For the past two and a half decades, a subset of the physics community has been focused on building a new type of computer, one that exploits the superposition, interference, and entanglement of quantum states to compute faster than a classical computer on select tasks. Manipulating quantum systems requires great care, however, as they are quite sensitive to many sources of noise. Surpassing the limits of hardware fabrication and control, quantum error-correcting codes can reduce error-rates to arbitrarily low levels, albeit with some overhead. This thesis takes another look at several aspects of stabilizer code quantum error-correction to discover solutions to the practical problems of choosing a code, using it to correct errors, and performing fault-tolerant operations. Our first result looks at limitations on the simplest implementation of fault-tolerant operations, transversality. By defining a new property of stabilizer codes, the disjointness, we find transversal operations on stabilizer codes are limited to the Clifford hierarchy and thus are not universal for computation. Next, we address these limitations by designing non-transversal fault-tolerant operations that can be used to universally compute on some codes. The key idea in our constructions is that error-correction is performed at various points partway through the non-transversal operation (even at points when the code is not-necessarily still a stabilizer code) to catch errors before they spread. Since the operation is thus divided into pieces, we dub this pieceable fault-tolerance. In applying pieceable fault tolerance to the Bacon-Shor family of codes, we find an interesting tradeoff between space and time, where a fault-tolerant controlled-controlled-Z operation takes less time as the code becomes more asymmetric, eventually becoming transversal. Further, with a novel error-correction procedure designed to preserve the coherence of errors, we design a reasonably practical implementation of the controlled-controlled-Z operation on the smallest Bacon-Shor code. Our last contribution is a new family of topological quantum codes, the triangle codes, which operate within the limits of a 2-dimensional plane. These codes can perform all encoded Clifford operations within the plane. Moreover, we describe how to do the same for the popular family of surface codes, by relation to the triangle codes.
For the past two and a half decades, a subset of the physics community has been focused on building a new type of computer, one that exploits the superposition, interference, and entanglement of quantum states to compute faster than a classical computer on select tasks. Manipulating quantum systems requires great care, however, as they are quite sensitive to many sources of noise. Surpassing the limits of hardware fabrication and control, quantum error-correcting codes can reduce error-rates to arbitrarily low levels, albeit with some overhead. This thesis takes another look at several aspects of stabilizer code quantum error-correction to discover solutions to the practical problems of choosing a code, using it to correct errors, and performing fault-tolerant operations. Our first result looks at limitations on the simplest implementation of fault-tolerant operations, transversality. By defining a new property of stabilizer codes, the disjointness, we find transversal operations on stabilizer codes are limited to the Clifford hierarchy and thus are not universal for computation. Next, we address these limitations by designing non-transversal fault-tolerant operations that can be used to universally compute on some codes. The key idea in our constructions is that error-correction is performed at various points partway through the non-transversal operation (even at points when the code is not-necessarily still a stabilizer code) to catch errors before they spread. Since the operation is thus divided into pieces, we dub this pieceable fault-tolerance. In applying pieceable fault tolerance to the Bacon-Shor family of codes, we find an interesting tradeoff between space and time, where a fault-tolerant controlled-controlled-Z operation takes less time as the code becomes more asymmetric, eventually becoming transversal. Further, with a novel error-correction procedure designed to preserve the coherence of errors, we design a reasonably practical implementation of the controlled-controlled-Z operation on the smallest Bacon-Shor code. Our last contribution is a new family of topological quantum codes, the triangle codes, which operate within the limits of a 2-dimensional plane. These codes can perform all encoded Clifford operations within the plane. Moreover, we describe how to do the same for the popular family of surface codes, by relation to the triangle codes.
Quantum computers have been shown to efficiently solve a class of problems for which no efficient solution is otherwise known. Physical systems can implement quantum computation, but devising realistic schemes is an extremely challenging problem largely due to the effect of noise. A quantum computer that is capable of correctly solving problems more rapidly than modern digital computers requires some use of so-called fault-tolerant components. Code-based fault-tolerance using quantum error-correcting codes is one of the most promising and versatile of the known routes for fault-tolerant quantum computation. This dissertation presents three main, new results about code-based fault-tolerant quantum computer architectures.
