Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Controlled Bose-condensed sources for atom interferometry

Stuart S. Szigeti

Published Jan 1, 2013• 6 citations
Publisher

Abstract

This thesis contributes to the debate over the viability of using Bose-condensed sources to improve the sensitivity of atom interferometers. Specifically, we present theoretical investigations into (1) the effect of source momentum width on large momentum transfer (LMT) atom interferometry with Bragg pulses, and (2) the prospect of stabilising a high flux, narrow linewidth, continuously pumped atom laser via measurement-based feedback control of the BEC that forms the lasing mode of the atom laser. To begin, this thesis considers the effect of the atomic source's momentum width on the phase sensitivity of Bragg pulse atom interferometers in the Mach-Zehnder configuration. We show that an atomic cloud's momentum width places a fundamental upper bound on the maximum transfer efficiency of a Bragg mirror pulse, and furthermore limits the phase sensitivity of a Bragg pulse atom interferometer. We quantify these momentum width effects and precisely compute how mirror efficiencies and interferometer phase sensitivities vary as functions of Bragg order and source type. In particular, we show that narrow momentum width Bose-condensed sources give comparable sensitivities to broad momentum width thermal sources, even after incorporating the lower atom flux of Bose-condensed sources. Coupled with other favourable properties of Bose-condensed sources, such as their high tolerance to classical noise due to optical wavefront aberrations and the Coriolis effect, this suggests that LMT Bragg atom interferometry with Bose-condensed sources should yield improved sensitivities over current inertial sensors. Furthermore, our results and methodology allow for the efficient optimisation of Bragg pulses, which will help in the design of LMT Bragg mirrors and beamsplitters for atom-interferometer-based inertial sensors, irrespective of source type. In the second part of this thesis, we investigate the prospect of measurement-based feedback control of a BEC, with the aim of reducing density fluctuations by cooling the condensate to a stable spatial mode. Firstly, we consider the effects of experimental imperfections on the estimation-based feedback control of a weakly-interacting BEC undergoing continuous position measurement. These limitations violate the assumption that the estimator (i.e., filter) accurately models the underlying system, thus requiring a separate analysis of the system and filter dynamics. We show that the control scheme is robust to detector inefficiency, time delay, technical noise and miscalibrated parameters. These results imply that reasonable experimental imperfections do not limit the feasibility of cooling a BEC by continuous measurement and feedback. Secondly, we designed a feedback-control scheme for a trapped condensate, with interatomic interactions of any strength, based on a phase-contrast imaging setup. We derive the filtering equation for the system, and show that it gives a continuous measurement of the condensate's density. A semiclassical analysis of this control scheme shows that feedback-cooling of an interacting BEC is also possible, and that the interatomic interactions actually increase the effectiveness of the control. Therefore, measurement-based feedback control can stabilise the spatial mode of a BEC, which is a requirement for the high flux, narrow linewidth, continuously pumped atom laser sources that could potentially give inertial measurement sensitivities orders of magnitude beyond current state-of-the-art devices.

DOI
10.25911/5d514a57ce679

Related papers

Why momentum width matters for atom interferometry with Bragg pulses

Stuart S. Szigeti, J. E. Debs, J. J. Hope +2 more

We theoretically consider the effect of the atomic source's momentum width on the efficiency of Bragg mirrors and beamsplitters and, more generally, on the phase sensitivity of Bragg pulse atom interferometers. By numerical optimization, we show that an atomic cloud's momentum width places a fundamental upper bound on the maximum transfer efficiency of a Bragg mirror pulse, and furthermore limits the phase sensitivity of a Bragg pulse atom interferometer. We quantify these momentum width effects, and precisely compute how mirror efficiencies and interferometer phase sensitivities vary as functions of Bragg order and source type. Our results and methodology allow for an efficient optimization of Bragg pulses and the comparison of different atomic sources, and will help in the design of large momentum transfer Bragg mirrors and beamsplitters for use in atom-based inertial sensors.

arXiv:1110.2901•New Journal of Physics•Feb 3, 2012•152 citations

Interferometry and precision measurements with Bose-condensed atoms

D. Döring

Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.

