Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

Secure Communications in Cooperative D2D Networks by Jointing Wyner’s Code and Network Coding

Hongliang He, Pinyi Ren

Published Jan 1, 2019• 7 citations
Publisher

Abstract

Due to the broadcast nature of wireless device-to-device networks, the transmission of private information is threatened by the exterior eavesdropping. Targeting at this problem, we jointly exploit the Wyner's code and the linear network coding, in this paper, to improve the security. The function of the Wyner's code requires the legitimate channel better than the eavesdropper's channel, so we propose a novel relay selection scheme to achieve this objective. Specifically, two groups of relays have been selected. Relays in one of the groups are selected to forward the private information, and relays in the other group are selected to transmit artificial noise. In this way, we make sure that the signal-to-noise ratio (SNR) at the legitimate receiver is larger than a target value but the SNR at the eavesdropper has a certain probability less than the target value so that the security can be enhanced. Moreover, focusing on the problem that the Wyner's code cannot achieve security if the SNR at the eavesdropper is larger than the target value, we propose a network coding method. In this method, the message to be transmitted is divided into multiple parts, and then these parts are correlated with each other by using network coding. Thus, the eavesdropper also cannot decode the private information even its SNR larger than the target value. We analyze the secrecy outage probability in theory, and the simulation results are provided to confirm our analysis.

DOI
10.1109/access.2019.2903253

Related papers

Improved relay selection for decode-and-forward cooperative wireless networks under secrecy rate maximization

Seifeddine Bouallegue, Mazen O. Hasna, Ridha Hamila +1 more

Privacy and security have an increasingly important role in wireless networks. A secure communication enables a legitimate destination to successfully retrieve information sent by a source, while it disables the eavesdropper (illegitimate destination) to interpret the intercepted information. Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without encryption. It exploits the physical characteristics of the wireless channel in order to transmit messages securely. They are typically feasible when the source-destination channel is better than the source-eavesdropper channel. Cooperative schemes are a means to improve the performance of secure wireless communications. We propose an improved relay selection scheme, based on source-eavesdropper channel SNR restriction, that will guarantee the best secrecy rate at the destination under QoS condition. Performance has been studied in terms of secrecy rate, outage probability and average error probability. Simulations shows that the proposed scheme outperforms in terms of the secrecy rate at the destination when compared to techniques in the literature.

International Wireless Communications and Mobile Computing Conference (IWCMC)•Aug 1, 2014•3 citations

Joint Physical Network Coding and Destination Aided Cooperative Jamming for Secure Wireless Sensor Networks

Dehuai Li, Xiguang Zhang, Yong Shang

In this paper, we investigate physical layer network coding (PNC) and destination assisted cooperative jamming (DACJ) for physical layer security in wireless sensor networks, in which there is one source, one destination, a cluster of intermediate nodes, and multiple eavesdroppers. Under the PNC protocol, the considered two-hop wireless sensor network implements a complete transmission process in two phases. In the first phase, through sending a jamming signal from the destination and exploiting the PNC at the relay, the relay decodes the exclusive-OR (XOR) performed form of the source and the jamming message. Therefore, the jamming signal can degrade the wire-tap channels without hampering the legitimate channel. In the second phase, the relay transmits the re-encoded message to the destination while eavesdroppers are out of work as they cannot extract information from the signal. Thus, the proposed design can significantly improve the performance of secure wireless communications. Meanwhile, the proposed schemes select one optimal node from the intermediate nodes and give an optimal solution of power allocation to maximize secrecy capacity. Numerical simulation results show that the proposed schemes have a better and more stable secrecy performance than the conventional schemes at the same power consumption.