The first result is a large new family of quantum codes that go beyond stabilizer codes, the most well-studied family of quantum codes. Our new family of codeword stabilized codes contains all known codes with optimal parameters. Furthermore, we show how to systematically find, construct, and understand such codes as a pair of codes: an additive quantum code and a classical (nonlinear) code.
Second, we resolve an open question about universality of so-called transversal gates acting on stabilizer codes. Such gates are universal for classical fault-tolerant computation, but they were conjectured to be insufficient for universal fault-tolerant quantum computation. We show that transversal gates have a restricted form and prove that some important families of them cannot be quantum universal. This is strong evidence that so-called quantum software is necessary to achieve universality, and, therefore, fault-tolerant quantum computer architecture is fundamentally different from classical computer architecture.
Finally, we partition the fault-tolerant design problem into levels of a hierarchy of concatenated codes and present methods, compatible with rigorous threshold theorems, for numerically evaluating these codes. The methods are applied to measure inner error-correcting code performance, as a first step toward elucidation of an effective fault-tolerant quantum computer architecture that uses no more than a physical, inner, and outer level of coding. Of the inner codes, the Golay code gives the highest pseudothreshold of 2 × 10-3. A comparison of logical error rate and overhead shows that the Bacon-Shor codes are competitive with Knill's C 4/C6 scheme at a base error rate of 10 -4. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.)
Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.
Fault-tolerant quantum computation allows quantum computations to be carried out while resisting unwanted noise. Several error-correcting codes have been developed to achieve this task, but none alone are capable of transversal universal quantum computation. This universality is highly desired and often achieved using techniques such as code concatenation, code switching, magic state distillation, or pieceable fault tolerance. Existing constructions can incur substantial overhead or rely on properties specific to particular codes. This work proposes implementing logical Clifford and T gates through novel, ancilla-mediated, pieceable interactions to construct a universal fault-tolerant quantum gate set. Our construction is deterministic, does not modify the underlying data codes or registers, and is generic over all data stabilizer codes. Thus, any single code becomes capable of universal quantum computation by leveraging helper codes in ancilla registers and mid-circuit measurements. Furthermore, since these logical gates are stabilizer code-generic, these implementations enable communication between heterogeneous stabilizer codes.
Quantum error correction is the backbone of fault-tolerant quantum computation, a necessary requirement for any large scale quantum computer. The fault-tolerance threshold theorem has long been a target for experimental precision, allowing for the possibility of reducing logical error rates to arbitrarily low levels without excessive overhead. While there are many promising fault-tolerant architectures, the path towards the most practical fault-tolerant scheme is far from decided and may vary for differing physical models. This thesis proposes new schemes for universal fault-tolerant quantum computation in both the concatenated and topological code settings. \n \nThrough the concatenation of two different error correcting codes, a set of universal fault-tolerant gates can be obtained without requiring the need for magic state distillation. A lower bound of 1.28times10−3 for the fault-tolerance threshold under circuit level depolarizing noise is obtained. Additionally, stacked codes are proposed as a means to simulate the action of a 3D topological code in 2D, allowing for the application of a universal set of transversal operations. While fault-tolerant, unfortunately the scheme does not exhibit a threshold due to the decreasing pseudo-threshold with growing code distance, yet points to potential interesting avenues for fault-tolerant computation in 2D without distillation. \n \nOne of the primary avenues to constructing fault-tolerant logical operations is through transversal operations. In this thesis, the set of single qubit logical gates that can be implemented transversally are characterized and determined to all belong to the Clifford hierarchy. Moreover, any diagonal two-qubit operation that can be applied transversally must belong to the same level of the Clifford hierarchy as the set of gates that can be implemented in the single-qubit case. \n \nThe opposite to quantum error correction is privacy, where the output of a channel is disguised from its input. The two are fundamentally related through the complementary channel construction. This thesis presents a new class of private quantum channels, expanding the existing class beyond a seemingly fundamental restriction. This yields interesting insights into the structure of quantum information and the leaking of information to external environments. Additionally, the duality is only recovered when extending the complementary channel to sufficiently high environmental dimension. \n \nFinally, the error properties of bucket brigade quantum Random Access Memory (qRAM) are assessed. It is determined that using the bucket brigade qRAM architecture for the running of Grover's algorithm necessitates reducing the error rate of the individual components to exponentially small levels for an exponential sized memory. As such, fault-tolerant architectures will likely play an essential role in the construction of such computing primitives.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit.
We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.