•Jan 1, 2011•0 citations

Cold atom interferometry in optical potentials

Gordon McDonald

This thesis describes recent experiments conducted on a Bose-Einstein condensate in an optical waveguide. This optical potential confines the atoms against gravity in the vertical dimension, guiding them to freely propagate in the horizontal. Being supported against gravity enables long expansion times of hundreds of milliseconds, facilitating techniques such as delta-kick cooling. In an ideal atom interferometer, the beamsplitters would impart a large momentum splitting between the interfering states in order to increase the signal. However, their effective use requires both an even narrower momentum width source and good vibration isolation. Three such techniques were investigated in this thesis: reflection from a repulsive light potential barrier, Bragg transitions from an optical lattice (which are effectively bouncing atoms off a moving grating), and Bloch-acceleration by loading the atoms into such an optical lattice and then accelerating the combined system. It is found that a combination of both Bragg and Bloch provides the most promising route to truly large momentum transfer in a system which is sensitive only to acceleration. Lastly, large-momentum transfer techniques can be used to effectively increase the way in which the output signal scales with time, creating interferometers which generate the same sensitivity faster (increasing the bandwidth of a sensor), or generate a much better sensitivity in the same time. We form a dual condensate of both rubidium-85 an rubidium-87 via sympathetic cooling. The collisional properties of Rubidium-85 can be modified by applying an external magnetic field, at an easy-to-experimentally-reach value of between 150-170G. It turns out that this combination of atomic isotopes is ideal for an interferometric test of the weak equivalence principle, one of the underpinnings of General Relativity. This thesis also presents the results of the first Bose-condensed version of such a dual-species interferometer. By removing any 87Rb left after condensation, we have created a pure 85Rb BEC. Using this we can now explore how the inter-atomic interactions affect the phase shift of a condensed atom interferometer, as we have complete control over the interaction strength. A condensate with no inter-particle interactions should behave like an ideal particle. With a small attractive interaction between atoms, it is possible to create a self-trapped cloud of atoms which propagates dispersionlessly. This cloud is known as a soliton, and it is predicted to have even more interesting quantum mechanical properties. For example it is predicted that by colliding two such solitons, an entangled state can be generated. Our results indicate that the dispersionless character of the soliton out-performs all other interaction strengths in an atom interferometer, including even the non-interacting cloud.

•Jan 1, 2015•0 citations

Why MomentumWidth Matters for Atom Interferometry

Stuart S. Szigeti, J. E. Debs, J. J. Hope +6 more

In this paper, we theoretically investigate how the momentum width of an atomic source affects the efficiency of Bragg beam splitters and mirrors. We conclude that narrow momentum width sources, such as atom lasers, are significantly more efficient than atomic clouds with a larger momentum width, such as thermal sources, for high (but accessible) order Bragg processes. The development of large momentum transfer (LMT) mirrors and beam splitters is one of the most promising paths leading to increased precision in future sensors based on atom interferometry. This makes these results significant, because the signal to noise ratio of an interferometric measurement scales linearly with the momentum imparted in the beam splitting processes and scales as the square root of the atomic flux.

Optics InfoBase Conference Papers•Aug 28, 2011•0 citations

Robust atom optics for Bragg atom interferometry

Garrett Louie, Zilin Chen, Tejas Deshpande +1 more

Abstract Multi-photon Bragg diffraction is a powerful method for fast, coherent momentum transfer of atom waves. However, laser noise, Doppler detunings, and cloud expansion limit its efficiency in large momentum transfer (LMT) pulse sequences. We present simulation studies of robust Bragg pulses developed through numerical quantum optimal control. Optimized pulse performance under noise and cloud inhomogeneities is analyzed and compared to analogous Gaussian and adiabatic rapid passage pulses in simulated LMT Mach–Zehnder interferometry sequences. The optimized pulses maintain robust population transfer and phase response over a broader range of noise, resulting in superior contrast in LMT sequences with thermal atom clouds and intensity inhomogeneities. Large optimized LMT sequences use lower pulse area than Gaussian pulses, making them less susceptible to spontaneous emission loss. The optimized sequences maintain over five times better contrast with tens of ℏ k momentum separation and offer more improvement with greater LMT. Such pulses could allow operation of Bragg atom interferometers with unprecedented sensitivity, improved contrast, and hotter atom sources.

