Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Demonstration of anti-Stokes cooling in Yb-doped ZBLAN fibers at atmospheric pressure

Jennifer M. Knall, Arushi Arora, Martin Bernier, Solenn Cozic, Michel J. F. Digonnet

Published Apr 25, 2019• 22 citations
Publisher

Abstract

For the first time, to the best of our knowledge, optical cooling is demonstrated in a fiber at atmospheric pressure. Using a specialized slow-light fiber Bragg grating temperature sensor, −5.2 mK and −0.65 K were measured in a single-mode (1% YbF3) and multimode (3% YbF3) ZBLAN fiber with respective cooling efficiencies of 2.2% and 0.90%. Fitting a recently reported quantitative model of optical cooling in fibers to the measured temperature change dependence on the pump power per unit length validates the model and allows us to infer the fibers’ absorptive loss and quenching lifetime, key parameters that are scarce in literature. These values are necessary for accurate cooling predictions and will aid in the development of fibers for application in optical coolers and radiation-balanced lasers.

DOI
10.1364/ol.44.002338

Related papers

Experimental demonstration of a cooled silica fiber amplifier

Jennifer M. Knall, Magnus Engholm, Tommy Boilard +2 more

We will report the first demonstration of an optically cooled fiber amplifier. The fiber was made of silica, had a core doped with Yb, and was core-pumped to achieve both gain and cooling in the core via anti-Stokes fluorescence. Gains larger than 10 dB were measured while maintaining a negative average temperature change along the fiber.

Photonic Heat Engines: Science and Applications•Mar 4, 2021•5 citations

Improved Closed-Loop Slow-Light Temperature Sensor With Millidegree Resolution for Laser Cooling

Enkeleda Balliu, Lauris Talbot, Chun‐Wei Chen +7 more

For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.

International Conference on Optical Fiber Sensors (OFS)•Jan 1, 2023•4 citations

Laser cooling under ambient conditions in Yb3+:KYW

Laura B. Andre, Long Cheng, Alexander J. Salkeld +4 more

We report the first observation of laser cooling in 1%Yb3+:KYW and discuss factors that limit the cooling efficiency. Cooling by 10 K from room temperature at atmospheric pressure was achieved in this crystal at a wavelength of 1025 nm using 8 W from a seeded fiber amplifier. The temperature of the sample was measured using a calibrated differential luminescence thermometry method and was verified with a thermal camera. Infrared imagery and 3-D modeling were used to analyze the impact of thermal conduction, thermal convection, black-body radiation, and background impurities. The simulated results agree with experimental measurements confirming that the chief limitation of laser cooling at room temperature and atmospheric pressure is thermal conduction from sample supports. Best results were obtained for samples mounted on silica aerogel. Theoretical improvement of cooling efficiency in vacuum by exploiting impurity absorption saturation is also discussed.

Photonic Heat Engines: Science and Applications•Mar 1, 2019•0 citations

Laser Cooling of a Solid by 16 K Starting from Room Temperature

Carl E. Mungan, M. I. Buchwald, B. C. Edwards +2 more

An ${\mathrm{Yb}}^{3+}$-doped optical fiber is laser cooled in vacuo from 298 to 282 K. Cooling results from anti-Stokes fluorescence of the ytterbium ions after optical pumping at a wavelength of 1015 nm. The sample temperature is deduced from the emission spectrum, which is sensitive to the populations in the excited-state multiplet of the ions. The temperature change is limited by the coupling between the fiber and ambient blackbody radiation, as confirmed when samples suddenly exposed to the pump laser are found to exponentially relax towards thermal steady state with the expected time constants.

Physical Review Letters•Feb 10, 1997•144 citations

Spectroscopic and laser cooling results on Yb3+-doped BaY2F8 single crystal

Stefano Bigotta, Daniela Parisi, Lucia Bonelli +3 more

Anti-Stokes cooling has been observed in an Yb3+-doped BaY2F8 single crystal. Single crystals have been grown by the Czochralski technique. The absorption spectra and the emission properties have been measured at room temperature and at 10K. The energy positions of the Stark sublevels of the ground and the excited state manifolds have been determined and separated from the vibronic substructure. The intrinsic decay time of the F5∕22 level has been measured taking care of avoiding the effect of multiple reabsorption processes. The theoretical and experimental cooling efficiencies of Yb:BaY2F8 are evaluated and compared with respect to those of the most frequently investigated materials for laser cooling. A temperature drop of almost 4K was measured by pumping the crystal with 3W of laser radiation at ∼1025nm in single pass configuration with a cooling efficiency of ∼3%.

