Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fiber-taper collected photoluminescence characterization of diamond microdisks

Tamiko Masuda

Published May 15, 2018• 0 citations
Publisher

Abstract

A key architectural element of future quantum photonic networks is an efficient light-matter interface to connect electronic and photonic qubit systems. Nanophotonic resonators can be fabricated on-chip to provide such interfaces for atomic-like defect centers in diamond, which are leading qubit candidates. Fabrication advancements have recently lead to the construction of high quality diamond microdisk resonators, which show potential to reach enhancements with Purcell factor CNV ∼ 50. Here, a room-temperature experimental apparatus integrating free space and visible wavelength fiber-taper measurement capabilities is built to characterize diamond microdisk resonators. Using this setup, microdisk wisphering gallery modes with quality factors at visible wavelengths resonant with defect centers as high as Q ∼ 1 × 105, are observed for the first time. Spectral filtering effects of the taper on the microdisk are analysed to reveal that coupling to these disks may be limited by phase matching requirements. By thinning these disks it should be possible to improve coupling while lowering mode volumes, as desired to optimize Purcell factors.

DOI
10.11575/prism/31924

Related papers

Fiber-taper collected emission from NV centers in high-Q/V diamond microdisks

Tamiko Masuda, John Patrick Hadden, David P. Lake +3 more

Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ( V ) of each cavity mode, the cavity quality factor ( Q ), and the coupling between the microdisk and the fiber. Here we observe room temperature photoluminescence from an ensemble of nitrogen-vacancy centers into high Q / V microdisk modes, which when combined with coherent spectroscopy of the microdisk modes, allows us to elucidate the relative contributions of these factors. The broad emission spectrum acts as an internal light source facilitating mode identification over several cavity free spectral ranges. Analysis of the fiber taper collected microdisk emission reveals spectral filtering both by the cavity and the fiber taper, the latter of which we find preferentially couples to higher-order microdisk modes. Coherent mode spectroscopy is used to measure Q ∼ 1 × 10 5 – the highest reported values for diamond microcavities operating at visible wavelengths. With realistic optimization of the microdisk dimensions, we predict that Purcell factors of ∼50 are within reach.

arXiv:2310.04487•Optics Express•Dec 4, 2023•14 citations

Adiabatic optical fiber coupling for diamond quantum nanophotonic devices

K. Aoyama, M. Kamata, S. Hachuda +14 more

Efficient and stable interfaces between quantum devices and optical fibers are a key requirement for realizing large-scale quantum networks and distributed quantum computing. Adiabatic coupling between a diamond waveguide and a tapered fiber provides a promising route to broadband, efficient, and robust optical coupling [*]. In this work, we present the design, fabrication, and characterization of such interface. First, we performed FDTD simulations to optimize the diamond nanobeam geometry. These simulations predict a maximum coupling efficiency of 98% with an optimized design. Next, tapered optical fibers with angles <3° and tips <150 nm were fabricated using an optimized hydrofluoric acid etching process. Finally, we experimentally evaluated the coupling efficiency by measuring photoluminescence from nitrogen-vacancy centers in a diamond nanobeam through the fiber, yielding an efficiency of 14%. These results establish a clear design path for a practical interface. The gap between simulation and experiment highlights the need to improve physical contact and nanobeam fabrication. Future work will target these optimizations to realize a more efficient and robust packaged device, a critical component for quantum networks.

•Oct 10, 2025•0 citations

Fiber-Coupled Diamond Micro-Waveguides toward an Efficient Quantum Interface for Spin Defect Centers

Masazumi Fujiwara, Oliver Neitzke, Tim Schröder +8 more

We report the direct integration and efficient coupling of nitrogen vacancy (NV) color centers in diamond nanophotonic structures into a fiber-based photonic architecture at cryogenic temperatures. NV centers are embedded in diamond micro-waveguides (μWGs), which are coupled to fiber tapers. Fiber tapers have low-loss connection to single-mode optical fibers and hence enable efficient integration of NV centers into optical fiber networks. We numerically optimize the parameters of the μWG-fiber-taper devices designed particularly for use in cryogenic experiments, resulting in 35.6% coupling efficiency, and experimentally demonstrate cooling of these devices to the liquid helium temperature of 4.2 K without loss of the fiber transmission. We observe sharp zero-phonon lines in the fluorescence of NV centers through the pigtailed fibers at 100 K. The optimized devices with high photon coupling efficiency and the demonstration of cooling to cryogenic temperatures are an important step to realize fiber-based quantum nanophotonic interfaces using diamond spin defect centers.

