In this paper, a "Kasli" module is presented. It is used for control of equipment used in quantum physics experiments (i.a. analog-digital and digital-analog converters, power supplies, signal generators). Kasli was built using printed circuit board technology and houses an FPGA module which controls connected devices (extensions), a clock recovery and distribution circuit which synchronizes all extensions and SFP connectors used for communication with user’s computer. A prototype was built and tested with third revision coming soon.
In this paper, a "Kasli" module is presented. It is used for control of equipment used in quantum physics experiments (i.a. analog-digital and digital-analog converters, power supplies, signal generators). Kasli was built using printed circuit board technology and houses an FPGA module which controls connected devices (extensions), a clock recovery and distribution circuit which synchronizes all extensions and SFP connectors used for communication with user’s computer. A prototype was built and tested with third revision coming soon.
Modern experiments with fundamental quantum systems - like ultracold atoms, trapped ions, and single photons - are managed by a control system formed by a number of input/output electronic channels governed by a computer. In hybrid quantum systems, where two or more quantum systems are combined and made to interact, establishing an efficient control system is particularly challenging due to the higher complexity, especially when each single quantum system is characterized by a different time scale. Here we present a new control apparatus specifically designed to efficiently manage hybrid quantum systems. The apparatus is formed by a network of fast communicating Field Programmable Gate Arrays (FPGAs), the action of which is administrated by a software. Both hardware and software share the same tree-like structure, which ensures a full scalability of the control apparatus. In the hardware, a master board acts on a number of slave boards, each of which is equipped with an FPGA that locally drives analog and digital input/output channels and radiofrequency outputs up to 400 MHz. The software is designed to be a general platform for managing both commercial and home-made instruments in a user-friendly and intuitive graphical user interface. The architecture ensures that complex control protocols can be carried out, such as performing of concurrent commands loops by acting on different channels, the generation of multi-variable error functions, and the implementation of self-optimization procedures. Although designed for managing experiments with hybrid quantum systems, in particular with atom-ion mixtures, this control apparatus can in principle be used in any experiment in atomic, molecular, and optical physics.
We have developed an electronic hardware system for the control and readout of multi-superconducting qubit devices. The hardware system is based on the design ideas of good scalability, high synchronization and low latency. The system, housed inside a VPX-6U chassis, includes multiple arbitrary-waveform generator (AWG) channels, analog-digital-converter (ADC) channels as well as direct current source channels. The system can be used for the control and readout of up to twelve superconducting transmon qubits in one chassis, and control and readout of more and more qubit can be carried out by interconnecting the chassis. By using field programmable gate array (FPGA) processors, the system incorporates three features that are specifically useful for superconducting qubit research. Firstly, qubit signals can be processed using the on-board FPGA after being acquired by ADCs, significantly reducing data processing time and data amount for storage and transmission. Secondly, different output modes, such as direct output and sequential output modes, of AWG can be implemented with pre-encoded FPGA. Thirdly, with data acquisition ADCs and controlAWGs jointly controlled by the same FPGA, the feedback latency can be reduced, and in ourtest a 178.4 ns latency time is realized. This is very useful for future quantum feedback experiments. Finally, we demonstrate the functionality of the system by applying the system to the control and readout of a 10 qubit superconducting quantum processor.
The implementation of a classical control infrastructure for large-scale quantum computers is challenging due to the need for integration and processing time, which is constrained by coherence time. We propose a cryogenic reconfigurable platform as the heart of the control infrastructure implementing the digital error-correction control loop. The platform is implemented on a field-programmable gate array (FPGA) that supports the functionality required by several qubit technologies and that can operate close to the physical qubits over a temperature range from 4 K to 300 K. This work focuses on the extensive characterization of the electronic platform over this temperature range. All major FPGA building blocks (such as look-up tables (LUTs), carry chains (CARRY4), mixed-mode clock manager (MMCM), phase-locked loop (PLL), block random access memory, and IDELAY2 (programmable delay element)) operate correctly and the logic speed is very stable. The logic speed of LUTs and CARRY4 changes less then 5%, whereas the jitter of MMCM and PLL clock managers is reduced by 20%. The stability is finally demonstrated by operating an integrated 1.2 GSa/s analog-to-digital converter (ADC) with a relatively stable performance over temperature. The ADCs effective number of bits drops from 6 to 4.5 bits when operating at 15 K.
This paper reports the development of a low-latency arbitrary waveform generator (AWG), which is suitable for the control and measurement of superconducting quantum computers. It can generate qubit control signals and measurement signals in real time. Compared with commercial AWG, our AWG has less latency and higher analog bandwidth. Compressing latency can reduce system feedback time, and higher analog bandwidth improves the system's integration by mounting more qubits on the readout line. The AWG integrates four high-speed digital-to-analog converters (DACs), phase-locked loop (PLL) circuits, field-programmable gate arrays (FPGAs), and related circuits into a standard PXI 3U board. The waveform generator module, communication interface module, clock module, and configuration module are realized utilizing the FPGA. The FPGA-based hardware architecture enables AWG to be flexibly configured to meet the various needs of quantum experiments. The four-channel AWG has a 2-GSa/s sampling rate, a 14-bit resolution, and 500 MHz bandwidth. The jitter in the AWG output waveform is approximately 3 ps; the latency of the AWG (the time from the feedback trigger received until a feedback pulse is generated) is approximately 55 ns. These designs form the basis of realizing control system for large-scale quantum computing.
In this paper, the “DiPho” (Digital Photodiode) device is described. The device is used for quick verification measurements and performance monitoring of photonic sources used in quantum physics experiments. DiPho was designed as a stack of two printed circuit boards (PCB) – one contains the detection element, a silicon PIN photodiode, and analog front-end, while the other contains the necessary digital circuitry. The core of the analog front end is a programmable-gain trans-impedance amplifier which was designed to be capable of measuring photocurrents in the range of 10μA to 10mA. DiPho provides analog measurement output via SMA connector and digital data output via USB serial interface. Moreover, support for single-pair Ethernet (SPE) communication is planned.
Basic in quantum communication and computing -- Quantum information -- Quantum communication -- Quantum protocols -- Experimental electronic requirements -- Photon detection -- Photon detection mechanisms -- Signal conversion and standardization -- The input circuit -- Information processor and applications : the FPGA -- Spartan-3 FPGA characteristics -- Other characteristics of ZestSC2 card -- Software used -- Built applications -- Outputs and control -- Electro-optic modulators -- Electric signal amplification -- The output circuit -- Results and analysis -- Input circuit -- Event frequency measurement -- Coincidence detection -- Time stamping -- Periodic signal generator -- Output circuit.