Circuit Quantum Electrodynamics with superconductor-semiconductor hybrid systems
Pasquale Scarlino, David J. van Woerkom, Udson C. Mendes, Clemens Müller, Jonne Koski, Andreas Landig, Jann Hinnerk Ungerer, Christian Kraglund Andersen, Simone Gasparinetti, Christian Reichl, W. Wegscheider, K. Ensslin, Thomas Ihn, Alexandre Blais, Andreas J. Wallraff
Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots (QDs). Typically, semiconductor qubit-qubit coupling is short range, effectively limiting qubit distance to the spatial extent of the wavefunction of the confined particle (a few hundred nanometers). This is a significant constraint towards scaling of QD-based architectures to realize dense 1D or 2D arrays of QDs. Inspired by techniques originally developed for circuit QED, we recently demonstrated the strong coupling of individual electrons confined in GaAs quantum dots to individual microwave photons, making use of the enhanced electric component of the vacuum fluctuations of a resonator with impedance beyond the typical 50 Ohm of standard coplanar waveguides. In this hybrid technology, we recently realized a proof of concept experiment, where the coupling between a transmon and a double QD (DQD) is mediated by virtual microwave photon excitations in a high impedance SQUID array resonator, which acts as a quantum bus enabling long-range coupling between dissimilar qubits. Similarly, we achieved coherent coupling between two DQD charge qubits separated by approximately 50 um. In the dispersive regime, we spectroscopically observed qubit-qubit coupling as an avoided-crossing in the energy spectrum of the DQD charge qubits. The methods and techniques developed in this work are transferable to QD devices based on other material systems and can be beneficial for spin based hybrid systems.
Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots (QDs). Typically, semiconductor qubit-qubit coupling is short range, effectively limiting qubit distance to the spatial extent of the wavefunction of the confined particle (a few hundred nanometers). This is a significant constraint towards scaling of QD-based architectures to realize dense 1D or 2D arrays of QDs. Inspired by techniques originally developed for circuit QED, we recently demonstrated the strong coupling of individual electrons confined in GaAs quantum dots to individual microwave photons, making use of the enhanced electric component of the vacuum fluctuations of a resonator with impedance beyond the typical 50 Ohm of standard coplanar waveguides. In this hybrid technology, we recently realized a proof of concept experiment, where the coupling between a transmon and a double QD (DQD) is mediated by virtual microwave photon excitations in a high impedance SQUID array resonator, which acts as a quantum bus enabling long-range coupling between dissimilar qubits. Similarly, we achieved coherent coupling between two DQD charge qubits separated by approximately 50 um. In the dispersive regime, we spectroscopically observed qubit-qubit coupling as an avoided-crossing in the energy spectrum of the DQD charge qubits. The methods and techniques developed in this work are transferable to QD devices based on other material systems and can be beneficial for spin based hybrid systems.
We explore the coupling of the charge degree of freedom of electrons confined in a GaAs/AlGaAs double quantum dot (DQD) to a superconducting transmon qubit in the circuit QED architecture. In this work, we realize a proof of concept experiment in which the coupling between a transmon qubit and a DQD qubit is mediated by virtual microwave photon excitations in a tunable high impedance SQUID array resonator, which acts as a quantum bus enabling long range coupling between dissimilar qubits. Our device hosts a DQD capacitively coupled to a SQUID array resonator, which in turn is coupled to a single island transmon. The device is further equipped with a flux line for fast control of the transmon frequency, and with a 50 Ω CPW resonator capacitively coupled to the transmon for readout. Realizing a well controlled interface between semiconductor and superconductor-based quantum computing architectures will allow to take full advantage of those two solid states quantum systems for hybrid-quantum processors and will enable the use of both charge and flux degrees of freedom in the same device. The methods and techniques developed in this work are expected to be transferable to other material systems.
Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots. They constitute a promising approach to quantum information processing, complementary to superconducting qubits. Here, we demonstrate coherent coupling between a superconducting transmon qubit and a semiconductor double quantum dot (DQD) charge qubit mediated by virtual microwave photon excitations in a tunable high-impedance SQUID array resonator acting as a quantum bus. The transmon-charge qubit coherent coupling rate (~21 MHz) exceeds the linewidth of both the transmon (~0.8 MHz) and the DQD charge qubit (~2.7 MHz). By tuning the qubits into resonance for a controlled amount of time, we observe coherent oscillations between the constituents of this hybrid quantum system. These results enable a new class of experiments exploring the use of two-qubit interactions mediated by microwave photons to create entangled states between semiconductor and superconducting qubits.
