Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Improvement of the intensity noise and frequency stabilization of Nd:YAP laser with an ultra-low expansion Fabry-Perot cavity

Juan Yu, Yue Qin, Zhihui Yan, Huadong Lu, Xiaojun Jia

Published Jan 30, 2019• 18 citations
Publisher

Abstract

Continuous-wave, single-frequency, solid-state lasers with long-term frequency stability and low-intensity noise are an essential resource to generate squeezed and entangled states of light. In order to obtain the stable, nonclassical states of light, the frequency of the laser has to be stabilized with a stable reference. Due to the zero expansion property at a certain temperature, an ultra-low expansion (ULE) Fabry-Perot (F-P) cavity with a high finesse can be used as one of the best candidates of the frequency reference. We perform a detailed analysis of an extraordinarily high-frequency stability and ultra-low-intensity noise laser based on an improved cascade Pound-Drever-Hall frequency stabilization to a ULE F-P cavity. The frequency drift of the laser is suppressed to 7.72 MHz in 4 hours, and the noise level of the laser is simultaneously reduced to the quantum noise limit in the frequency below 300 kHz, which provides the possibility for the direct generation of a stable, high-level squeezed state in a lower-frequency region.

DOI
10.1364/oe.27.003247

Related papers

A custom-built high-finesse reference cavity for cold Rydberg atom excitation

Jun-Ren Chen, Monal Yu-Hsuan Chang, Yi-Wei Liu

We present a custom-built ultra-low expansion (ULE) cavity system designed for high-precision laser frequency stabilization. The cavity mirrors are bonded to the ULE spacer using a low thermal expansion adhesive, and the assembled cavity exhibits a finesse of nearly $$3 \times 10^{4}$$ . A custom-designed multilayer aluminum housing was developed to passively isolate the cavity from environmental fluctuations. Long-term performance characterization reveals a frequency drift of approximately 164 kHz per day. After locking a diode laser to the cavity using the Pound-Drever-Hall technique, we achieve a linewidth of approximately $$19.4~\text {kHz}$$ and a fractional frequency stability of $$6.4 \times 10^{-13}$$ at 1 s. To validate the reliability of this frequency-stabilized laser system, we applied it to Rydberg excitation spectroscopy via trap-loss measurements of cold $$ ^{{87}} {\text{Rb}} $$ atoms. While the introduction of a custom intermediate circuit (I.C.) already reduces the linewidth from 34 to 6 MHz, cavity locking further suppresses frequency fluctuations, as evidenced by the enhanced stability in the trap-loss signal. Our system offers a robust and cost-effective solution for high-resolution spectroscopy, with applications in coherent control of Rydberg atoms.

Applied Physics B•Jul 29, 2025•1 citation

Medium-finesse optical cavity for the stabilization of Rydberg lasers

Julius de Hond, Nataly Cisternas, G. Lochead +1 more

We describe the design, construction, and characterization of a medium-finesse Fabry-Perot cavity for simultaneous frequency stabilization of two lasers operating at 960 and 780 nm wavelengths, respectively. The lasers are applied in experiments with ultracold rubidium Rydberg atoms, for which a combined laser linewidth similar to the natural Rydberg linewidth (≈10 kHz) is desired. The cavity, with a finesse of ≈1500, is used to reduce the linewidth of the lasers to below this level. By using a spacer made of ultra low expansion (ULE) glass with active temperature stabilization, the residual frequency drift is limited to ≲1 MHz/day. The design optimizes for ease of construction, robustness, and affordability.

arXiv:1705.04684•Applied Optics•Jun 22, 2017•24 citations

Frequency doubling and stabilization of a Tm,Ho:YLF laser at 2051 nm to a high finesse optical cavity

Adam Kleczewski, Matthew Hoffman, Eric Magnuson +2 more

Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall (PDH) method. A two channel feedback circuit allows for laser frequency stabilization with a bandwidth of 2 MHz. This laser system has been used to drive the 6S1/2 to 5D3/2 transition in 138Ba+, where a 2 ms laser-ion coherence times has been observed, demonstrating a linewidth of less than 500 Hz. The intensity noise of this system is analyzed and found to be acceptable for several proposed experiments on a single trapped barium ion.

arXiv:1105.4400•May 23, 2011•1 citation

Spectral filtering of dual lasers with a high-finesse length-tunable cavity for rubidium atom Rydberg excitation*

