This chapter contains sections titled: Introduction Spin-oscillator Model Basic Definitions Thermodynamic Variables for G Master Equation Lindblad Superoperator Time Slot Operators Machine Cycles Choice of Amplitudes a(j)± and Control Functions θ(j)(τ) Heat and Work Energy Balance Fluctuations Numerical Results Heat Engine Heat Pump Longtime Limit Quantum Limit and Classical Limit Summary and Conclusions References
This chapter contains sections titled: Introduction Spin-oscillator Model Basic Definitions Thermodynamic Variables for G Master Equation Lindblad Superoperator Time Slot Operators Machine Cycles Choice of Amplitudes a(j)± and Control Functions θ(j)(τ) Heat and Work Energy Balance Fluctuations Numerical Results Heat Engine Heat Pump Longtime Limit Quantum Limit and Classical Limit Summary and Conclusions References
We investigate the dynamics of a quantum system consisting of a single spin coupled to an oscillator and sandwiched between two thermal baths at different temperatures. By means of an adequately designed Lindblad equation, it is shown that this device can function as a thermodynamic machine exhibiting Carnot-type cycles. For the present model, this means that when run as a heat engine, coherent motion of the oscillator is amplified. Contrary to the quantum computer, such a machine has a quantum as well as a classical limit. Away from the classical limit, it asymptotically approaches a stationary transport scenario.
The finite time performance of quantum heat engines has been examined with emphasis on the classical, high temperature, limit. Two basic engine models were studied, differing by their consistency of working fluid: the harmonic engine, consisting of noninteracting harmonic oscillators, and the spin-j engine, consisting of noninteracting spin-j subsystems. The two models represent two distinct types of engines, with bounded vs unbounded Hamiltonians, and with creation and annihilation operators of the Fermionic vs the Bosonic type. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are utilized. The dynamics of the engines was modeled by the semigroup approach. The engines were optimized with respect to various target functions: power, entropy production, and efficiency, while subject to finite cycle duration. The main strategy of optimization was based on the Euler–Lagrange equation, and is similar to that previously applied by Salamon and Nitzan for the investigation of Newtonian engines [J. Chem. Phys. 74, 3546 (1981)]. The optimal cycles obtained at the classical limit are not of the Curzon–Ahlborn type, i.e., the internal temperature along the thermal branches is not constant. This result is in conflict with Newtonian thermodynamics, where the optimal cycles are of the Curzon–Ahlborn type. Nonetheless, some of the main features of Newtonian thermodynamics, such as the Curzon–Ahlborn efficiency at maximum power, are reproduced at the classical limit. This makes it possible to establish a ‘‘thermodynamic correspondence principle.’’ This principle asserts that the phenomenological Newtonian thermodynamic approach provides an asymptote of a theory based upon the more fundamental semigroup quantum approach. It is argued that the asymptotic nature of Newtonian thermodynamics is twofold since its validity is restricted by two demands: that of high temperatures and that of proximity to equilibrium.
The theory of quantum thermodynamics investigates how the concepts of heat, work, and temperature can be carried over to the quantum realm, where fluctuations and randomness are fundamentally unavoidable. Of particular practical relevance is the investigation of quantum thermal machines: Machines that use the flow of heat in order to perform some useful task. In this lectures series, we give a brief introduction into how the laws of thermodynamics arise from quantum theory and how thermal machines can be described with Markovian quantum master equations. Recent results are illustrated with examples such as a quantum dot heat engine and a qubit entangler.
The concept of a quantum heat pump is proposed as a convenient model in the thermodynamic interpretation of certain multilevel processes. The ideal quantum heat engine is defined as an idealization of realistic pumped multilevel systems in much the same way that the well-known Carnot cycle is an idealization of physically realizable, classical processes or engines. There is evidence that the conventional Carnot cycle can be operated only between reservoirs at absolute temperatures of identical sign. No such restriction applies, however, to the quantum heat engine. Thus it may be used to calibrate negative absolute temperatures by relating them directly to positive temperatures. Negative efficiencies or efficiencies greater than unity have particularly simple interpretations in the quantum-heat-engine model. An important application of these concepts is in the calculation of optical maser parameters.
The operation of autonomous finite-time quantum heat engines relies on the existence of a stable limit cycle in which the dynamics becomes periodic. The two main questions that naturally arise are therefore whether such a limit cycle will eventually be reached and, once it has, what the state of the system is within the limit cycle. In this paper we show that the application of Floquet's theory to Lindblad dynamics offers clear answers to both questions. By moving to a generalized rotating frame, we show that it is possible to identify a single object, the Floquet Liouvillian, which encompasses all operating properties of the engine. First, its spectrum dictates the convergence to a limit cycle. Second, the state within the limit cycle is precisely its zero eigenstate, therefore reducing the problem to that of determining the steady state of a time-independent master equation. To illustrate the usefulness of this theory, we apply it to a harmonic oscillator subject to a time-periodic work protocol and time-periodic dissipation, an open-system generalization of the Ermakov-Lewis theory. The use of this theory to implement a finite-time Carnot engine subject to continuous frequency modulations is also discussed.
The finite-time operation of a quantum-mechanical heat engine with a working fluid consisting of many noninteracting spin-1/2 systems is considered. The engine is driven by an external, time-dependent and nonrotating magnetic field. The cycle of operation consists of two adiabats and two isotherms. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are developed. The irreversible operation of this engine is studied in three cases: (1) The sudden limit, where the performance is found to be the same as that of the spin analog of the Otto cycle. This case provides the lower bound of efficiency. (2) The step-cycle operation scheme. Here, the optimization of power is carried out in the high-temperature limit (the ‘‘classical’’ limit). The results obtained are similar to those of Andresen et al. [Phys. Rev. A 15, 2086 (1977)]. (3) The Curzon–Ahlborn operation scheme. The semigroup approach is used to model the dynamics. Then the power production is optimized. All the results obtained for Newtonian engines operating by the same scheme, such as the Curzon–Ahlborn efficiency, apply in the high-temperature limit. These results are obtained without the additional assumption of proximity to thermal equilibrium, implicitly implied by the use of Newtonian heat conduction in the original derivation. It seems that the results of the Curzon–Ahlborn analysis are always obtained in the high-temperature limit, irrespective of the details of the model. The performance beyond the classical limit is optimized numerically. The classical approximation is found to be valid for most of the spin-polarization range. The deviations from the classical limit depend heavily upon the specific nature of both the working fluid and the heat baths and exhibit great diversity and complexity.