All physical quantum systems are in contact with the external world which is inevitably a source of noise. It is therefore necessary to take into account this dissipation when designing controls that accomplish useful tasks in quantum information processing. This thesis is on that overlap of open quantum systems and control theory; it looks at what dynamics can happen with the use of external driving, and how this driving can be chosen to accomplish a desired goal. The first result looks at how a given quantum dissipator can be manipulated, using coherent controls, into replicating the action of a different type of noise. This results in no-go theorems for how noise can be transformed based on its isotropy, with applications in simulating open systems. Another way of doing simulations is to use only unitary dynamics over the system and a finite dimensional ancilla, and it is proved that there always exists a dilation Hamiltonian that replicates the noisy dynamics continuously in time. This also highlights the fact that adding controls on noise can result in a different evolution than if the controls were done on the under- lying system-environment level. A conjecture is introduced and studied which states that both approaches are equivalent in the special case of the controls commuting with the Lindbladian. A way around this difficulty is to use a quantum system to compute in situ which controls are best for achieving a desired task on itself. This problem is studied in the context of reaching entangling gates on a quantum simulator in order to upgrade it into a quantum computer. The experimental cost of doing so is found to be polynomial in the number of qubits in simulations. The same underlying principle is also used to find error correcting codes tailored to the dissipation in a system.
All physical quantum systems are in contact with the external world which is inevitably a source of noise. It is therefore necessary to take into account this dissipation when designing controls that accomplish useful tasks in quantum information processing. This thesis is on that overlap of open quantum systems and control theory; it looks at what dynamics can happen with the use of external driving, and how this driving can be chosen to accomplish a desired goal. The first result looks at how a given quantum dissipator can be manipulated, using coherent controls, into replicating the action of a different type of noise. This results in no-go theorems for how noise can be transformed based on its isotropy, with applications in simulating open systems. Another way of doing simulations is to use only unitary dynamics over the system and a finite dimensional ancilla, and it is proved that there always exists a dilation Hamiltonian that replicates the noisy dynamics continuously in time. This also highlights the fact that adding controls on noise can result in a different evolution than if the controls were done on the under- lying system-environment level. A conjecture is introduced and studied which states that both approaches are equivalent in the special case of the controls commuting with the Lindbladian. A way around this difficulty is to use a quantum system to compute in situ which controls are best for achieving a desired task on itself. This problem is studied in the context of reaching entangling gates on a quantum simulator in order to upgrade it into a quantum computer. The experimental cost of doing so is found to be polynomial in the number of qubits in simulations. The same underlying principle is also used to find error correcting codes tailored to the dissipation in a system.
Known as decoherence, the unavoidable interaction of a quantum system with its surrounding environment is usually considered to be detrimental for quantum information processing. In this thesis the coherent, open loop control of such open systems is studied. Concepts from quantum control theory and the theory of open quantum system are adopted in order to fight decoherence and implement quantum gates in a noiseless manner. In particular, Lie algebraic methods and numerical optimization tools are used to investigate the control properties of a single spin interacting with a spin environment. We show that, independent of the size of the environment, every unitary transformation can be implemented on the system spin through a single control field. We proceed by investigating dynamical decoupling, a method to suppress the interactions with the environment, for finite- and for in- finite dimensional systems. We prove that every finite dimensional system can be protected from decoherence, even if the environment is infinite dimensional, whereas for noise described by a Lindblad master equation dynamical decoupling will never succeed. This will lead to a new method to distinguish decoherence from intrinsic noise terms. We further prove that not every infinite dimensional system can be protected from decoherence through dynamical decoupling. Afterwards we investigate dynamical decoupling of systems that are described by quadratic Hamiltonians, showing that such interactions can always be suppressed with two simple operations. In the last part we investigate the coherent control of a Lindblad master equation. We show that a strong noise process exhibiting a decoherence free subspace can substantially increase the number of unitary operations that can be implemented, allowing us to fully control parts of the system. Afterwards we develop a scheme to make Hamiltonians and Lindbladians commutative by adding an auxiliary system. The old, possibly non-commutative dynamics, is recovered through a non-selective measurement.