Yangyang Liu, Zhuo Fu, Peng Xu +3 more

We propose and demonstrate an alternative method for spectral filtering and frequency stabilization of both 780-nm and 960-nm lasers using a high-finesse length-tunable cavity (HFLTC). Firstly, the length of HFLTC is stabilized to a commercial frequency reference. Then, the two lasers are locked to this HFLTC using the Pound–Drever–Hall (PDH) method which can narrow the linewidths and stabilize the frequencies of both lasers simultaneously. Finally, the transmitted lasers of HFLTC with each power up to about 100 μW, which act as seed lasers, are amplified using the injection locking method for single-atom Rydberg excitation. The linewidths of obtained lasers are narrowed to be less than 1 kHz, meanwhile the obtained lasers’ phase noise around 750 kHz are suppressed about 30 dB. With the spectrally filtered lasers, we demonstrate a Rabi oscillation between the ground state and Rydberg state of single-atoms in an optical trap tweezer with a decay time of (67 ± 37) μs, which is almost not affected by laser phase noise. We found that the maximum short-term laser frequency fluctuation of a single excitation lasers is at ∼3.3 kHz and the maximum long-term laser frequency drift of a single laser is ∼46 kHz during one month. Our work develops a stable and repeatable method to provide multiple laser sources of ultra-low phase noise, narrow linewidth, and excellent frequency stability, which is essential for high precision atomic experiments, such as neutral atom quantum computing, quantum simulation, quantum metrology, and so on.

Chinese Physics B•Apr 19, 2021•5 citations

Sub-kilohertz excitation lasers for quantum information processing with Rydberg atoms

Remy Legaie, Craig Picken, Jonathan D. Pritchard

Quantum information processing using atomic qubits requires narrow linewidth lasers with long-term stability for high fidelity coherent manipulation of Rydberg states. In this paper, we report on the construction and characterization of three continuous-wave (CW) narrow linewidth lasers stabilized simultaneously to an ultra-high finesse Fabry-Perot cavity made of ultra-low expansion (ULE) glass, with a tunable offset-lock frequency. One laser operates at 852~nm while the two locked lasers at 1018~nm are frequency doubled to 509~nm for excitation of $^{133}$Cs atoms to Rydberg states. The optical beatnote at 509~nm is measured to be 260(5)~Hz. We present measurements of the offset between the atomic and cavity resonant frequencies using electromagnetically induced transparency (EIT) for high-resolution spectroscopy on a cold atom cloud. The long-term stability is determined from repeated spectra over a period of 20 days yielding a linear frequency drift of $\sim1$~Hz/s.

arXiv:1711.02645•Journal of the Optical Society of America B•Mar 21, 2018•38 citations

Low-intensity-noise single-frequency CW 1080 nm laser by employing a laser crystal with the small stimulated-emission cross section

Huiqi Yang, Hailong Wang, Jiaqi Song +4 more

Abstract An effective approach to obtain a single-frequency laser with low intensity noise is presented in this paper, which is implemented by employing a gain medium with the small stimulated-emission cross section (SECS). When the adopted Nd:YAP (Nd:YAlO 3 ) gain medium with SECS of 4.6×10 −19 cm 2 is replaced by Nd:CYA (Nd:CaYAlO 4 ) gain medium with SECS of 1.04×10 −19 cm 2 , the frequency of measured intensity noise reached shot noise limit obviously reduces from 2.49 to 1.5 MHz, which agrees well with the theoretical predictions. On this basis, a single-frequency continuous-wave (CW) Nd:CYA laser with low intensity noise is first achieved. The attained output power of the Nd:CYA laser is 1.12 W. The achieved single-frequency CW 1080 nm laser will satisfy the requirements of the squeezed and entangled light generation.