IEEE Vehicular Technology Conference•May 1, 2016•1 citation

Joint Network Coding and ARQ Design Toward Secure Wireless Communications

Hongliang He, Pinyi Ren, Xiao Tang

The broadcast nature of wireless communications makes transmission susceptible to eavesdropping. Recently, physical-layer security has been extensively studied to secure the wireless transmissions, but the security is severely compromised when the eavesdropper has the superiority in the channel quality. Toward this issue, we in this paper propose a joint ARQ and network coding method exploiting the characteristics of both the physical layer and the link layer. Specifically, we relate the message to be transmitted in the current slot with the successfully decoded messages in previous slots, where the ARQ is employed at the legitimate side to guarantee the successful transmission and decoding. Once one or more received messages fail to be decoded at the eavesdropper, it further prevents the eavesdropper from decoding the transmissions in later slots and thus the message transmitted currently and later is secured at the legitimate side. Moreover, for the more disadvantageous case that the eavesdropper is geographically closer to the transmitter, we further propose a destination-aided network coding scheme, which secures private information no matter where the eavesdropper is. The closed-form expressions of intercept probability and loss probability of the private information are analytically presented. The simulation results are provided to confirm our theoretical findings.

IEEE Transactions on Communications•Jan 11, 2019•7 citations

Enhancing Physical Layer Security Through Cooperation in Wireless Networks

Jovana Božović, Enis Kočan

Physical Layer Security (PLS) provides a promising complementary approach to cryptographic methods for protecting wireless communications from eavesdropping. This paper investigates secrecy enhancement through cooperative relaying and jamming in a wireless network with two legitimate users, one eavesdropper, and five potential relay nodes operating in amplify-and-forward mode. Three relay–jammer selection strategies are considered: random relay and jammer selection, best-SNR (signal-to-noise ratio) relay with random jammer selection, and best-SNR relay with a jammer chosen based on the strongest channel toward the eavesdropper. The secrecy performance of these strategies are evaluated in terms of secrecy rate and secrecy outage probability. The results demonstrate that intelligent relay and jammer selection can significantly improve PLS compared to random selection, highlighting the benefits of cooperation in secure wireless systems.

•Feb 24, 2026•0 citations

Secrecy Capacity of Cooperative D2D Multi-relay Communication System with Multiple Protocols Based on Max-Min Relay Selection

Nurul Maulida Fitri, Yunida Yunida, Melinda Melinda +1 more

The utilization of other devices as relays in cooperative device-to-device (D2D) communication systems does not fully guarantee the security of confidential information from being intentionally or unintentionally accessed by eavesdroppers. Therefore, the implementation of a method to enhance the security performance of information is highly necessary. This paper proposes the application of relay selection mechanisms in a communication system with three relay protocols: Amplify-and-Forward (AF), Decode-and-Forward (DF), and Quantize-and-Forward (QF). The research method employs a mathematical modeling approach and simulations. The simulation results demonstrate an improvement in the level of information security in cooperative D2D communication systems using the proposed method in multiple relay protocols. The relay selection method has been evaluated and compared based on the Secrecy Outage Probability (SOP), which is one of the parameters for information security in the communication system. The SOP achieved is smaller with the implementation of the Max-Min relay selection technique in multi-relay cooperative communication networks. Considering the presence or absence of eavesdroppers, the SOP of the DF relay is smaller compared to other protocols. The impact of distance on secrecy capacity also indicates that the DF protocol utilizing multiple relays achieves higher results compared to other protocols, and the increased usage of relays also affects the simulation outcomes.

Jurnal Rekayasa Elektrika•Sep 25, 2023•1 citation

İşbirlikli ağlarda işbirlikli karıştırma teknikleri ile güvenli haberleşme

Erkan, Kerem

In cooperative communication, a source communicates with a destination over indirect links through relays. Like most wireless systems, cooperative networks seriously suffer from secrecy related issues. In this thesis, cooperative jamming method is utilized to provide secrecy for cooperative networks in which there exist adversary receivers called eavesdroppers. The main idea is to broadcast noise signals from a selected relay to corrupt the signal-to-interference-plus-noise ratio (SINR) at eavesdroppers when the transmitter communicates with the receiver through another selected relay. Throughout the study, it is assumed that channel state information (CSI) of the links between the source, relays and the destination is available at the transmit and receive sides of links. Rich scattering channels are assumed and all channel gains are taken as independent. In contrast to the past studies in the literature, CSI of eavesdroppers’ channels exist at only themselves since they are accepted as passive devices in this study. The knowledge on channel gains except eavesdroppers’ ones are used to adaptively select the relays to support cooperative jamming. Cooperative jamming is investigated here from an outage probability perspective where probability of secure transmission is the parameter of interest for a fixed transmission rate. First, cooperative jamming is applied to cooperative networks with single-antenna nodes. The probability of secure communication increases to a degree for a range of the communication rate R with cooperative jamming and adaptive selection of relays. The results are generally encouraging, but may be insufficient for real-world cooperative networks. Second, cooperative jamming is implemented at cooperative networks with multiple-antenna nodes to increase the probability of secure communication benefiting from advantages of multiple antennas. Adaptive transmit precoding is applied at the source and the communicating relay to enhance the SINR at legitimate receivers. This advantage brings an edge over eavesdroppers. Moreover, adaptive noise generation is proposed at the noise emitting relays in order to minimize the effect of noise at legitimate receivers. It is shown that the probability of secure communication dramatically rises with these adaptive techniques. As a result, there is a certain transmission rate R at which the source is able to securely communicate with the destination with probability approaching one.