arXiv:2303.16950•New Journal of Physics•Jul 27, 2023•24 citations

The role of interactions in atom interferometry with Bose-Condensed atoms

P. A. Altin

In recent years, atom interferometry has become established as an indispensable tool in both fundamental and applied physics. With present state-of-the-art devices based on thermal atoms reaching limits imposed by the momentum spread of the initial atomic wavepacket, it seems natural to ask whether colder sources such as Bose-Einstein condensates may prove beneficial in advancing the precision of interferometric measurements. The thesis at hand aims to inform this question, specifically by examining the role played by atomic interactions in interferometers based on Bose-condensed atoms. Interactions can have both advantageous and deleterious consequences in the context of atom interferometry. They provide a means to control the momentum width of the condensate, and facilitate the generation of nonclassical squeezed states which may enhance the phase sensitivity beyond the shot noise limit. Conversely, the condensate self-interaction causes mean-field shifts, multimode excitations and phase diffusion which can erode both the precision and the accuracy of an interferometric measurement. The question of when and in which systems the detrimental effects of interactions outweigh the advantages of using Bose-Einstein condensates is an important one, and warrants investigation. This thesis presents experimental studies into the role of interactions in both internal- and external-state atom interferometers. As a foundation for these investigations, we describe the design and construction of an apparatus for creating Bose-Einstein condensates of the two stable rubidium isotopes in an optical trap. By sympathetic cooling with a rubidium-87 reservoir, we are able to produce condensates of rubidium-85 in which the interactions may be adjusted by means of a magnetic Feshbach resonance. The tunability afforded by the Feshbach resonance is used to study inelastic losses in ultracold rubidium-85 clouds, as well as the effect of interactions on condensate stability and on the ground state of dual-species mixtures. In particular, we offer new experimental data on the dynamics of collapsing condensates with attractive interactions, over which some controversy has existed since the first experiments more than a decade ago. Good agreement is found between the measured collapse times and a simple mean-field model. Proceeding to interferometry, we present results from Ramsey interferometers operating on the clock transition of rubidium-87 Bose-Einstein condensates. In free-space operation with Raman beamsplitters, we demonstrate projection-noise-limited performance, an important prerequisite for the realisation of squeezing-enhanced sensitivity. Using large condensates of up to 10⁶ atoms and microwave coupling, we study the effect of interactions on the Ramsey fringe contrast. The dominant source of decoherence is found to be spatial dynamics driven by the difference in interparticle interaction strengths, which are analysed using the spin-echo technique and numerical simulations of the Gross-Pitaevskii equation. Finally, we turn our attention to external-state interferometry, implementing a Mach-Zehnder gravimeter using Bragg transitions in a freely falling rubidium-87 condensate. Large-momentum-transfer beamsplitters composed of higher-order Bragg diffraction and Bloch oscillations are used to increase the accumulated phase and thus the sensitivity of the interferometer. The role of interactions in this system is examined, and we canvass methods for achieving further increases in sensitivity.

