Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Thickness dependent surface plasmon of silver film detected by nitrogen vacancy centers in diamond

Dengfeng Li, Cuihong Li, Lei‐Ming Zhou, Yu Zheng, Bo-Wen Zhao, Shen Li, Nan Zhao, Xiang-Dong Chen, Guang‐Can Guo, Fang‐Wen Sun

Published Nov 8, 2018• 7 citations
Publisher

Abstract

Precise detection of surface plasmons is crucial for the research of nanophotonics and quantum optics. In this Letter, we used a single nitrogen vacancy center in diamond as a probe to detect the surface plasmon that was tuned by the thickness of a metallic film. The fluorescence intensity and lifetime of the nitrogen vacancy (NV) center were measured to obtain the information of local light-matter interaction. A nonlinear thickness dependent change of the surface plasmon was observed, with the maximum at the thickness of approximately 30 nm. With optimized thickness of silver film, the fluorescence intensity of a single NV center was enhanced 2.6 times, and the lifetime was reduced by a factor of 3, without affecting the coherence time of the NV spin state. The results proved that this system can quantitatively detect the light-matter interaction at nanoscale, and it provides an approach to enhance the fluorescence intensity of a quantum emitter.

DOI
10.1364/ol.43.005587

Related papers

Purcell effect of nitrogen-vacancy centers in nanodiamond coupled to propagating and localized surface plasmons revealed by photon-correlation cathodoluminescence

Sotatsu Yanagimoto, Naoki Yamamoto, Takumi Sannomiya +1 more

We measured the second-order correlation function of the cathodoluminescence intensity and investigated the Purcell effect by comparing the lifetimes of quantum emitters with and without metal structure. The increase in the electromagnetic local density of state due to the coupling of a quantum emitter with a plasmonic structure causes a shortening of the emitter lifetime. Since the plasmon-enhanced electric field is confined well below the wavelength of light, the quantum emitter lifetime is changed in the nanoscale range. In this study, we combined cathodoluminescence in scanning (transmission) electron microscopy with Hanbury Brown--Twiss interferometry to measure the Purcell effect with nanometer and nanosecond resolutions. We used nitrogen-vacancy centers contained in nanodiamonds as the emitters and compared their lifetime in different environments: on a thin $\mathrm{Si}{\mathrm{O}}_{2}$ membrane, on a thick flat silver film, and embedded in a silver film. The lifetime reductions of nitrogen-vacancy centers were observed in the samples with silver. We evaluated the lifetime by analytical calculation and numerical simulations and revealed the Purcell effects of emitters coupled to the propagating and localized surface plasmons.

arXiv:2012.11224•Physical review. B./Physical review. B•May 14, 2021•35 citations

Fluorescence Response of Nitrogen-Vacancy Centers in Diamond on Tapered Optical Fiber Tips Decorated with Silver Nanoparticles

Qiao Yang, Xin Tan, Wenwang Zheng +3 more

Nitrogen-vacancy (NV) color centers in diamond are a promising solid-state quantum sensing platform, but their fluorescence collection is severely constrained by the high refractive index of diamond ([Formula: see text]), which causes strong total internal reflection at the diamond-air interface and limits the signal-to-noise ratio for practical applications. Here we report the fluorescence response of a tapered optical-fiber probe comprising a CVD-grown nitrogen-doped polycrystalline diamond film and self-assembled silver nanoparticles (Ag NPs). A large-angle tapered tip ([Formula: see text]20[Formula: see text], [Formula: see text]370[Formula: see text][Formula: see text]m long) is fabricated by hydrofluoric-acid wet etching; an in situ nitrogen-doped diamond thin film is grown by microwave plasma CVD; and a 15[Formula: see text]nm Ag film is deposited by sputtering and annealed at 350[Formula: see text]C for 10[Formula: see text]min to dewet into a dense array of Ag NPs. A fused-silica witness sample prepared under the same Ag deposition and annealing conditions exhibits a broad absorption band that covers the 532[Formula: see text]nm excitation line and extends through the 637[Formula: see text]nm zero-phonon line into the NV emission region. Steady-state photoluminescence measurements show an approximately 1.51-fold increase in the detected NV fluorescence intensity at 637[Formula: see text]nm after Ag-NP processing. Time-correlated single-photon counting reveals that the intensity-weighted mean fluorescence lifetime changes from [Formula: see text][Formula: see text]ns (bare diamond) to 9.48[Formula: see text]±[Formula: see text]0.86[Formula: see text]ns (Ag NPs/diamond) across eight independent probes, corresponding to a lifetime-derived total decay-rate enhancement factor [Formula: see text]. Together, the paired measurements show increased detected brightness and faster total decay; however, the radiative and non-radiative contributions remain unresolved, which prohibits exclusive attribution of the observed variations to plasmonic NP effects. The fabrication route provides a fiber-integrated platform for further optical characterization.