Laser Physics Letters•Mar 21, 2022•4 citations
Continuous-wave, single-frequency, solid-state lasers with long-term frequency stability and low-intensity noise are an essential resource to generate squeezed and entangled states of light. In order to obtain the stable, nonclassical states of light, the frequency of the laser has to be stabilized with a stable reference. Due to the zero expansion property at a certain temperature, an ultra-low expansion (ULE) Fabry-Perot (F-P) cavity with a high finesse can be used as one of the best candidates of the frequency reference. We perform a detailed analysis of an extraordinarily high-frequency stability and ultra-low-intensity noise laser based on an improved cascade Pound-Drever-Hall frequency stabilization to a ULE F-P cavity. The frequency drift of the laser is suppressed to 7.72 MHz in 4 hours, and the noise level of the laser is simultaneously reduced to the quantum noise limit in the frequency below 300 kHz, which provides the possibility for the direct generation of a stable, high-level squeezed state in a lower-frequency region.
We present a custom-built ultra-low expansion (ULE) cavity system designed for high-precision laser frequency stabilization. The cavity mirrors are bonded to the ULE spacer using a low thermal expansion adhesive, and the assembled cavity exhibits a finesse of nearly 3×1043 \times 10^{4}3×104 . A custom-designed multilayer aluminum housing was developed to passively isolate the cavity from environmental fluctuations. Long-term performance characterization reveals a frequency drift of approximately 164 kHz per day. After locking a diode laser to the cavity using the Pound-Drever-Hall technique, we achieve a linewidth of approximately 19.4 kHz19.4~\text {kHz}19.4 kHz and a fractional frequency stability of 6.4×10−136.4 \times 10^{-13}6.4×10−13 at 1 s. To validate the reliability of this frequency-stabilized laser system, we applied it to Rydberg excitation spectroscopy via trap-loss measurements of cold 87Rb ^{{87}} {\text{Rb}} 87Rb atoms. While the introduction of a custom intermediate circuit (I.C.) already reduces the linewidth from 34 to 6 MHz, cavity locking further suppresses frequency fluctuations, as evidenced by the enhanced stability in the trap-loss signal. Our system offers a robust and cost-effective solution for high-resolution spectroscopy, with applications in coherent control of Rydberg atoms.
We describe the design, construction, and characterization of a medium-finesse Fabry-Perot cavity for simultaneous frequency stabilization of two lasers operating at 960 and 780 nm wavelengths, respectively. The lasers are applied in experiments with ultracold rubidium Rydberg atoms, for which a combined laser linewidth similar to the natural Rydberg linewidth (≈10 kHz) is desired. The cavity, with a finesse of ≈1500, is used to reduce the linewidth of the lasers to below this level. By using a spacer made of ultra low expansion (ULE) glass with active temperature stabilization, the residual frequency drift is limited to ≲1 MHz/day. The design optimizes for ease of construction, robustness, and affordability.
Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall (PDH) method. A two channel feedback circuit allows for laser frequency stabilization with a bandwidth of 2 MHz. This laser system has been used to drive the 6S1/2 to 5D3/2 transition in 138Ba+, where a 2 ms laser-ion coherence times has been observed, demonstrating a linewidth of less than 500 Hz. The intensity noise of this system is analyzed and found to be acceptable for several proposed experiments on a single trapped barium ion.
We propose and demonstrate an alternative method for spectral filtering and frequency stabilization of both 780-nm and 960-nm lasers using a high-finesse length-tunable cavity (HFLTC). Firstly, the length of HFLTC is stabilized to a commercial frequency reference. Then, the two lasers are locked to this HFLTC using the Pound–Drever–Hall (PDH) method which can narrow the linewidths and stabilize the frequencies of both lasers simultaneously. Finally, the transmitted lasers of HFLTC with each power up to about 100 μW, which act as seed lasers, are amplified using the injection locking method for single-atom Rydberg excitation. The linewidths of obtained lasers are narrowed to be less than 1 kHz, meanwhile the obtained lasers’ phase noise around 750 kHz are suppressed about 30 dB. With the spectrally filtered lasers, we demonstrate a Rabi oscillation between the ground state and Rydberg state of single-atoms in an optical trap tweezer with a decay time of (67 ± 37) μs, which is almost not affected by laser phase noise. We found that the maximum short-term laser frequency fluctuation of a single excitation lasers is at ∼3.3 kHz and the maximum long-term laser frequency drift of a single laser is ∼46 kHz during one month. Our work develops a stable and repeatable method to provide multiple laser sources of ultra-low phase noise, narrow linewidth, and excellent frequency stability, which is essential for high precision atomic experiments, such as neutral atom quantum computing, quantum simulation, quantum metrology, and so on.
Quantum information processing using atomic qubits requires narrow linewidth lasers with long-term stability for high fidelity coherent manipulation of Rydberg states. In this paper, we report on the construction and characterization of three continuous-wave (CW) narrow linewidth lasers stabilized simultaneously to an ultra-high finesse Fabry-Perot cavity made of ultra-low expansion (ULE) glass, with a tunable offset-lock frequency. One laser operates at 852~nm while the two locked lasers at 1018~nm are frequency doubled to 509~nm for excitation of 133^{133}133Cs atoms to Rydberg states. The optical beatnote at 509~nm is measured to be 260(5)~Hz. We present measurements of the offset between the atomic and cavity resonant frequencies using electromagnetically induced transparency (EIT) for high-resolution spectroscopy on a cold atom cloud. The long-term stability is determined from repeated spectra over a period of 20 days yielding a linear frequency drift of ∼1\sim1∼1~Hz/s.
Abstract An effective approach to obtain a single-frequency laser with low intensity noise is presented in this paper, which is implemented by employing a gain medium with the small stimulated-emission cross section (SECS). When the adopted Nd:YAP (Nd:YAlO 3 ) gain medium with SECS of 4.6×10 −19 cm 2 is replaced by Nd:CYA (Nd:CaYAlO 4 ) gain medium with SECS of 1.04×10 −19 cm 2 , the frequency of measured intensity noise reached shot noise limit obviously reduces from 2.49 to 1.5 MHz, which agrees well with the theoretical predictions. On this basis, a single-frequency continuous-wave (CW) Nd:CYA laser with low intensity noise is first achieved. The attained output power of the Nd:CYA laser is 1.12 W. The achieved single-frequency CW 1080 nm laser will satisfy the requirements of the squeezed and entangled light generation.