Abstract We apply the Krotov method (KM) for open and closed quantum systems to find optimized controls to manipulate qubit/qutrit systems in the presence of the external environment. In the case of unitary optimization, the KM is first applied to a quantum system neglecting its interaction with the environment. The resulting controls from the unitary optimization are then used to drive the system along with the environmental noise. In the case of non-unitary optimization, the KM already takes into account the noise during the optimization process. We consider two distinct computational tasks: target-state preparation and quantum gate implementation. These tasks are carried out in simple qubit/qutrit systems and also in systems presenting leakage states. For the state preparation cases, the controls from the non-unitary optimization outperform the controls from the unitary optimization. However, as we show here, this is not always true for the implementation of quantum gates. There are some situations where the unitary optimization performs equally well compared to the non-unitary optimization. We verify that these situations correspond to either the absence of leakage states or to the effects of dissipation being spread uniformly over the system, including non-computational levels. For such cases, the quantum gate implementation must cover the entire Hilbert space and there is no way to dodge dissipation. On the other hand, if the subspace containing the computational levels and its complement are differently affected by dissipation, the non-unitary optimization becomes effective.
Control of open quantum systems is essential for the realization of contemporary quantum science and technology. We demonstrate such control using a thermodynamically consistent framework, taking into account the fact that the drive can modify the system's interaction with the environment. Such an effect is incorporated within the dynamical equation, leading to control-dependent dissipation. This relation serves as the key element for open-system control. The control paradigm is displayed by analyzing entropy-changing state-to-state transformations, such as heating and cooling. The difficult task of controlling quantum gates is achieved for nonunitary reset maps with complete memory loss. In addition, we identify a mechanism for controlling unitary gates by actively removing entropy from the system to the environment. We demonstrate a universal set of single- and double-qubit unitary gates under dissipation.
For several decades it has been appreciated that quantum computers hold incredible promise to perform calculations intractable to classical computation. However, this promise has be slow to realize. Dozens of quantum systems are currently being investigated for use in quantum information processing - none of which have yet demonstrated algorithms involving more than a handful of qubits and it remains unclear which, if any, of these systems will ultimately compose a scalable, robust quantum information processing architecture. In this thesis we employ analytical, optimal and algebraic control techniques to evaluate various quantum systems for their potential use in quantum information processing. In doing so, we have additionally identified several novel characterization procedures capable of probing both the coherent and incoherent dynamics of quantum systems. The first part of this thesis discusses work motivated by attempts to utilize donor qubits in silicon as quantum bits. We first propose a measurement of the state of a single donor electron spin using two-dimensional electron gas of a field-effect transistor and electrically detected magnetic resonance. We analyze the potential sensitivity of this measurement and show that it is a quantum nondemolition measurement of an electron-encoded state. We then present the first of two novel qubit characterization procedures. We consider the problem of rapidly characterizing a large number of similarly prepared qubits using techniques from optimal experiment design. All qubits are assumed to evolve according to the same physical processes, though the Hamiltonian parameters may vary from device to device - an inevitability in solid state qubits. We use the Cram\\'er-Rao bound on the variance of a point estimator to construct the optimal series of experiments to estimate these free parameters, and present a complete analysis of the optimal experimental configuration. Though applied to dipole- and exchange-coupled qubits, this technique is widely applicable to other systems. The second part of the thesis discusses the role that control can play in measuring and mitigating noise in qubit systems. Our first result describes a method for quickly simulating the effects of arbitrary markovian noise on qubit systems through the use of a numerically optimized, multi-state Markovian fluctuator. This ability to rapidly simulate the noisy qubit evolution allows us to compute control sequences capable of maximally decoupling the qubit from the noise source. We then introduce the second characterization procedure of the these, showing that a single measurable and controllable qubit may act as a spectrometer of dephasing noise. We show that the formalism of dynamical decoupling can be used to estimate the short-time correlation function of the noise source, while long time correlations may be estimated by a very simple series of free evolution experiments. This technique is applicable to the wide range of physical implementations which suffer from dephasing noise.The final part of this thesis demonstrates that trapped neutral atoms may be utilized for the robust simulation of complex systems exhibiting a topological phase. We present a method to simulate the toric code Hamiltonian stroboscopically, and demonstrate that our technique preserves the ground state degeneracy . Furthermore, we introduce a dissipative mechanism allowing for thermalization of the system to a finite temperature or direct cooling to the ground state manifold.