ACS Omega•Oct 26, 2017•14 citations

A vertically-loaded diamond microdisk resonator spin-photon interface

Yuqin Duan, Kevin C. Chen, Dirk Robert Englund +1 more

We propose and optimize a vertically-loaded diamond microdisk resonator (VLDMoRt) coupled to a nitrogen-vacancy (NV) center in diamond for efficient collection of zero-phonon-line emission into low numerical aperture (NA) free-space modes. The VLDMoRt achieves a Purcell enhancement of 172 with 39% of the emitted light collected within a NA of 0.6, leading to a total external spin-photon collection efficiency of 0.33. As the design is compatible with established nanofabrication techniques and couples to low-NA modes accessible by cryogenic free-space optical systems, it is a promising platform for efficient spin-photon interfaces based on diamond quantum emitters.

arXiv:2105.05695•Optics Express•Nov 25, 2021•15 citations

Saturable absorption in defect-rich diamond nanophotonics

Christopher Coutts, Nicholas J. Sorensen, Elham Zohari +3 more

Diamond is a leading quantum photonics platform due to its ability to host qubits based on crystal defects such as nitrogen-vacancy centres. Fabricating nanophotonic devices from defect-rich diamond, which underpins many quantum sensing technologies, promises enhanced performance and integrability of diamond quantum sensors. Here we demonstrate microdisk cavities fabricated from defect-rich diamond that support optical modes with high quality factor (${Q}\sim7\times10^4$ at $1042\,$nm) and show that they exhibit saturable absorption. Power-dependent spectroscopy measurements spanning 979$\,$nm to 1604$\,$nm are used to observe intensity-dependent cavity loss and extract wavelength-dependent absorption coefficients and saturation intensities. At 1047$\,$nm, we observe saturation and measure a saturation intensity of $2.1\,(8)\,$MW/cm$^2$ and an absorption coefficient of $0.53\,(2)\,$cm$^{-1}$. These results provide insight into defect-mediated optical loss in diamond nanophotonics and suggest strategies to harness defect-induced nonlinearities in future diamond photonic devices.

physics.opticsCross-listedarXiv:2603.11367•Optica•Mar 13, 2026•1 citation

Fiber-integrated nanophotonic networks in bulk single-crystal diamond substrates (Conference Presentation)

Michael J. Burek, Charles Meuwly, Jake Rochman +3 more

Luminescent lattice defects (so called “color centers”) in diamond provide a robust, solid-state architecture for exploring quantum optics, with many facilitating direct access to highly coherent electron and nuclear spins. The past two decades have seen tremendous advances in our ability to prepare and control the quantum states of these atom-like systems. For instance, demonstrations that leverage the diamond nitrogen vacancy (NV–) center as a spin-photon interface have included the generation of indistinguishable photons, a quantum bit memory exceeding 1 second, entanglement of two distance solid-state qubits, and deterministic long distance quantum teleportation. While diamond color centers are an attractive platform for scalable quantum information processing, the diamond solid-state matrix, by its very nature, inhibits efficient photon collection into either free-space or fiber-optical systems. Due to its large refractive index, emitted photons are inevitably trapped within the diamond crystal by total internal reflection, limiting count rates and overall scalability of information processing via quantum optical protocols. To this end, there has been significant progress towards integrating individual diamond color centers within well-defined radiation channels: namely, those provided by monolithic diamond nanophotonic networks. Currently, on-chip low loss (~ few db/cm) diamond waveguide networks are available, as well as key passive photonic elements like micron scale ring and disk resonators and photonic crystal cavities, with high optical quality (Q) factors. Specifically, we recently demonstrated a scalable ‘angled-etching’ nanofabrication method for realizing nanophotonic networks starting from bulk single-crystal diamond substrates (MJ Burek et al., Nano Letters 2012, MJ Burek et al., Nat Comm. 2014). Angled-etching employs anisotropic oxygen-based plasma etching at an oblique angle to the substrate surface, resulting in suspended optical structures with triangular cross-sections. Using this approach, we demonstrated high Q-factor (> 10^5) optical nanocavities fabricated in bulk single-crystal diamond, operating over a wide wavelength range (visible to telecom). Beyond isolated photonic devices, we have further developed free-standing angled-etched waveguides which efficiently route photons between diamond optical nanocavities, while maintaining physical support through attachment to the bulk substrate. Although on-chip diamond nanophotonics realized by angled-etching continue to mature, efficient off-chip optical coupling schemes which provide near seamless transition of photons on-chip into commercial optical fibers remain an outstanding challenge. This is especially pertinent in applications involving single photons, such as quantum optics with diamond color centers. Herein, we demonstrate a high efficiency fiber-optical interface with aforementioned on-chip diamond nanophotonic networks, achieving > 90% power coupling at both telecom and visible wavelengths. The coupling scheme utilizes a single mode optical fiber, with one end fabricated into a conical taper, to adiabatically transition guided light between on-chip tapered diamond waveguides and off-chip optical fiber networks. Additionally, we develop techniques to robustly pigtail single-mode fibers with diamond waveguide couplers, yielding a packaged technology that may potentially enable deployment in harsh environments, including vacuum, sub-Kelvin cryogenics, or even liquid/biological environments. With these newly developed optical integration schemes, single-crystal diamond is now a viable integrated nanophotonics platform, servicing a range of applications, from non-linear optics and chemical sensing, to quantum science and cavity optomechanics.

