Limitations of the computational and energy capabilities of IoT devices provide new challenges in securing communication between devices. Physical layer security (PHYSEC) is one of the solutions that can be used to solve the communication security challenges. In this paper, we conducted an investigation on PHYSEC which utilizes channel reciprocity in generating a secret key, commonly known as secret key generation (SKG) schemes. Our research focused on the efforts to get a simple SKG scheme by eliminating the information reconciliation stage so as to reduce the high computational and communication cost. We exploited the pre-processing method by proposing a modified Kalman (MK) and performing a combination of the method with a multilevel quantization, i.e., combined multilevel quantization (CMQ). Our approach produces a simple SKG scheme for its significant increase in reciprocity so that an identical secret key between two legitimate users can be obtained without going through the information reconciliation stage.
Limitations of the computational and energy capabilities of IoT devices provide new challenges in securing communication between devices. Physical layer security (PHYSEC) is one of the solutions that can be used to solve the communication security challenges. In this paper, we conducted an investigation on PHYSEC which utilizes channel reciprocity in generating a secret key, commonly known as secret key generation (SKG) schemes. Our research focused on the efforts to get a simple SKG scheme by eliminating the information reconciliation stage so as to reduce the high computational and communication cost. We exploited the pre-processing method by proposing a modified Kalman (MK) and performing a combination of the method with a multilevel quantization, i.e., combined multilevel quantization (CMQ). Our approach produces a simple SKG scheme for its significant increase in reciprocity so that an identical secret key between two legitimate users can be obtained without going through the information reconciliation stage.
The constraints imposed by the computational and energy capabilities of Internet of Things (IoT) devices are challenging for ensuring secure communication between these devices. One promising solution to address these security challenges is leveraging Physical Layer Security (PHYSEC) principles. This paper investigates in the area of PHYSEC, particularly focusing on the utilization of channel reciprocity for generating a secret key, commonly referred to as Physical Layer Secret Key Generation (PSKG), in Ultra-Wideband (UWB) technology. PSKG usually contain an Information Reconciliation (IR) stage to improve the probability for identical keys, which comes with substantial computational and communication cost. The primary objective of this paper is to eliminate this IR stage and its associated costs while still achieving a high probability for identical keys. To accomplish this goal, we propose a Pre-Processing (PP) stage involving a Discrete Fourier Transform (DFT)-based approach. This approach extracts reciprocal randomness from the Channel Impulse Response (CIR). By exploiting the CIR and our proposed PP stage, we were able to slightly improve the key generation rate while reducing the probability of successful attacks by a significant 87% in dynamic environments compared to the state-of-the-art. Notably, our approach does not require a training phase, making it more efficient for IoT devices.
The necessity for secured communication devices that has limited computing power has encouraged the development of key generation scheme. The generation of a symmetric key scheme that utilizes randomness of wireless channels offers a most promising solution as a result of the easy distribution of secret key mechanisms. In the last few years, various schemes have been proposed, but there are trade-offs between the performance parameters used. The expected parameters are the low Key Disagreement Rate (KDR), the high Key Generation Rate (KGR), and the fulfillment of standard of randomness. In this paper, we propose the use of a combination of pre-processing methods with multilevel lossy quantization to overcome the trade-off of performance parameters of the Secret Key Generation (SKG) scheme. Pre-process method used to improve reciprocity so as to reduce KDR, whereas multilevel quantization is used to improve the KGR. We use Kalman as the pre-processing method and Adaptive Quantization, Modified Multi-Bit (MMB), and 2-ary Quantization as the multilevel lossy quantization. Testing is conducted by comparing the performance between direct quantization with the addition of the pre-processing method in various multilevel lossy quantization schemes. The test results show that the use of Kalman as pre-processing methods and multilevel lossy quantization can overcome the trade-off performance parameters by reducing KDR and increasing KGR, with the best performance, was obtained when we use adaptive quantization. The resulting secret key has also fulfilled 6 random tests with p values greater than 0.01.