NANO•Sep 11, 2026•0 citations

Enhanced Photoluminescence of Single-Photon Emitters in Nanodiamonds on a Gold Film

Yingzhi Chi, Gengxu Chen, Fedor Jelezko +2 more

Engineering the photo-emission characteristics of single-photon emitters is crucial for the growing field of quantum technologies. We show that the photoluminescence of a single nitrogen-vacancy color center in nanodiamond could be significantly enhanced when attached to a gold film of 50 nm with preserving photophysical properties as a single photon source. The nitrogen-vacancy center on the gold film showed a decreased excited-state lifetime and a modified saturation characteristic. The photoluminescence enhancement was due to the enhanced electric field by the surface plasmon and the energy transfer from the excited state of nitrogen-vacancy centers to the surface plasmon.

IEEE Photonics Technology Letters•Jan 17, 2011•35 citations

Optical depth localization of nitrogen-vacancy centers in diamond with nanometer accuracy

Andreas J. Häußler, Pascal Heller, Liam Paul McGuinness +2 more

Precise positioning of nitrogen-vacancy (NV) centers is crucial for their application in sensing and quantum information. Here we present a new purely optical technique enabling determination of the NV position with nanometer resolution. We use a confocal microscope to determine the position of individual emitters along the optical axis. Using two separate detection channels, it is possible to simultaneously measure reflected light from the diamond surface and fluorescent light from the NV center and statistically evaluate both signals. An accuracy of 2.6 nm for shallow NV centers was achieved and is consistent with other techniques for depth determination.

Optics Express•Nov 24, 2014•16 citations

Plasmon-enhanced sensitivity of spin-based sensors based on a diamond ensemble of nitrogen vacancy color centers

Hao Guo, Yulei Chen, Wu Da-Jin +6 more

A method for enhancement of the sensitivity of a spin sensor based on an ensemble of nitrogen vacancy (NV) color centers was demonstrated. Gold nanoparticles (NPs) were deposited on the bulk diamond, which had NV centers distributed on its surface. The experimental results demonstrate that, when using this simple method, plasmon enhancement of the deposited gold NPs produces an improvement of ∼10 times in the quantum efficiency and has also improved the signal-to-noise ratio by approximately ∼2.5 times. It was also shown that more electrons participated in the spin sensing process, leading to an improvement in the sensitivity of approximately seven times; this has been proved by Rabi oscillation and optical detection of magnetic resonance (ODMR) measurements. The proposed method has proved to be a more efficient way to design an ensemble of NV centers-based sensors; because the result increases in the number of NV centers, the quantum efficiency and the contrast ratio could greatly increase the device's sensitivity.

