Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nb/Al-AlN/Nb superconducting tunnel junctions: fabrication process and characterization results

Alexey Pavolotsky, Vincent Desmaris, Victor Belitsky

Published Jan 1, 2018• 0 citations
OpenAlex

Abstract

Modern radio astronomy demands for broadbandreceiver systems. For SIS mixers, this translates into objective toemploysuperconducting tunnel junctions with very low RnA andlow specific capacitance. The traditionally used Nb/AlOx/Nbjunctions have largely approached their physical limit ofminimizing those parameters. It is commonly recognized that it isAlN-barrier junctions, which are needed for further progressingof the broadband instrumentation for radio astronomy. Inmanuscript we present results of developing a fabrication processfor high quality Nb/Al-AlN/Nb junctions and characterization thejunctions’ DC electric properties and their aging and annealingstability, as well as the junctions’ specific capacitance.

Related papers

Specific capacitance of Nb/Al-AlN/Nb superconducting tunnel junctions

Alexey Pavolotsky, Cristian Daniel López, Isabel Vrethed Tidekrans +3 more

Modern radio astronomy demands for broadband receiver systems. For SIS mixers, this translates into objective to employ superconducting tunnel junctions with a very low RnA and low specific capacitance. The traditionally used Nb/AlOx/Nb junctions have largely approached their physical limit ofminimizing those parameters. It is commonly recognized that it is AlN-barrier junctions, which are needed for further progressing of the broadband SIS mixer instrumentation for radio astronomy. In this work, we present the progress in fabrication of high quality Nb/Al-AlN/Nb superconducting tunnel (SIS) junctions and their characterization in terms DC electric properties junctions’ specific capacitance.

•Jan 1, 2019•1 citation

Fabrication and characterization of Nb/Al-AlN/Nb superconducting tunnel junctions

Alexey Pavolotsky, François Joint, Udupa Sujit Manjunatha +6 more

Abstract We report a Nb/Al-AlN/Nb superconducting tunnel junction process in which the AlN barrier is formed by plasma nitridation using a compact microwave electron cyclotron resonance (ECR) nitrogen plasma source integrated into a standard sputter cluster. This enables growth of uniform tunnel barriers across a broad range of specific resistances, with R n A down to ≃ 3 Ω μ m 2 . Junctions maintain excellent quality, exhibiting R j / R n ⩾ 25 at the highest barrier transparencies. We characterize resistivity, specific capacitance, and the evolution of junction parameters under room temperature aging and thermal annealing. A consistent calibration of the junction specific capacitance C s versus R n A is established and independently validated by the performance of demonstrator SIS mixers designed using the extracted C s .

arXiv:2512.06994•Superconductor Science and Technology•Dec 18, 2025•5 citations

Very high-current-density Nb/AlN/Nb tunnel junctions for low-noise submillimeter mixers

Jonathan H. Kawamura, David Miller, Jian Chen +4 more

We have fabricated and tested submillimeter-wave superconductor–insulator–superconductor (SIS) mixers using very high-current-density Nb/AlN/Nb tunnel junctions (Jc≈30 kA cm−2). The junctions have low-resistance-area products (RNA≈5.6 Ω μm2), good subgap-to-normal resistance ratios Rsg/RN≈10, and good run-to-run reproducibility. From Fourier transform spectrometer measurements, we infer that ωRNC=1 at 270 GHz. This is a factor of 2.5 improvement over what is generally available with Nb/AlOx/Nb junctions suitable for low-noise mixers. The AlN-barrier junctions are indeed capable of low-noise operation: we measure an uncorrected double-sideband receiver noise temperature of TRX=110 K at 533 GHz for an unoptimized device. In addition to providing wider bandwidth operation at lower frequencies, the AlN-barrier junctions will considerably improve the performance of THz SIS mixers by reducing rf loss in the tuning circuits.

Applied Physics Letters•Apr 10, 2000•55 citations

Fabrication of ultrasmall Nb-AlOx-Nb Josephson tunnel junctions

John M. Martinis, Ronald H. Ono

We describe a fabrication process to make Nb-AlOx-Nb edge junctions with areas as small as 0.0022 μm2 and with current densities from 10 to 24 000 A/cm2. The junction conductance was low for voltages below the superconducting energy gap which indicates good quality tunnel barriers. Coulomb gap measurements obtained when the junctions were in the normal state were used to find the junction capacitance. Junction capacitance as small as 0.18 fF has been measured.