•Jan 1, 2012•4 citations
This thesis contributes to the debate over the viability of using Bose-condensed sources to improve the sensitivity of atom interferometers. Specifically, we present theoretical investigations into (1) the effect of source momentum width on large momentum transfer (LMT) atom interferometry with Bragg pulses, and (2) the prospect of stabilising a high flux, narrow linewidth, continuously pumped atom laser via measurement-based feedback control of the BEC that forms the lasing mode of the atom laser. To begin, this thesis considers the effect of the atomic source's momentum width on the phase sensitivity of Bragg pulse atom interferometers in the Mach-Zehnder configuration. We show that an atomic cloud's momentum width places a fundamental upper bound on the maximum transfer efficiency of a Bragg mirror pulse, and furthermore limits the phase sensitivity of a Bragg pulse atom interferometer. We quantify these momentum width effects and precisely compute how mirror efficiencies and interferometer phase sensitivities vary as functions of Bragg order and source type. In particular, we show that narrow momentum width Bose-condensed sources give comparable sensitivities to broad momentum width thermal sources, even after incorporating the lower atom flux of Bose-condensed sources. Coupled with other favourable properties of Bose-condensed sources, such as their high tolerance to classical noise due to optical wavefront aberrations and the Coriolis effect, this suggests that LMT Bragg atom interferometry with Bose-condensed sources should yield improved sensitivities over current inertial sensors. Furthermore, our results and methodology allow for the efficient optimisation of Bragg pulses, which will help in the design of LMT Bragg mirrors and beamsplitters for atom-interferometer-based inertial sensors, irrespective of source type. In the second part of this thesis, we investigate the prospect of measurement-based feedback control of a BEC, with the aim of reducing density fluctuations by cooling the condensate to a stable spatial mode. Firstly, we consider the effects of experimental imperfections on the estimation-based feedback control of a weakly-interacting BEC undergoing continuous position measurement. These limitations violate the assumption that the estimator (i.e., filter) accurately models the underlying system, thus requiring a separate analysis of the system and filter dynamics. We show that the control scheme is robust to detector inefficiency, time delay, technical noise and miscalibrated parameters. These results imply that reasonable experimental imperfections do not limit the feasibility of cooling a BEC by continuous measurement and feedback. Secondly, we designed a feedback-control scheme for a trapped condensate, with interatomic interactions of any strength, based on a phase-contrast imaging setup. We derive the filtering equation for the system, and show that it gives a continuous measurement of the condensate's density. A semiclassical analysis of this control scheme shows that feedback-cooling of an interacting BEC is also possible, and that the interatomic interactions actually increase the effectiveness of the control. Therefore, measurement-based feedback control can stabilise the spatial mode of a BEC, which is a requirement for the high flux, narrow linewidth, continuously pumped atom laser sources that could potentially give inertial measurement sensitivities orders of magnitude beyond current state-of-the-art devices.
We theoretically consider the effect of the atomic source's momentum width on the efficiency of Bragg mirrors and beamsplitters and, more generally, on the phase sensitivity of Bragg pulse atom interferometers. By numerical optimization, we show that an atomic cloud's momentum width places a fundamental upper bound on the maximum transfer efficiency of a Bragg mirror pulse, and furthermore limits the phase sensitivity of a Bragg pulse atom interferometer. We quantify these momentum width effects, and precisely compute how mirror efficiencies and interferometer phase sensitivities vary as functions of Bragg order and source type. Our results and methodology allow for an efficient optimization of Bragg pulses and the comparison of different atomic sources, and will help in the design of large momentum transfer Bragg mirrors and beamsplitters for use in atom-based inertial sensors.
Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.
This thesis describes recent experiments conducted on a Bose-Einstein condensate in an optical waveguide. This optical potential confines the atoms against gravity in the vertical dimension, guiding them to freely propagate in the horizontal. Being supported against gravity enables long expansion times of hundreds of milliseconds, facilitating techniques such as delta-kick cooling. In an ideal atom interferometer, the beamsplitters would impart a large momentum splitting between the interfering states in order to increase the signal. However, their effective use requires both an even narrower momentum width source and good vibration isolation. Three such techniques were investigated in this thesis: reflection from a repulsive light potential barrier, Bragg transitions from an optical lattice (which are effectively bouncing atoms off a moving grating), and Bloch-acceleration by loading the atoms into such an optical lattice and then accelerating the combined system. It is found that a combination of both Bragg and Bloch provides the most promising route to truly large momentum transfer in a system which is sensitive only to acceleration. Lastly, large-momentum transfer techniques can be used to effectively increase the way in which the output signal scales with time, creating interferometers which generate the same sensitivity faster (increasing the bandwidth of a sensor), or generate a much better sensitivity in the same time. We form a dual condensate of both rubidium-85 an rubidium-87 via sympathetic cooling. The collisional properties of Rubidium-85 can be modified by applying an external magnetic field, at an easy-to-experimentally-reach value of between 150-170G. It turns out that this combination of atomic isotopes is ideal for an interferometric test of the weak equivalence principle, one of the underpinnings of General Relativity. This thesis also presents the results of the first Bose-condensed version of such a dual-species interferometer. By removing any 87Rb left after condensation, we have created a pure 85Rb BEC. Using this we can now explore how the inter-atomic interactions affect the phase shift of a condensed atom interferometer, as we have complete control over the interaction strength. A condensate with no inter-particle interactions should behave like an ideal particle. With a small attractive interaction between atoms, it is possible to create a self-trapped cloud of atoms which propagates dispersionlessly. This cloud is known as a soliton, and it is predicted to have even more interesting quantum mechanical properties. For example it is predicted that by colliding two such solitons, an entangled state can be generated. Our results indicate that the dispersionless character of the soliton out-performs all other interaction strengths in an atom interferometer, including even the non-interacting cloud.