Optics Letters•Jan 17, 2017•28 citations

Near-surface Nitrogen Vacancy Centers in Diamond

Shanying Cui

The nitrogen-vacancy (NV) center is a point defect in diamond and has been championed as a promising solid-state "artificial atom." NV center properties such as its bright luminescence, room-temperature optical readout of spin states, and long spin decoherence lifetime make it an excellent system for applications in quantum information processing, high sensitivity magnetometry, and biotagging. In all applications, near-surface NVs are desirable. However, it has been found that the favorable properties of the NV center are significantly diminished as the NV center nears the surface. \nThis dissertation presents efforts in understanding the effect of the surface on the luminescence of NV centers less than a wavelength of light from the surface. We use plasma assisted etching to, independently, change the surface termination and bring the NV closer to the surface. We find that treating the surface with CF4 plasma results in a deposited polymerous fluorocarbon which helps stabilize nearby NVs. We propose using a downstream etcher to bring NVs closer to the surface, while minimizing damage and maintaining NV luminescence. Finally, we enhance emission of these near-surface NVs by coupling them into a hybrid diamond plasmonic cavity. The fabricated devices result in a measured Q of 170, higher than other previously fabricated diamond plasmonic devices.

•Oct 21, 2014•4 citations
Precise detection of surface plasmons is crucial for the research of nanophotonics and quantum optics. In this Letter, we used a single nitrogen vacancy center in diamond as a probe to detect the surface plasmon that was tuned by the thickness of a metallic film. The fluorescence intensity and lifetime of the nitrogen vacancy (NV) center were measured to obtain the information of local light-matter interaction. A nonlinear thickness dependent change of the surface plasmon was observed, with the maximum at the thickness of approximately 30 nm. With optimized thickness of silver film, the fluorescence intensity of a single NV center was enhanced 2.6 times, and the lifetime was reduced by a factor of 3, without affecting the coherence time of the NV spin state. The results proved that this system can quantitatively detect the light-matter interaction at nanoscale, and it provides an approach to enhance the fluorescence intensity of a quantum emitter.
We measured the second-order correlation function of the cathodoluminescence intensity and investigated the Purcell effect by comparing the lifetimes of quantum emitters with and without metal structure. The increase in the electromagnetic local density of state due to the coupling of a quantum emitter with a plasmonic structure causes a shortening of the emitter lifetime. Since the plasmon-enhanced electric field is confined well below the wavelength of light, the quantum emitter lifetime is changed in the nanoscale range. In this study, we combined cathodoluminescence in scanning (transmission) electron microscopy with Hanbury Brown--Twiss interferometry to measure the Purcell effect with nanometer and nanosecond resolutions. We used nitrogen-vacancy centers contained in nanodiamonds as the emitters and compared their lifetime in different environments: on a thin SiO2\mathrm{Si}{\mathrm{O}}_{2}SiO2​ membrane, on a thick flat silver film, and embedded in a silver film. The lifetime reductions of nitrogen-vacancy centers were observed in the samples with silver. We evaluated the lifetime by analytical calculation and numerical simulations and revealed the Purcell effects of emitters coupled to the propagating and localized surface plasmons.
Nitrogen-vacancy (NV) color centers in diamond are a promising solid-state quantum sensing platform, but their fluorescence collection is severely constrained by the high refractive index of diamond ([Formula: see text]), which causes strong total internal reflection at the diamond-air interface and limits the signal-to-noise ratio for practical applications. Here we report the fluorescence response of a tapered optical-fiber probe comprising a CVD-grown nitrogen-doped polycrystalline diamond film and self-assembled silver nanoparticles (Ag NPs). A large-angle tapered tip ([Formula: see text]20[Formula: see text], [Formula: see text]370[Formula: see text][Formula: see text]m long) is fabricated by hydrofluoric-acid wet etching; an in situ nitrogen-doped diamond thin film is grown by microwave plasma CVD; and a 15[Formula: see text]nm Ag film is deposited by sputtering and annealed at 350[Formula: see text]C for 10[Formula: see text]min to dewet into a dense array of Ag NPs. A fused-silica witness sample prepared under the same Ag deposition and annealing conditions exhibits a broad absorption