Applied Physics Letters•Aug 6, 1990•34 citations

Fabrication of Nb/Al-N/sub x//NbTiN junctions for SIS mixer applications

B. Bumble, Henry George LeDuc, Jeff A. Stern +1 more

We discuss fabrication and characteristics of superconductor-insulator-superconductor (SIS) junctions which typically exhibit a 3.5 mV sum-gap voltage. Junctions have a sub-gap to normal state resistance ratio of R/sub SG//R/sub N/=27 for resistance-area products down to R/sub N/A=8 /spl Omega/ /spl mu/m/sup 2/ and high quality junctions have been produced with RNA products as low as 4 /spl Omega/ /spl mu/m/sup 2/. The device structure incorporates a Nb base electrode, a tunnel barrier formed by plasma nitridation of a thin Al proximity layer, and a NbTiN counter-electrode. Results for all Nb junctions with high current density aluminum-nitride barriers are also shown. Nitridation of the aluminum layer is investigated by control of the dc floating potential on a separate rf driven electrode in the vacuum process chamber. Devices are integrated to a mixer antenna structure incorporating NbTiN as a ground plane. The wire circuit layer can be either normal metal or NbTiN. Annealing results show improved I-V characteristics with increased RNA products. Recent receiver measurements employing these junctions exhibit low noise performance up to 900 GHz.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•53 citations

Characterisation of the Specific Capacitance of Superconducting Tunnel Junctions

Parisa Yadranjee Aghdam

Superconductor-Insulator-Superconductor (SIS) tunnel junctions are widely used as the mixing component in mm and sub-mm receivers for radio astronomy and environmental science. SIS mixers offer superior noise performance close to the quantum limit for frequencies up to 1 THz. An important property of an SIS junction is the intrinsic specific capacitance (Cs), which is defined by the geometrical capacitance (Cj) divided by the junction area (A). In order to prevent loss of the RF signal, a tuning circuitry is required to resonate out the Cj. The RF bandwidth of an SIS mixer is determined by the quality factor of the resulted resonator-like tuning circuitry, Q = ωRnCj, where Rn is the normal resistance of the junction and ω is the angular frequency. In order to increase the RF bandwidth of the mixer, junctions with lower specific resistance (RnA) and hence thinner insulator layer are required. For the practical SIS mixers, junctions with RnA 100 Ω.µm2 (often as low as 20 Ω.µm2) are typically used. In this RnA range, the published data on the Cs vs. RnA are often spread and not consistent between different sources. Therefore, at this limit, the design of an accurate tuning circuitry becomes challenging. Hence, there is a well-recognized demand for accurate measurement of Cs.\nSo far, all the developed characterisation methods measured the specific capacitance effect indirectly, e.g., in a resonant circuit. In this context, the specific capacitance was extracted by fitting the measurement data into a theoretical model. In this thesis, a new method was developed, which directly measures the junction capacitance at microwave frequencies (1 - 7 GHz) with estimated uncertainty varying from ±2% to ±11% depending on the junction area. In this measurement method, an original calibration approach was suggested and implemented.\nUsing this method, the capacitance of 34 junctions with various RnA values ranging from 8 to 68 Ω.µm2 was measured. The observed scatter in the specific capacitance is discussed. We argue that, it is the tunnel barrier (thickness) nonuniformity, which is responsible for the observed spread of the Cs data. The nonlinear capacitance as a result of the Kramers-Kronig transformation of the dc IV characteristic of the SIS junction was shown to be a significant contribution for RnA 40 Ω.µm2 even at frequencies as low as 1-7 GHz. The extracted specific capacitance from the measurements was corrected for the nonlinear capacitance. The obtained Cs(RnA) data agrees well with the model relation Cs = a/ln(RnA), where a =0.227 for the RnA 40 Ω.µm2. \n