Quantum computing is a powerful way of improving computing efficiency. For some specific problems, quantum processor can exponentially reduce computation time compared to the classical computer. Cavity quantum electrodynamics, which studies the coherent interaction between photons in an optical cavity and atoms or other two-level systems, is of enormous significance to quantum computing and quantum information processing. The strong coupling regime where a cavity photon mode and an atom exchange a single quantum energy coherently has attracted extensive interest in varied experimental platforms and systems such as alkali atoms, Rydberg atoms, large spin ensembles, magnons, etc. The semiconductor gate-defined double quantum dot (DQD) system is one of the most promising platforms that possesses advantages of advanced micro-nano processing technology and outstanding scalability. Introducing the concept of cavity QED into superconducting circuits (circuit QED, cQED), provides an opportunity to study interaction between electrons confined in semiconductor DQD and photons trapped in a superconducting resonator. Reaching strong coupling regime in this hybrid system paves the way to large-scale network of quantum computing. Electrons confined in DQD have large electrical dipoles, thus are able to couple to photons with relatively large coupling rate. Whereas, due to the charge noise and other dissipation channels in the hybrid system, the decoherence rate of the system is larger than the coupling rate, leaving the strong coupling a great challenge. In recent years, different methods have been proposed to access the strong coupling regime. Taking advantage of a high-quality heterojunction structure, an overlapping gate architecture and a low-pass LC filter on the DC bias line, the decoherence of the charge qubit and microwave leakage of the resonator can be effectively suppressed. The coupling strength of the hybrid system can be improved utilizing a high impedance resonator which is comprised of high kinetic inductance materials. Spin, which does not interact directly with the electric field, is insensitive to charge noise and has much longer decoherence time than charge qubit. However, the weak interaction results in a small coupling rate between the spin and the photon. To solve this problem, the method of coherent hybridization between the spin and the charge state is proposed to improve the coupling strength. This hybridization can be achieved by applying a non-uniform magnetic field, utilizing spin-orbit interaction or spin exchange interaction. At present, both charge qubits and spin qubits have achieved strong coupling with the cavity and the coupling distance between long-range qubits is greatly expanded as long as millimeters. This review introduces basic ideas about cQED and fundamental elements in semiconductor cQED systems. Recent progress in strong coupling hybrid system and methods for improving coupling structures are discussed. In future research, more efforts will be devoted into long-range transfer of qubit states and photon-mediated two or multi-qubit gates.
Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.
Semiconductor quantum dots in silicon demonstrate exceptionally long spin lifetimes as qubits and are therefore promising candidates for quantum information processing. However, control and readout techniques for these devices have thus far employed low frequency electrons, in contrast to high speed temperature readout techniques used in other qubit architectures, and coupling between multiple quantum dot qubits has not been satisfactorily addressed.This dissertation presents the design and characterization of a semiconductor charge qubit based on double quantum dot in silicon with an integrated microwave resonator for control and readout. The 6 GHz resonator is designed to achieve strong coupling with the quantum dot qubit, allowing the use of circuit QED control and readout techniques which have not previously been applicable to semiconductor qubits. To achieve this coupling, this document demonstrates successful operation of a novel silicon double quantum dot design with a single active metallic layer and a coplanar stripline resonator with a bias tee for dc excitation.Experiments presented here demonstrate quantum localization and measurement of both electrons on the quantum dot and photons in the resonator. Further, it is shown that the resonator-qubit coupling in these devices is sufficient to reach the strong coupling regime of circuit QED. The details of a measurement setup capable of performing simultaneous low noise measurements of the resonator and quantum dot structure are also presented here.The ultimate aim of this research is to integrate the long coherence times observed in electron spins in silicon with the sophisticated readout architectures available in circuit QED based quantum information systems. This would allow superconducting qubits to be coupled directly to semiconductor qubits to create hybrid quantum systems with separate quantum memory and processing components.
This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.