The Secret Key Generation (SKG) scheme that exploits the reciprocity and uniqueness of wireless channel between two users plays a significant part in a new increasing distributed security system. The scheme performance can be distinguished based on the low value of Key disagreement Rate (KDR), the high value of Key Generation Rate (KGR), as well as the fulfillment of the NIST randomness standard. The previous SKG scheme has a high KDR due to a direct quantization of a measurement result of the Received Signal Strength (RSS). To overcome the above issue, we conduct a pre-processing of measurement result before quantization with the Kalman method. The pre-process is carried out to improve the channel reciprocity between two legitimate users with the objective to reduce the bit mismatch. Through an experiment, we propose a new quantization scheme called a Modified Multi-Bit (MMB) that uses a multi-bit system on every level of quantization. The test results show that the proposed combination of preprocessing and the MMB scheme has a better performance compared to the existing schemes in terms of KDR and KGR. The Secret Key generated by our scheme also fulfills the NIST randomness standard.
In the rapidly evolving landscape of wireless communication, securing transmitted information remains a critical challenge. This study provides a comprehensive review of secret key generation (SKG) techniques designed to secure physical layer wireless communication channels. We focus on key generation methods that exploit physical layer characteristics such as channel state information, received signal strength, and bit error rate. The computational complexity of these techniques is also examined, emphasizing the trade-offs between security and efficiency for real-world implementations. The review identifies open challenges such as developing low-cost, resource-efficient systems, managing artificial noise, and addressing the impact of mobility and multiuser massive MIMO systems on SKG rates. Our findings aim to guide the development of more efficient, scalable SKG methods for next-generation wireless networks. Additionally, we propose a method for securely generating identical secret keys between nodes using Cuckoo filters and a Map-Reduce model for frame hashing, ensuring long-term security in IoT environments.
Secure wireless communication is an important requirement for portable devices operating in outdoor environments, where transmitted data can be easily intercepted by unauthorized nodes. This paper presents a performance analysis of Secret Key Generation (SKG) on portable devices for peer-to-peer communication. The proposed system generates a shared secret key from Received Signal Strength Indicator (RSSI) measurements without transmitting the key through the network. The SKG process consists of channel probing, Kalman Filter preprocessing, multibit quantization, BCH reconciliation, and privacy amplification using Universal Hash and SHA-1. The generated key is then used for AES-128 encryption for secure data transmission between legitimate devices. The performance evaluation is based on the best Kalman Filter configuration parameter Q<R and Q>R using the block data variations 1, 2, 4 and 10. The experimental results show that the Q<R with 10 block configuration has the highest RSSI correlation between Alice and Bob, which is 0.9129,0.9546, and 0.9238 in three test scenarios. The multibit quantization stage provides a stable Key Generation Rate (KGR) of up to 25.22 bit/s, while the BCH reconciliation successfully reduces the Key Disagreement Rate (KDR) between Alice and Bob to 0% in all cases. Eve, on the other hand, has a high KDR and does not get the same key as the legitimate devices. The results demonstrate that the presented SKG mechanism is capable of generating synchronized, random and secure keys for portable peer-to-peer communication.
Devices in the Internet of Things (IoT) are usually limited in computing resources and energy capacity, which means that encryption schemes with higher complexity are not suitable for them to ensure secure communication. As a promising solution to this problem, physical layer key generation suggests that shared secret keys can be generated from noisy wireless channel measurements to enhance the security of wireless communications. In this article, we propose a key generation scheme with extremely low implementation complexity, which allows physical layer key generation to be implemented on IoT nodes. First, we preprocess the channel measurements with simple moving average filtering before quantization to improve channel reciprocity. Next, a bidirectional difference quantization scheme is proposed to realize reliable quantization of channel measurements, which is ingenious in that the quantization process does not depend on quantization thresholds, and thus, the mismatched key bits caused by measurements close to quantization thresholds can be effectively avoided. Then, we propose an improved Cascade protocol to achieve lightweight and efficient information reconciliation. The simulation results show that our scheme can well balance the reliability and efficiency of key generation, and has excellent performance in terms of implementation complexity and key randomness.