band that covers the 532[Formula: see text]nm excitation line and extends through the 637[Formula: see text]nm zero-phonon line into the NV emission region. Steady-state photoluminescence measurements show an approximately 1.51-fold increase in the detected NV fluorescence intensity at 637[Formula: see text]nm after Ag-NP processing. Time-correlated single-photon counting reveals that the intensity-weighted mean fluorescence lifetime changes from [Formula: see text][Formula: see text]ns (bare diamond) to 9.48[Formula: see text]±[Formula: see text]0.86[Formula: see text]ns (Ag NPs/diamond) across eight independent probes, corresponding to a lifetime-derived total decay-rate enhancement factor [Formula: see text]. Together, the paired measurements show increased detected brightness and faster total decay; however, the radiative and non-radiative contributions remain unresolved, which prohibits exclusive attribution of the observed variations to plasmonic NP effects. The fabrication route provides a fiber-integrated platform for further optical characterization.
Engineering the photo-emission characteristics of single-photon emitters is crucial for the growing field of quantum technologies. We show that the photoluminescence of a single nitrogen-vacancy color center in nanodiamond could be significantly enhanced when attached to a gold film of 50 nm with preserving photophysical properties as a single photon source. The nitrogen-vacancy center on the gold film showed a decreased excited-state lifetime and a modified saturation characteristic. The photoluminescence enhancement was due to the enhanced electric field by the surface plasmon and the energy transfer from the excited state of nitrogen-vacancy centers to the surface plasmon.
Precise positioning of nitrogen-vacancy (NV) centers is crucial for their application in sensing and quantum information. Here we present a new purely optical technique enabling determination of the NV position with nanometer resolution. We use a confocal microscope to determine the position of individual emitters along the optical axis. Using two separate detection channels, it is possible to simultaneously measure reflected light from the diamond surface and fluorescent light from the NV center and statistically evaluate both signals. An accuracy of 2.6 nm for shallow NV centers was achieved and is consistent with other techniques for depth determination.
A method for enhancement of the sensitivity of a spin sensor based on an ensemble of nitrogen vacancy (NV) color centers was demonstrated. Gold nanoparticles (NPs) were deposited on the bulk diamond, which had NV centers distributed on its surface. The experimental results demonstrate that, when using this simple method, plasmon enhancement of the deposited gold NPs produces an improvement of ∼10 times in the quantum efficiency and has also improved the signal-to-noise ratio by approximately ∼2.5 times. It was also shown that more electrons participated in the spin sensing process, leading to an improvement in the sensitivity of approximately seven times; this has been proved by Rabi oscillation and optical detection of magnetic resonance (ODMR) measurements. The proposed method has proved to be a more efficient way to design an ensemble of NV centers-based sensors; because the result increases in the number of NV centers, the quantum efficiency and the contrast ratio could greatly increase the device's sensitivity.
The nitrogen-vacancy (NV) center is a point defect in diamond and has been championed as a promising solid-state "artificial atom." NV center properties such as its bright luminescence, room-temperature optical readout of spin states, and long spin decoherence lifetime make it an excellent system for applications in quantum information processing, high sensitivity magnetometry, and biotagging. In all applications, near-surface NVs are desirable. However, it has been found that the favorable properties of the NV center are significantly diminished as the NV center nears the surface. \nThis dissertation presents efforts in understanding the effect of the surface on the luminescence of NV centers less than a wavelength of light from the surface. We use plasma assisted etching to, independently, change the surface termination and bring the NV closer to the surface. We find that treating the surface with CF4 plasma results in a deposited polymerous fluorocarbon which helps stabilize nearby NVs. We propose using a downstream etcher to bring NVs closer to the surface, while minimizing damage and maintaining NV luminescence. Finally, we enhance emission of these near-surface NVs by coupling them into a hybrid diamond plasmonic cavity. The fabricated devices result in a measured Q of 170, higher than other previously fabricated diamond plasmonic devices.