•Jan 1, 2015•0 citations
Modern radio astronomy demands for broadbandreceiver systems. For SIS mixers, this translates into objective toemploysuperconducting tunnel junctions with very low RnA andlow specific capacitance. The traditionally used Nb/AlOx/Nbjunctions have largely approached their physical limit ofminimizing those parameters. It is commonly recognized that it isAlN-barrier junctions, which are needed for further progressingof the broadband instrumentation for radio astronomy. Inmanuscript we present results of developing a fabrication processfor high quality Nb/Al-AlN/Nb junctions and characterization thejunctions’ DC electric properties and their aging and annealingstability, as well as the junctions’ specific capacitance.
Modern radio astronomy demands for broadband receiver systems. For SIS mixers, this translates into objective to employ superconducting tunnel junctions with a very low RnA and low specific capacitance. The traditionally used Nb/AlOx/Nb junctions have largely approached their physical limit ofminimizing those parameters. It is commonly recognized that it is AlN-barrier junctions, which are needed for further progressing of the broadband SIS mixer instrumentation for radio astronomy. In this work, we present the progress in fabrication of high quality Nb/Al-AlN/Nb superconducting tunnel (SIS) junctions and their characterization in terms DC electric properties junctions’ specific capacitance.
Abstract We report a Nb/Al-AlN/Nb superconducting tunnel junction process in which the AlN barrier is formed by plasma nitridation using a compact microwave electron cyclotron resonance (ECR) nitrogen plasma source integrated into a standard sputter cluster. This enables growth of uniform tunnel barriers across a broad range of specific resistances, with R n A down to ≃ 3 Ω μ m 2 . Junctions maintain excellent quality, exhibiting R j / R n ⩾ 25 at the highest barrier transparencies. We characterize resistivity, specific capacitance, and the evolution of junction parameters under room temperature aging and thermal annealing. A consistent calibration of the junction specific capacitance C s versus R n A is established and independently validated by the performance of demonstrator SIS mixers designed using the extracted C s .
We have fabricated and tested submillimeter-wave superconductor–insulator–superconductor (SIS) mixers using very high-current-density Nb/AlN/Nb tunnel junctions (Jc≈30 kA cm−2). The junctions have low-resistance-area products (RNA≈5.6 Ω μm2), good subgap-to-normal resistance ratios Rsg/RN≈10, and good run-to-run reproducibility. From Fourier transform spectrometer measurements, we infer that ωRNC=1 at 270 GHz. This is a factor of 2.5 improvement over what is generally available with Nb/AlOx/Nb junctions suitable for low-noise mixers. The AlN-barrier junctions are indeed capable of low-noise operation: we measure an uncorrected double-sideband receiver noise temperature of TRX=110 K at 533 GHz for an unoptimized device. In addition to providing wider bandwidth operation at lower frequencies, the AlN-barrier junctions will considerably improve the performance of THz SIS mixers by reducing rf loss in the tuning circuits.
We discuss fabrication and characteristics of superconductor-insulator-superconductor (SIS) junctions which typically exhibit a 3.5 mV sum-gap voltage. Junctions have a sub-gap to normal state resistance ratio of R/sub SG//R/sub N/=27 for resistance-area products down to R/sub N/A=8 /spl Omega/ /spl mu/m/sup 2/ and high quality junctions have been produced with RNA products as low as 4 /spl Omega/ /spl mu/m/sup 2/. The device structure incorporates a Nb base electrode, a tunnel barrier formed by plasma nitridation of a thin Al proximity layer, and a NbTiN counter-electrode. Results for all Nb junctions with high current density aluminum-nitride barriers are also shown. Nitridation of the aluminum layer is investigated by control of the dc floating potential on a separate rf driven electrode in the vacuum process chamber. Devices are integrated to a mixer antenna structure incorporating NbTiN as a ground plane. The wire circuit layer can be either normal metal or NbTiN. Annealing results show improved I-V characteristics with increased RNA products. Recent receiver measurements employing these junctions exhibit low noise performance up to 900 GHz.
Superconductor-Insulator-Superconductor (SIS) tunnel junctions are widely used as the mixing component in mm and sub-mm receivers for radio astronomy and environmental science. SIS mixers offer superior noise performance close to the quantum limit for frequencies up to 1 THz. An important property of an SIS junction is the intrinsic specific capacitance (Cs), which is defined by the geometrical capacitance (Cj) divided by the junction area (A). In order to prevent loss of the RF signal, a tuning circuitry is required to resonate out the Cj. The RF bandwidth of an SIS mixer is determined by the quality factor of the resulted resonator-like tuning circuitry, Q = ωRnCj, where Rn is the normal resistance of the junction and ω is the angular frequency. In order to increase the RF bandwidth of the mixer, junctions with lower specific resistance (RnA) and hence thinner insulator layer are required. For the practical SIS mixers, junctions with RnA 100 Ω.µm2 (often as low as 20 Ω.µm2) are typically used. In this RnA range, the published data on the Cs vs. RnA are often spread and not consistent between different sources. Therefore, at this limit, the design of an accurate tuning circuitry becomes challenging. Hence, there is a well-recognized demand for accurate measurement of Cs.\nSo far, all the developed characterisation methods measured the specific capacitance effect indirectly, e.g., in a resonant circuit. In this context, the specific capacitance was extracted by fitting the measurement data into a theoretical model. In this thesis, a new method was developed, which directly measures the junction capacitance at microwave frequencies (1 - 7 GHz) with estimated uncertainty varying from ±2% to ±11% depending on the junction area. In this measurement method, an original calibration approach was suggested and implemented.\nUsing this method, the capacitance of 34 junctions with various RnA values ranging from 8 to 68 Ω.µm2 was measured. The observed scatter in the specific capacitance is discussed. We argue that, it is the tunnel barrier (thickness) nonuniformity, which is responsible for the observed spread of the Cs data. The nonlinear capacitance as a result of the Kramers-Kronig transformation of the dc IV characteristic of the SIS junction was shown to be a significant contribution for RnA 40 Ω.µm2 even at frequencies as low as 1-7 GHz. The extracted specific capacitance from the measurements was corrected for the nonlinear capacitance. The obtained Cs(RnA) data agrees well with the model relation Cs = a/ln(RnA), where a =0.227 for the RnA 40 Ω.µm2. \n