SPIE Nanophotonics•Jul 26, 2016•0 citations
A key architectural element of future quantum photonic networks is an efficient light-matter interface to connect electronic and photonic qubit systems. Nanophotonic resonators can be fabricated on-chip to provide such interfaces for atomic-like defect centers in diamond, which are leading qubit candidates. Fabrication advancements have recently lead to the construction of high quality diamond microdisk resonators, which show potential to reach enhancements with Purcell factor CNV ∼ 50. Here, a room-temperature experimental apparatus integrating free space and visible wavelength fiber-taper measurement capabilities is built to characterize diamond microdisk resonators. Using this setup, microdisk wisphering gallery modes with quality factors at visible wavelengths resonant with defect centers as high as Q ∼ 1 × 105, are observed for the first time. Spectral filtering effects of the taper on the microdisk are analysed to reveal that coupling to these disks may be limited by phase matching requirements. By thinning these disks it should be possible to improve coupling while lowering mode volumes, as desired to optimize Purcell factors.
Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ( V ) of each cavity mode, the cavity quality factor ( Q ), and the coupling between the microdisk and the fiber. Here we observe room temperature photoluminescence from an ensemble of nitrogen-vacancy centers into high Q / V microdisk modes, which when combined with coherent spectroscopy of the microdisk modes, allows us to elucidate the relative contributions of these factors. The broad emission spectrum acts as an internal light source facilitating mode identification over several cavity free spectral ranges. Analysis of the fiber taper collected microdisk emission reveals spectral filtering both by the cavity and the fiber taper, the latter of which we find preferentially couples to higher-order microdisk modes. Coherent mode spectroscopy is used to measure Q ∼ 1 × 10 5 – the highest reported values for diamond microcavities operating at visible wavelengths. With realistic optimization of the microdisk dimensions, we predict that Purcell factors of ∼50 are within reach.
Efficient and stable interfaces between quantum devices and optical fibers are a key requirement for realizing large-scale quantum networks and distributed quantum computing. Adiabatic coupling between a diamond waveguide and a tapered fiber provides a promising route to broadband, efficient, and robust optical coupling [*]. In this work, we present the design, fabrication, and characterization of such interface. First, we performed FDTD simulations to optimize the diamond nanobeam geometry. These simulations predict a maximum coupling efficiency of 98% with an optimized design. Next, tapered optical fibers with angles <3° and tips <150 nm were fabricated using an optimized hydrofluoric acid etching process. Finally, we experimentally evaluated the coupling efficiency by measuring photoluminescence from nitrogen-vacancy centers in a diamond nanobeam through the fiber, yielding an efficiency of 14%. These results establish a clear design path for a practical interface. The gap between simulation and experiment highlights the need to improve physical contact and nanobeam fabrication. Future work will target these optimizations to realize a more efficient and robust packaged device, a critical component for quantum networks.
We report the direct integration and efficient coupling of nitrogen vacancy (NV) color centers in diamond nanophotonic structures into a fiber-based photonic architecture at cryogenic temperatures. NV centers are embedded in diamond micro-waveguides (μWGs), which are coupled to fiber tapers. Fiber tapers have low-loss connection to single-mode optical fibers and hence enable efficient integration of NV centers into optical fiber networks. We numerically optimize the parameters of the μWG-fiber-taper devices designed particularly for use in cryogenic experiments, resulting in 35.6% coupling efficiency, and experimentally demonstrate cooling of these devices to the liquid helium temperature of 4.2 K without loss of the fiber transmission. We observe sharp zero-phonon lines in the fluorescence of NV centers through the pigtailed fibers at 100 K. The optimized devices with high photon coupling efficiency and the demonstration of cooling to cryogenic temperatures are an important step to realize fiber-based quantum nanophotonic interfaces using diamond spin defect centers.
We propose and optimize a vertically-loaded diamond microdisk resonator (VLDMoRt) coupled to a nitrogen-vacancy (NV) center in diamond for efficient collection of zero-phonon-line emission into low numerical aperture (NA) free-space modes. The VLDMoRt achieves a Purcell enhancement of 172 with 39% of the emitted light collected within a NA of 0.6, leading to a total external spin-photon collection efficiency of 0.33. As the design is compatible with established nanofabrication techniques and couples to low-NA modes accessible by cryogenic free-space optical systems, it is a promising platform for efficient spin-photon interfaces based on diamond quantum emitters.
