum devices to address hard computational problems. The field of quantum computation has emerged, and superconducting circuits have become a leading platform for quantum processors. Because of the large design space and the difficulty to simulate design prototypes on a classical computer, a key challenge in quantum processor engineering is to translate desired quantum characteristics into a circuit design. A particular obstacle has been the implementation of interactions between multiple quantum bits (qubits) in one coupling mechanism. Multi-qubit interactions are necessary for a number of applications in quantum annealing, analog quantum simulation, and digital quantum computation. In this work, we develop classical and quantum computational methods to address the challenge of implementing such interactions. We present a computational method for automated design of superconducting circuits. Our method performs a parallelized, closed-loop optimization to design superconducting circuit diagrams that match predefined properties, such as dispersion features and noise sensitivities. We employ it to design a coupler for superconducting flux qubits that mediates 4-qubit interactions. The coupler circuit is then realized experimentally. We find that it has the desired ground state dispersion properties versus flux and that it does not adversely affect the lifetime of a connected flux qubit. Moreover, the coupling concept can be extended by systematically adding loops to the coupler. In a second iteration, we implement a circuit architecture in which the coupler mediates interactions between three flux qubits. The system Hamiltonian is estimated via multi-qubit pulse sequences that implement Ramsey-type interferometry between all neighboring excitation manifolds. We verify that the multi-qubit system exhibits a 3-qubit coupling that is coherently tunable, which is important for practical applications. Finally, we address the challenge that complex multi-qubit circuits are difficult to simulate accurately on a classical computer as they become larger. As a solution, we propose quantum algorithms to design and test the performance of next-generation quantum hardware on a quantum computer. We have therefore addressed the challenge of quantum device design both from a classical optimization and from a quantum computational angle.