Journal of Applied Physics•Jul 1, 2006•48 citations

Loss-compensated slow-light fiber Bragg grating with 22-km/s group velocity

Pierre-Baptiste Vigneron, Tommy Boilard, Enkeleda Balliu +3 more

This Letter reports the behavior of the slow-light resonances of a strong apodized fiber Bragg grating (FBG) in which the intrinsic loss is compensated for by a small internal gain. The 6.5-mm FBG, written with a femtosecond laser in an Er-doped single-mode fiber, was pumped at ∼ 1475 n m just below the lasing threshold to offset most of its intrinsic loss, thereby narrowing its resonances. The fundamental slow-light resonance was measured to have a linewidth of 8.5 fm, or a record group velocity of ∼ 22 k m / s , and a peak transmission near unity ( − 0.2 d B ). The measured dependencies of the linewidth and peak transmission on pump power agree well with a new model that predicts the transmission spectrum of loss-compensated FBGs in the presence of pump and signal saturation.

Optics Letters•May 7, 2020•8 citations
For the first time, to the best of our knowledge, optical cooling is demonstrated in a fiber at atmospheric pressure. Using a specialized slow-light fiber Bragg grating temperature sensor, −5.2 mK and −0.65 K were measured in a single-mode (1% YbF3) and multimode (3% YbF3) ZBLAN fiber with respective cooling efficiencies of 2.2% and 0.90%. Fitting a recently reported quantitative model of optical cooling in fibers to the measured temperature change dependence on the pump power per unit length validates the model and allows us to infer the fibers’ absorptive loss and quenching lifetime, key parameters that are scarce in literature. These values are necessary for accurate cooling predictions and will aid in the development of fibers for application in optical coolers and radiation-balanced lasers.
For applications such as laser cooling of doped fibers, where it is critical to measure accurately the temperature of a cooled fiber that is very close to room temperature, it is paramount to develop a reliable, very short (mm) fiber temperature sensor with millikelvin resolution and very little drift. We report a second generation of a unique slow-light fiber Bragg grating (FBG) temperature sensor that meets these stringent requirements. Experiments and modeling establish that its temperature response depends only on well-known material constants of the silica FBG and the response of the probe laser’s wavelength controller. The response is independent of the linewidth of the slow-light resonance, hence different FBGs and/or resonances have the exact same response. Examples of measured cooling in optically pumped Yb-doped fibers show that more reliable thermal contact with the cooled fiber is obtained by wrapping the FBG and the cooled fiber.
We report the first observation of laser cooling in 1%Yb3+:KYW and discuss factors that limit the cooling efficiency. Cooling by 10 K from room temperature at atmospheric pressure was achieved in this crystal at a wavelength of 1025 nm using 8 W from a seeded fiber amplifier. The temperature of the sample was measured using a calibrated differential luminescence thermometry method and was verified with a thermal camera. Infrared imagery and 3-D modeling were used to analyze the impact of thermal conduction, thermal convection, black-body radiation, and background impurities. The simulated results agree with experimental measurements confirming that the chief limitation of laser cooling at room temperature and atmospheric pressure is thermal conduction from sample supports. Best results were obtained for samples mounted on silica aerogel. Theoretical improvement of cooling efficiency in vacuum by exploiting impurity absorption saturation is also discussed.
An Yb3+{\mathrm{Yb}}^{3+}Yb3+-doped optical fiber is laser cooled in vacuo from 298 to 282 K. Cooling results from anti-Stokes fluorescence of the ytterbium ions after optical pumping at a wavelength of 1015 nm. The sample temperature is deduced from the emission spectrum, which is sensitive to the populations in the excited-state multiplet of the ions. The temperature change is limited by the coupling between the fiber and ambient blackbody radiation, as confirmed when samples suddenly exposed to the pump laser are found to exponentially relax towards thermal steady state with the expected time constants.
Anti-Stokes cooling has been observed in an Yb3+-doped BaY2F8 single crystal. Single crystals have been grown by the Czochralski technique. The absorption spectra and the emission properties have been measured at room temperature and at 10K. The energy positions of the Stark sublevels of the ground and the excited state manifolds have been determined and separated from the vibronic substructure. The intrinsic decay time of the F5∕22 level has been measured taking care of avoiding the effect of multiple reabsorption processes. The theoretical and experimental cooling efficiencies of Yb:BaY2F8 are evaluated and compared with respect to those of the most frequently investigated materials for laser cooling. A temperature drop of almost 4K was measured by pumping the crystal with 3W of laser radiation at ∼1025nm in single pass configuration with a cooling efficiency of ∼3%.
This Letter reports the behavior of the slow-light resonances of a strong apodized fiber Bragg grating (FBG) in which the intrinsic loss is compensated for by a small internal gain. The 6.5-mm FBG, written with a femtosecond laser in an Er-doped single-mode fiber, was pumped at ∼ 1475 n m just below the lasing threshold to offset most of its intrinsic loss, thereby narrowing its resonances. The fundamental slow-light resonance was measured to have a linewidth of 8.5 fm, or a record group velocity of ∼ 22 k m / s , and a peak transmission near unity ( − 0.2 d B ). The measured dependencies of the linewidth and peak transmission on pump power agree well with a new model that predicts the transmission spectrum of loss-compensated FBGs in the presence of pump and signal saturation.