Diamond is a leading quantum photonics platform due to its ability to host qubits based on crystal defects such as nitrogen-vacancy centres. Fabricating nanophotonic devices from defect-rich diamond, which underpins many quantum sensing technologies, promises enhanced performance and integrability of diamond quantum sensors. Here we demonstrate microdisk cavities fabricated from defect-rich diamond that support optical modes with high quality factor (Q∼7×104{Q}\sim7\times10^4Q∼7×104 at 1042 1042\,1042nm) and show that they exhibit saturable absorption. Power-dependent spectroscopy measurements spanning 979 \,nm to 1604 \,nm are used to observe intensity-dependent cavity loss and extract wavelength-dependent absorption coefficients and saturation intensities. At 1047 \,nm, we observe saturation and measure a saturation intensity of 2.1 (8) 2.1\,(8)\,2.1(8)MW/cm2^22 and an absorption coefficient of 0.53 (2) 0.53\,(2)\,0.53(2)cm−1^{-1}−1. These results provide insight into defect-mediated optical loss in diamond nanophotonics and suggest strategies to harness defect-induced nonlinearities in future diamond photonic devices.
Luminescent lattice defects (so called “color centers”) in diamond provide a robust, solid-state architecture for exploring quantum optics, with many facilitating direct access to highly coherent electron and nuclear spins. The past two decades have seen tremendous advances in our ability to prepare and control the quantum states of these atom-like systems. For instance, demonstrations that leverage the diamond nitrogen vacancy (NV–) center as a spin-photon interface have included the generation of indistinguishable photons, a quantum bit memory exceeding 1 second, entanglement of two distance solid-state qubits, and deterministic long distance quantum teleportation. While diamond color centers are an attractive platform for scalable quantum information processing, the diamond solid-state matrix, by its very nature, inhibits efficient photon collection into either free-space or fiber-optical systems. Due to its large refractive index, emitted photons are inevitably trapped within the diamond crystal by total internal reflection, limiting count rates and overall scalability of information processing via quantum optical protocols. To this end, there has been significant progress towards integrating individual diamond color centers within well-defined radiation channels: namely, those provided by monolithic diamond nanophotonic networks. Currently, on-chip low loss (~ few db/cm) diamond waveguide networks are available, as well as key passive photonic elements like micron scale ring and disk resonators and photonic crystal cavities, with high optical quality (Q) factors. Specifically, we recently demonstrated a scalable ‘angled-etching’ nanofabrication method for realizing nanophotonic networks starting from bulk single-crystal diamond substrates (MJ Burek et al., Nano Letters 2012, MJ Burek et al., Nat Comm. 2014). Angled-etching employs anisotropic oxygen-based plasma etching at an oblique angle to the substrate surface, resulting in suspended optical structures with triangular cross-sections. Using this approach, we demonstrated high Q-factor (> 10^5) optical nanocavities fabricated in bulk single-crystal diamond, operating over a wide wavelength range (visible to telecom). Beyond isolated photonic devices, we have further developed free-standing angled-etched waveguides which efficiently route photons between diamond optical nanocavities, while maintaining physical support through attachment to the bulk substrate. Although on-chip diamond nanophotonics realized by angled-etching continue to mature, efficient off-chip optical coupling schemes which provide near seamless transition of photons on-chip into commercial optical fibers remain an outstanding challenge. This is especially pertinent in applications involving single photons, such as quantum optics with diamond color centers. Herein, we demonstrate a high efficiency fiber-optical interface with aforementioned on-chip diamond nanophotonic networks, achieving > 90% power coupling at both telecom and visible wavelengths. The coupling scheme utilizes a single mode optical fiber, with one end fabricated into a conical taper, to adiabatically transition guided light between on-chip tapered diamond waveguides and off-chip optical fiber networks. Additionally, we develop techniques to robustly pigtail single-mode fibers with diamond waveguide couplers, yielding a packaged technology that may potentially enable deployment in harsh environments, including vacuum, sub-Kelvin cryogenics, or even liquid/biological environments. With these newly developed optical integration schemes, single-crystal diamond is now a viable integrated nanophotonics platform, servicing a range of applications, from non-linear optics and chemical sensing, to quantum science and cavity optomechanics.