Since no physical system can ever be completely isolated from its environment, the study of open quantum systems is pivotal to reliably and accurately control complex quantum systems. In practice, reliability of the control field needs to be confirmed via certification of the target evolution while accuracy requires the derivation of high-fidelity control schemes in the presence of decoherence. In the first part of this thesis an algebraic framework is presented that allows to determine the minimal requirements on the unique characterisation of arbitrary unitary gates in open quantum systems, independent on the particular physical implementation of the employed quantum device. To this end, a set of theorems is devised that can be used to assess whether a given set of input states on a quantum channel is sufficient to judge whether a desired unitary gate is realised. This allows to determine the minimal input for such a task, which proves to be, quite remarkably, independent of system size. These results allow to elucidate the fundamental limits regarding certification and tomography of open quantum systems. The combination of these insights with state-of-the-art Monte Carlo process certification techniques permits a significant improvement of the scaling when certifying arbitrary unitary gates. This improvement is not only restricted to quantum information devices where the basic information carrier is the qubit but it also extends to systems where the fundamental informational entities can be of arbitary dimensionality, the so-called qudits. The second part of this thesis concerns the impact of these findings from the point of view of Optimal Control Theory (OCT). OCT for quantum systems utilises concepts from engineering such as feedback and optimisation to engineer constructive and destructive interferences in order to steer a physical process in a desired direction. It turns out that the aforementioned mathematical findings allow to deduce novel optimisation functionals that significantly reduce not only the required memory for numerical control algorithms but also the total CPU time required to obtain a certain fidelity for the optimised process. The thesis concludes by discussing two problems of fundamental interest in quantum information processing from the point of view of optimal control the preparation of pure states and the implementation of unitary gates in open quantum systems. For both cases specific physical examples are considered: for the former the vibrational cooling of molecules via optical pumping and for the latter a superconducting phase qudit implementation. In particular, it is illustrated how features of the environment can be exploited to reach the desired targets.
A quantum system that has interaction with external resources, such as probability distribution, dissipation, and noise, is referred to as an open quantum system. Not only do open quantum systems play a vital role in the field of quantum physics, but they are also fundamental objects in quantum information and quantum computing. In this thesis, we focus on computational problems related to open quantum systems. In particular, we study efficient constructions of open quantum systems and their algorithmic applications. \n \nA unitary 2-design is a quantum analogue of universal 2-hash functions. It is an example of open quantum systems in the sense that it is a probability distribution of unitaries. As unitary 2-designs inherit many properties of the Haar randomness on the unitary group, they have many applications in quantum information, such as benchmarking and decoupling. We study the structures of unitary 2-designs and present efficient methods for their constructions. \n \nThe continuous-time evolution of a closed quantum system can be described by the Schrödinger equation. A natural generalization of the Schrödinger equation to Markovian open quantum systems, in the sense of generating dynamical semigroups, is called the Lindblad equation. We show that it is impossible for a simple reductionist approach to simulate Lindblad evolution with gate complexity that has linear dependence in evolution time. Moreover, we use a novel variation of the "linear combination of unitaries" construction that pertains to quantum channels to achieve the desired linear dependence in evolution time and poly-logarithmic dependence in precision. \n \nOpen quantum systems can also be used as building blocks of quantum algorithms. We present a dissipative query model, which is based on the amplitude damping process. With this dissipative query model, we provide a quantum algorithm that performs a fixed-point quantum search while preserving the quadratic speedup against classical algorithms.