•Jan 1, 2014•0 citations
Due to the broadcast nature of wireless device-to-device networks, the transmission of private information is threatened by the exterior eavesdropping. Targeting at this problem, we jointly exploit the Wyner's code and the linear network coding, in this paper, to improve the security. The function of the Wyner's code requires the legitimate channel better than the eavesdropper's channel, so we propose a novel relay selection scheme to achieve this objective. Specifically, two groups of relays have been selected. Relays in one of the groups are selected to forward the private information, and relays in the other group are selected to transmit artificial noise. In this way, we make sure that the signal-to-noise ratio (SNR) at the legitimate receiver is larger than a target value but the SNR at the eavesdropper has a certain probability less than the target value so that the security can be enhanced. Moreover, focusing on the problem that the Wyner's code cannot achieve security if the SNR at the eavesdropper is larger than the target value, we propose a network coding method. In this method, the message to be transmitted is divided into multiple parts, and then these parts are correlated with each other by using network coding. Thus, the eavesdropper also cannot decode the private information even its SNR larger than the target value. We analyze the secrecy outage probability in theory, and the simulation results are provided to confirm our analysis.
Privacy and security have an increasingly important role in wireless networks. A secure communication enables a legitimate destination to successfully retrieve information sent by a source, while it disables the eavesdropper (illegitimate destination) to interpret the intercepted information. Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without encryption. It exploits the physical characteristics of the wireless channel in order to transmit messages securely. They are typically feasible when the source-destination channel is better than the source-eavesdropper channel. Cooperative schemes are a means to improve the performance of secure wireless communications. We propose an improved relay selection scheme, based on source-eavesdropper channel SNR restriction, that will guarantee the best secrecy rate at the destination under QoS condition. Performance has been studied in terms of secrecy rate, outage probability and average error probability. Simulations shows that the proposed scheme outperforms in terms of the secrecy rate at the destination when compared to techniques in the literature.
In this paper, we investigate physical layer network coding (PNC) and destination assisted cooperative jamming (DACJ) for physical layer security in wireless sensor networks, in which there is one source, one destination, a cluster of intermediate nodes, and multiple eavesdroppers. Under the PNC protocol, the considered two-hop wireless sensor network implements a complete transmission process in two phases. In the first phase, through sending a jamming signal from the destination and exploiting the PNC at the relay, the relay decodes the exclusive-OR (XOR) performed form of the source and the jamming message. Therefore, the jamming signal can degrade the wire-tap channels without hampering the legitimate channel. In the second phase, the relay transmits the re-encoded message to the destination while eavesdroppers are out of work as they cannot extract information from the signal. Thus, the proposed design can significantly improve the performance of secure wireless communications. Meanwhile, the proposed schemes select one optimal node from the intermediate nodes and give an optimal solution of power allocation to maximize secrecy capacity. Numerical simulation results show that the proposed schemes have a better and more stable secrecy performance than the conventional schemes at the same power consumption.
The broadcast nature of wireless communications makes transmission susceptible to eavesdropping. Recently, physical-layer security has been extensively studied to secure the wireless transmissions, but the security is severely compromised when the eavesdropper has the superiority in the channel quality. Toward this issue, we in this paper propose a joint ARQ and network coding method exploiting the characteristics of both the physical layer and the link layer. Specifically, we relate the message to be transmitted in the current slot with the successfully decoded messages in previous slots, where the ARQ is employed at the legitimate side to guarantee the successful transmission and decoding. Once one or more received messages fail to be decoded at the eavesdropper, it further prevents the eavesdropper from decoding the transmissions in later slots and thus the message transmitted currently and later is secured at the legitimate side. Moreover, for the more disadvantageous case that the eavesdropper is geographically closer to the transmitter, we further propose a destination-aided network coding scheme, which secures private information no matter where the eavesdropper is. The closed-form expressions of intercept probability and loss probability of the private information are analytically presented. The simulation results are provided to confirm our theoretical findings.