In this paper, we theoretically investigate how the momentum width of an atomic source affects the efficiency of Bragg beam splitters and mirrors. We conclude that narrow momentum width sources, such as atom lasers, are significantly more efficient than atomic clouds with a larger momentum width, such as thermal sources, for high (but accessible) order Bragg processes. The development of large momentum transfer (LMT) mirrors and beam splitters is one of the most promising paths leading to increased precision in future sensors based on atom interferometry. This makes these results significant, because the signal to noise ratio of an interferometric measurement scales linearly with the momentum imparted in the beam splitting processes and scales as the square root of the atomic flux.
Abstract Multi-photon Bragg diffraction is a powerful method for fast, coherent momentum transfer of atom waves. However, laser noise, Doppler detunings, and cloud expansion limit its efficiency in large momentum transfer (LMT) pulse sequences. We present simulation studies of robust Bragg pulses developed through numerical quantum optimal control. Optimized pulse performance under noise and cloud inhomogeneities is analyzed and compared to analogous Gaussian and adiabatic rapid passage pulses in simulated LMT Mach–Zehnder interferometry sequences. The optimized pulses maintain robust population transfer and phase response over a broader range of noise, resulting in superior contrast in LMT sequences with thermal atom clouds and intensity inhomogeneities. Large optimized LMT sequences use lower pulse area than Gaussian pulses, making them less susceptible to spontaneous emission loss. The optimized sequences maintain over five times better contrast with tens of ℏ k momentum separation and offer more improvement with greater LMT. Such pulses could allow operation of Bragg atom interferometers with unprecedented sensitivity, improved contrast, and hotter atom sources.
In recent years, atom interferometry has become established as an indispensable tool in both fundamental and applied physics. With present state-of-the-art devices based on thermal atoms reaching limits imposed by the momentum spread of the initial atomic wavepacket, it seems natural to ask whether colder sources such as Bose-Einstein condensates may prove beneficial in advancing the precision of interferometric measurements. The thesis at hand aims to inform this question, specifically by examining the role played by atomic interactions in interferometers based on Bose-condensed atoms. Interactions can have both advantageous and deleterious consequences in the context of atom interferometry. They provide a means to control the momentum width of the condensate, and facilitate the generation of nonclassical squeezed states which may enhance the phase sensitivity beyond the shot noise limit. Conversely, the condensate self-interaction causes mean-field shifts, multimode excitations and phase diffusion which can erode both the precision and the accuracy of an interferometric measurement. The question of when and in which systems the detrimental effects of interactions outweigh the advantages of using Bose-Einstein condensates is an important one, and warrants investigation. This thesis presents experimental studies into the role of interactions in both internal- and external-state atom interferometers. As a foundation for these investigations, we describe the design and construction of an apparatus for creating Bose-Einstein condensates of the two stable rubidium isotopes in an optical trap. By sympathetic cooling with a rubidium-87 reservoir, we are able to produce condensates of rubidium-85 in which the interactions may be adjusted by means of a magnetic Feshbach resonance. The tunability afforded by the Feshbach resonance is used to study inelastic losses in ultracold rubidium-85 clouds, as well as the effect of interactions on condensate stability and on the ground state of dual-species mixtures. In particular, we offer new experimental data on the dynamics of collapsing condensates with attractive interactions, over which some controversy has existed since the first experiments more than a decade ago. Good agreement is found between the measured collapse times and a simple mean-field model. Proceeding to interferometry, we present results from Ramsey interferometers operating on the clock transition of rubidium-87 Bose-Einstein condensates. In free-space operation with Raman beamsplitters, we demonstrate projection-noise-limited performance, an important prerequisite for the realisation of squeezing-enhanced sensitivity. Using large condensates of up to 10⁶ atoms and microwave coupling, we study the effect of interactions on the Ramsey fringe contrast. The dominant source of decoherence is found to be spatial dynamics driven by the difference in interparticle interaction strengths, which are analysed using the spin-echo technique and numerical simulations of the Gross-Pitaevskii equation. Finally, we turn our attention to external-state interferometry, implementing a Mach-Zehnder gravimeter using Bragg transitions in a freely falling rubidium-87 condensate. Large-momentum-transfer beamsplitters composed of higher-order Bragg diffraction and Bloch oscillations are used to increase the accumulated phase and thus the sensitivity of the interferometer. The role of interactions in this system is examined, and we canvass methods for achieving further increases in sensitivity.