We show that detection of single photons is not subject to the fundamental limitations that accompany quantum linear amplification of bosonic mode amplitudes, even though a photodetector does amplify a few-photon input signal to a macroscopic output signal. Alternative limits are derived for nonlinear photon-number amplification with optimistic implications for single-photon detection. Our description makes clear that nonlinear amplification takes place, in general, at a different frequency $\omega'$ than the frequency $\omega$ of the input photons, which can be exploited to suppress thermal noise even further. A practical example that fits our description very well is electron shelving.
We show that detection of single photons is not subject to the fundamental limitations that accompany quantum linear amplification of bosonic mode amplitudes, even though a photodetector does amplify a few-photon input signal to a macroscopic output signal. Alternative limits are derived for nonlinear photon-number amplification with optimistic implications for single-photon detection. Our description makes clear that nonlinear amplification takes place, in general, at a different frequency ω′ than the frequency ω of the input photons, which can be exploited to suppress thermal noise even further. A practical example that fits our description very well is electron shelving.
We show that detection of single photons is not subject to the fundamental limitations that accompany quantum linear amplification of bosonic mode amplitudes, even though a photodetector does amplify a few-photon input signal to a macroscopic output signal. Alternative limits are derived for nonlinear photon-number amplification schemes with optimistic implications for single-photon detection. Four commutator-preserving transformations are presented: one idealized (which is optimal) and three more realistic (less than optimal). Our description makes clear that nonlinear amplification takes place, in general, at a different frequency ω' than the frequency ω of the input photons. This can be exploited to suppress thermal noise and dark counts past what is possible with linear amplification up to a fundamental limit imposed by nonlinear amplification into a single bosonic mode.
Quantum mechanics cements the intimate relationship between the nature of light and its detection. Historically, quantum theories of photodetection have generally fallen into two categories: the first tries to determine what quantum field observable is measured when photoelectrons are detected, laying the theoretical groundwork for photodetection being possible. The second type are phenomenological theories, which take great care to model the details of specific photodetectors. In this dissertation, we fill in the gap between these two models in the modern literature on photodetection by constructing a fully quantum-mechanical and sufficiently realistic model that includes all stages of the photodetection process. We accomplish this within the framework of quantum information theory using the language of positive operator valued measures (POVMs). \n\nA POVM provides the most general description of a quantum measurement. In the context of single-photon detection, the photodetector POVM provides a complete characterization of the single-photon detector (SPD) from which all figures of merit can be calculated. Each element of the POVM is comprised of a weighted sum over single-photon state projectors. To construct SPD POVMs, we identify the states projected onto by a measurement and the associated weights. We first accomplish this for a simple time-dependent system, laying out how to efficiently project onto arbitrary single-photon states. Then, we describe the three stages of a realistic SPD: transmission, amplification, and measurement.\n\nIn the transmission stage of photodetection a photon enters a network of discrete energy levels, its energy propagating through that network and finally exiting into another output continuum of modes, a process entirely described by a single complex function. In the amplification stage of photodetection, a single excitation is amplified into a macroscopic signal via a nonlinear amplification mechanism. In the final stage, an inefficient ``classical'' measurement is made on the macroscopic signal. By combining these three stages we form a chain of inference from the final ``click'' to the input photon and construct a POVM projecting onto the input Hilbert space. Lastly, we discuss limits and tradeoffs that arise at each stage and implications for photodetection applications.\n\nThis dissertation contains previously published and unpublished material.
Linear quantum amplifiers are indispensable tools for quantum technologies, yet their performance is fundamentally limited by quantum noise, precluding any signal-to-noise ratio (SNR) enhancement unless supplemented by post-selection or non-classical resources. To surpass this limitation, we propose a nonlinear quantum amplification strategy that exploits the interplay between a gain-stabilized bright eigenmode of a coupled two-mode bosonic system and Kerr nonlinearity. We demonstrate that this interplay enables the signal gain to surpass the noise gain in a selected quadrature, leading to a net increase in the SNR beyond the quantum limits of conventional linear amplifiers. Our work thus establishes a novel nonlinear amplification paradigm capable of enhancing the SNR, with promising applications across quantum information processing, quantum communications, and quantum metrology.
Single photon detection generally consists of several stages: the photon has to interact with one or more charged particles, its excitation energy will be converted into other forms of energy, and amplification to a macroscopic signal must occur, thus leading to a ``click.'' We focus here on the part of the detection process before amplification (which we have studied in a separate publication). We discuss how networks consisting of coupled discrete quantum states and structured continua (e.g., band gaps) provide generic models for that first part of the detection process. The input to the network is a single continuum (the continuum of single photon states); the output is again a single continuum describing the next irreversible step. The process of a single photon entering the network, its energy propagating through that network, and finally exiting into another output continuum of modes can be described by a single dimensionless complex transmission amplitude, $T(\ensuremath{\omega})$. We discuss how to obtain from $T(\ensuremath{\omega})$ the photodetection efficiency, how to find sets of parameters that maximize this efficiency, as well as expressions for other input-independent quantities such as the frequency-dependent group delay and spectral bandwidth. We then study a variety of networks, discuss how to engineer different transmission functions $T(\ensuremath{\omega})$ amenable to photodetection, and discuss implications for single photon detection technology.
We show that a saturable amplifier can beat the "3 dB" quantum noise figure of linear amplifiers, approaching the ideal "0 dB" Heisenberg limit. Noise suppression is due to nonlinear saturation effects which cut off the high-intensity tail of the photon distribution. A Monte Carlo simulation of an actual semiconductor laser amplifier leads to a minimum noise figure of 0.51 dB, with a still sizable gain of 10.8 dB. The best performance corresponds to an output signal photon number which equals 0.7 times the saturation number.
In optical quantum information processing, two of the most basic elements are the sources of quantum mechanical states of light, and the devices that can detect these states. In this chapter, we narrow this down to photon sources and photodetectors. We will describe first how detectors work, starting from abstract ideal detectors, via a complete description of realistic detectors in terms of POVMS, to a brief overview of current photodetectors. Subsequently, we will define what is a single-photon source, and how we can determine experimentally whether a source produces single photons or something else. Having laid down the ground rules, we will survey some of the most popular ways photons are produced in the laboratory. Finally, we take a look at the production of entangled photon sources and quantum non-demolition measurements of photons. A mathematical model of photodetectors Photodetectors are devices that produce a macroscopic signal when triggered by one or more photons. In the ideal situation, every photon that hits the detector contributes to the macroscopic signal, and there are no ‘ghost’ signals, or so-called dark counts. In this situation we can define two types of detector, namely the ‘photon-number detector’, and ‘detectors without number resolution’. First, the photon number detector is a (largely hypothetical) device that tells us how many photons there are in a given optical mode that is properly localized in space and time. This property is called ‘photon-number resolution’.