Physical Layer Security (PLS) provides a promising complementary approach to cryptographic methods for protecting wireless communications from eavesdropping. This paper investigates secrecy enhancement through cooperative relaying and jamming in a wireless network with two legitimate users, one eavesdropper, and five potential relay nodes operating in amplify-and-forward mode. Three relay–jammer selection strategies are considered: random relay and jammer selection, best-SNR (signal-to-noise ratio) relay with random jammer selection, and best-SNR relay with a jammer chosen based on the strongest channel toward the eavesdropper. The secrecy performance of these strategies are evaluated in terms of secrecy rate and secrecy outage probability. The results demonstrate that intelligent relay and jammer selection can significantly improve PLS compared to random selection, highlighting the benefits of cooperation in secure wireless systems.
The utilization of other devices as relays in cooperative device-to-device (D2D) communication systems does not fully guarantee the security of confidential information from being intentionally or unintentionally accessed by eavesdroppers. Therefore, the implementation of a method to enhance the security performance of information is highly necessary. This paper proposes the application of relay selection mechanisms in a communication system with three relay protocols: Amplify-and-Forward (AF), Decode-and-Forward (DF), and Quantize-and-Forward (QF). The research method employs a mathematical modeling approach and simulations. The simulation results demonstrate an improvement in the level of information security in cooperative D2D communication systems using the proposed method in multiple relay protocols. The relay selection method has been evaluated and compared based on the Secrecy Outage Probability (SOP), which is one of the parameters for information security in the communication system. The SOP achieved is smaller with the implementation of the Max-Min relay selection technique in multi-relay cooperative communication networks. Considering the presence or absence of eavesdroppers, the SOP of the DF relay is smaller compared to other protocols. The impact of distance on secrecy capacity also indicates that the DF protocol utilizing multiple relays achieves higher results compared to other protocols, and the increased usage of relays also affects the simulation outcomes.
In cooperative communication, a source communicates with a destination over indirect links through relays. Like most wireless systems, cooperative networks seriously suffer from secrecy related issues. In this thesis, cooperative jamming method is utilized to provide secrecy for cooperative networks in which there exist adversary receivers called eavesdroppers. The main idea is to broadcast noise signals from a selected relay to corrupt the signal-to-interference-plus-noise ratio (SINR) at eavesdroppers when the transmitter communicates with the receiver through another selected relay. Throughout the study, it is assumed that channel state information (CSI) of the links between the source, relays and the destination is available at the transmit and receive sides of links. Rich scattering channels are assumed and all channel gains are taken as independent. In contrast to the past studies in the literature, CSI of eavesdroppers’ channels exist at only themselves since they are accepted as passive devices in this study. The knowledge on channel gains except eavesdroppers’ ones are used to adaptively select the relays to support cooperative jamming. Cooperative jamming is investigated here from an outage probability perspective where probability of secure transmission is the parameter of interest for a fixed transmission rate. First, cooperative jamming is applied to cooperative networks with single-antenna nodes. The probability of secure communication increases to a degree for a range of the communication rate R with cooperative jamming and adaptive selection of relays. The results are generally encouraging, but may be insufficient for real-world cooperative networks. Second, cooperative jamming is implemented at cooperative networks with multiple-antenna nodes to increase the probability of secure communication benefiting from advantages of multiple antennas. Adaptive transmit precoding is applied at the source and the communicating relay to enhance the SINR at legitimate receivers. This advantage brings an edge over eavesdroppers. Moreover, adaptive noise generation is proposed at the noise emitting relays in order to minimize the effect of noise at legitimate receivers. It is shown that the probability of secure communication dramatically rises with these adaptive techniques. As a result, there is a certain transmission rate R at which the source is able to securely communicate with the destination with probability approaching one.