Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Reconfigurable SQUID Arrays

Sichao Yu, William Mayer, Matthieu Dartiailh, Kaushini S. Wickramasinghe, Joseph O’Connell Yuan, Javad Shabani

Published Mar 6, 2019• 0 citations
OpenAlex

Related papers

Characteristics of Flux Noise in Long Superconducting Quantum Interference Device Array

T. Morooka, Hiroaki Myoren, S. Takada +1 more

The flux noise in a long superconducting quantum interference device (SQUID) array consisting of at least 100 dc-SQUID elements connected in series was characterized analytically, and then compared with measurements. In the analysis, noise sources in the array were shunt resistors for Josephson junctions, a damping resistor for a SQUID loop, the dynamic resistance of the SQUID array, and the noise of electronics at room temperature. The flux noise of the array was calculated analytically as a function of the number of dc-SQUID elements. The results reveal that the flux noise is significantly influenced by the dynamic resistance of the array, although the influence by the dynamic resistance for a single SQUID is negligibly small. The dynamic resistance becomes dominant for the flux noise when the number of SQUID elements in the array exceeds 100. These results agree well with the measured flux noise for a long SQUID array constructed using a Nb/AlO x /Nb fabrication process.

Japanese Journal of Applied Physics•Nov 10, 2003•3 citations

Low noise SQUIDS

V. J. de Waal

•Sep 13, 1983•1 citation

A new regime of rf-SQUID

I. M. Dmitrenko, V. I. Shnyrkov, Georgy M. Tsoi +1 more

Physica B+C•Aug 1, 1981•0 citations

Linearized superconducting quantum interference device array for high bandwidth frequency-domain readout multiplexing

Trevor M. Lanting, M. Dobbs, H. Spieler +2 more

We have designed and demonstrated a superconducting quantum interference device (SQUID) array linearized with cryogenic feedback. To achieve the necessary loop gain, a 300-element series array SQUID is constructed from three monolithic 100-element series arrays. A feedback resistor completes the loop from the SQUID output to the input coil. The short feedback path of this linearized SQUID array (LISA) allows for a substantially larger flux-locked loop bandwidth as compared to a SQUID flux-locked loop that includes a room temperature amplifier. The bandwidth, linearity, noise performance, and 3 Phi(0) dynamic range of the LISA are sufficient for its use in our target application: the multiplexed readout of transition-edge sensor bolometers.

arXiv:0901.1919•Review of Scientific Instruments•Sep 1, 2009•7 citations

Fabrication and Characteristics of All-NbN SQUID Series Array

Qiyu Zhang, Huiwu Wang, Xin Tang +2 more

In this article, an all-NbN superconducting quantum interference device (SQUID) array was developed for future applications by taking advantage of the higher critical temperature of a NbN film compared with Nb. The NbN SQUID array was composed of 100 SQUIDs with equal loop areas connected in series. The array was fabricated on a single-crystal MgO (100) substrate using 3-μm-diameter NbN/AlN/NbN Josephson junctions. The hysteresis and shielding parameters of the SQUID were 0.67 and 0.15, respectively. The SQUIDs in the array were coherently modulated by injecting current in a common flux control line, which resulted in a modulation voltage of 3.54 mV with consistent periodicity and a flux-to-voltage transfer coefficient of 23 mV/Φ0. Using a flux locked loop circuit, the fabricated NbN SQUID array exhibited excellent performance with a low white flux noise of 1.4 μΦ0/√Hz, which included the preamplifier noise.

IEEE Transactions on Applied Superconductivity•Aug 30, 2019•8 citations

Fundamental Limits on Squid Technology

John L. Clarke

Springer eBooks•Jan 1, 1983•10 citations
The flux noise in a long superconducting quantum interference device (SQUID) array consisting of at least 100 dc-SQUID elements connected in series was characterized analytically, and then compared with measurements. In the analysis, noise sources in the array were shunt resistors for Josephson junctions, a damping resistor for a SQUID loop, the dynamic resistance of the SQUID array, and the noise of electronics at room temperature. The flux noise of the array was calculated analytically as a function of the number of dc-SQUID elements. The results reveal that the flux noise is significantly influenced by the dynamic resistance of the array, although the influence by the dynamic resistance for a single SQUID is negligibly small. The dynamic resistance becomes dominant for the flux noise when the number of SQUID elements in the array exceeds 100. These results agree well with the measured flux noise for a long SQUID array constructed using a Nb/AlO x /Nb fabrication process.
We have designed and demonstrated a superconducting quantum interference device (SQUID) array linearized with cryogenic feedback. To achieve the necessary loop gain, a 300-element series array SQUID is constructed from three monolithic 100-element series arrays. A feedback resistor completes the loop from the SQUID output to the input coil. The short feedback path of this linearized SQUID array (LISA) allows for a substantially larger flux-locked loop bandwidth as compared to a SQUID flux-locked loop that includes a room temperature amplifier. The bandwidth, linearity, noise performance, and 3 Phi(0) dynamic range of the LISA are sufficient for its use in our target application: the multiplexed readout of transition-edge sensor bolometers.
In this article, an all-NbN superconducting quantum interference device (SQUID) array was developed for future applications by taking advantage of the higher critical temperature of a NbN film compared with Nb. The NbN SQUID array was composed of 100 SQUIDs with equal loop areas connected in series. The array was fabricated on a single-crystal MgO (100) substrate using 3-μm-diameter NbN/AlN/NbN Josephson junctions. The hysteresis and shielding parameters of the SQUID were 0.67 and 0.15, respectively. The SQUIDs in the array were coherently modulated by injecting current in a common flux control line, which resulted in a modulation voltage of 3.54 mV with consistent periodicity and a flux-to-voltage transfer coefficient of 23 mV/Φ0. Using a flux locked loop circuit, the fabricated NbN SQUID array exhibited excellent performance with a low white flux noise of 1.4 μΦ0/√Hz, which included the preamplifier noise.