We propose an augmented belief propagation (BP) decoder for low-density parity check (LDPC) codes which can be utilized on memoryless or intersymbol interference channels. The proposed method is a heuristic algorithm that eliminates a large number of pseudocodewords that can cause nonconvergence in the BP decoder. The augmented decoder is a multistage iterative decoder, where, at each stage, the original channel messages on select symbol nodes are replaced by saturated messages. The key element of the proposed method is the symbol selection process, which is based on the appropriately defined subgraphs of the code graph and/or the reliability of the information received from the channel. We demonstrate by examples that this decoder can be implemented to achieve substantial gains (compared to the standard locally-operating BP decoder) for short LDPC codes decoded on both memoryless and intersymbol interference Gaussian channels. Using the Margulis code example, we also show that the augmented decoder reduces the error floors. Finally, we discuss types of BP decoding errors and relate them to the augmented BP decoder.
We propose an augmented belief-propagation (BP) decoder for low-density parity-check (LDPC) codes which can be used on memoryless or intersymbol-interference (ISI) channels. The proposed method is a heuristic algorithm that eliminates a large number of pseudocodewords that can cause nonconvergence in the BP decoder. The augmented decoder is a multistage iterative decoder, where at each stage, the original channel messages on select symbol nodes are replaced by saturated messages. The key element of the proposed method is the symbol-selection process, which is based on the appropriately defined subgraphs of the code graph and/or the reliability of the information received from the channel. We demonstrate by examples that this decoder can be implemented to achieve substantial gains (compared with the standard locally operating BP decoder) for short LDPC codes decoded on both memoryless and ISI Gaussian channels. Using the Margulis code example, we also show that the augmented decoder reduces the error floors. Finally, we discuss types of BP decoding errors and relate them to the augmented BP decoder.
A two stage belief-propagation(TSBP) decoding algorithm was developed based on trapping set state(TSS) detection to reduce the error floor of low-density parity-check(LDPC) codes.The algorithm uses belief-propagation algorithm until the TSS is detected,then iterative decoding is attempted to continue through flipping and augmenting the initial values of the possible error bits until the decoding succeeds or the maximum number of attempts is reached.Simulations show that the algorithm significantly reduces the maximum number of iterations for decoding in the error floor region,and with a few additional attempts,the error floor of LDPC codes can be reduced by nearly two orders of magnitude.
Quantum low-density parity-check codes can be decoded using a syndrome based GF(4) belief propagation decoder (where GF denotes Galois field). However, the performance of this decoder is limited both by unavoidable 4-cycles in the code's factor graph and the degenerate nature of quantum errors. For the subclass of CSS codes, the number of 4-cycles can be reduced by breaking an error into an
X and
Z component and decoding each with an individual
GF(2) based decoder. However, this comes at the expense of ignoring potential correlations between these two error components. We present a number of modified belief propagation decoders that address these issues. We propose a
GF(2) based decoder for CSS codes that reintroduces error correlations by reattempting decoding with adjusted error probabilities. We also propose the use of an augmented decoder, which has previously been suggested for classical binary low-density parity-check codes. This decoder iteratively reattempts decoding on factor graphs that have a subset of their check nodes duplicated. The augmented decoder can be based on a
GF(4) decoder for any code, a
GF(2) decoder for CSS code, or even a supernode decoder for a dual-containing CSS code. For CSS codes, we further propose a
GF(2) based decoder that combines the augmented decoder with error probability adjustment. We demonstrate the performance of these new decoders on a range of different codes, showing that they perform favorably compared to other decoders presented in literature.
At the heart of modern coding theory lies the fact that low-density parity-check (LDPC) codes can be efficiently decoded by belief propagation (BP). The BP is an inference algorithm which operates on a graphical model of a code, and lends itself to low-complexity and high-speed implementations, making it the algorithm of choice in many applications. It has unprecedentedly good error rate performance, so good that when decoded by the BP, LDPC codes approach theoretical limits of channel capacity. However, this capacity approaching property holds only in the asymptotic limit of code length, while codes of practical lengths suffer abrupt performance degradation in the low noise regime known as the error floor phenomenon. Our study of error floor has led to an interesting and surprising finding that it is possible to design iterative decoders which are much simpler yet better than belief propagation! These decoders do not propagate beliefs but a rather different kind of messages that reflect the local structure of the code graph. This has opened a plethora of exciting theoretical problems and applications. This paper introduces this new paradigm.
Abstract Quantum error-correction codes are immeasurable resources for quantum computing and quantum communication. However, the existing decoders are generally incapable of checking node duplication of belief propagation (BP) on quantum low-density parity check (QLDPC) codes. Based on the probability theory in the machine learning, mathematical statistics and topological structure, a GF(4) (the Galois field is abbreviated as GF) augmented model BP decoder with Tanner graph is designed. The problem of repeated check nodes can be solved by this decoder. In simulation, when the random perturbation strength p=0.0115–0.0116 and number of attempts N = 60–70, the highest decoding efficiency of the augmented model BP decoder is obtained, and the low-loss frame error rate (FER) decreases to 7.1975 ×10−5. Hence, we design a novel augmented model decoder to compare the relationship between GF(2) and GF(4) for quantum code [[450,200]] on the depolarization channel. It can be verified that the proposed decoder provides the widely application range, and the decoding performance is better in QLDPC codes.