Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica Scripta

Entanglement near the optical instability point in damped four wave mixing systems

Surasak Chiangga, Wipawee Temnuch, Till Daniel Frank

Published Apr 25, 2018• 3 citations
Publisher

Abstract

Abstract Entanglement of electromagnetic field modes of signal and idler photons generated by four-wave mixing (FWM) devices is a quantum phenomenon that has been examined in various experimental and theoretical studies. The focus of this theoretical study is on two aspects of this phenomenon: the emergence of signal and idler photons due to an optical instability and the entanglement of the signal and idler modes above the instability threshold. For simple FWM devices that are subjected to damping it is shown that the signal and idler modes are entangled close to the point of optical instability at which the signal and idler photons emerges. The degree of entanglement as measured by a particular entanglement function proposed earlier in the literature assumes at the point of optical instability a unique value that is independent of the model parameters of the devices. The value is slightly higher than the value reported in a FWM experiment by Boyer et al (2008 Science 321 544). Numerical simulations suggest that the aforementioned entanglement function is U-shaped such that the degree of entanglement at the instability point is the maximal possible one and represents the optimal value. A similar U-shaped pattern was observed in an FWM experiment conducted by Lawrie et al (2016 Appl. Phys. Lett. 108 151107). Our semi-analytical findings are derived within the framework of the positive P representation of quantum optical processes and are compared with the aforementioned experimental observations by Boyer et al and Lawrie et al .

DOI
10.1088/1402-4896/aab828

Related papers

Lower Order and Higher Order Entanglement in Four‐Wave Mixing Process

Moumita Das, Biswajit Sen, Ayan Ray +1 more

Abstract Possibilities of generation of lower order and higher order intermodal entanglement in four‐wave mixing (FWM) process are rigorously investigated using Sen‐Mandal perturbative technique. The investigation has revealed that for a set of experimentally realizable parameters, one can observe lower order and higher order intermodal entanglement between pump and signal modes and signal and idler modes in a FWM process. In addition, trimodal entanglement involving pump, signal and idler modes is also reported.

arXiv:1608.01781•Annalen der Physik•Sep 27, 2017•5 citations

Single-Photon Induced Correlation with Integrated Quantum Frequency Combs

Yanbing Young Zhang, David Moss, Roberto Morandotti +8 more

Quantum correlations, where two or more parties exhibit strong correlations in a particular degree of freedom are important resources for fundamental science [1], such as the exploration of non-locality and entanglement, as well as non-classical technologies including quantum computation, quantum key distribution and quantum metrology. One typical way to generate correlated photon pairs is to use the spontaneous four-wave mixing process, with demonstrations on various platforms [2]. So far, single-photon stimulated four-wave mixing (FWM) has been demonstrated in optical fibers [3]. Here we show induced correlation by single photon seeded FWM through exploiting the orthogonal polarization modes in an integrated ring resonator [4]. We allow two different four-wave mixing processes to occur simultaneously with the same signal frequency mode but different idler frequency modes (see Fig.1(a)). The single-photon induced FWM process, named here seeded FWM, was created through the link of type-0 SFWM and type-2 SFWM. In the type-0 process, two excitation photons from the same field are converted into two new photons, signal and idler, with the same polarization as the pump field. While in the type-2 FWM, two annihilated photons, each one from a different polarized pump field, namely TE and TM, generate an orthogonal-polarized photon pair. More importantly, spatial and temporal overlapping of two processes and their sharing of one common resonance lead to correlation between the other two signal photons, one from each process. For example, an idler photon created in type-0 FWM seeds the type-2 FWM process or vice versa, i.e. the TM idler photon in Fig. 1, induces correlation between the signal TM and TE photons. This is proven by the observation of a clear coincidence peak for both signal photons in Fig.1(b). Furthermore, we confirmed our observation via power-dependent correlation measurements (see Fig.1 (c)). We summarized the true coincidence count (C) and its coincidence to accidental ratio (CAR) when only the TE pump power is increased while maintaining the TM mode pump power (black squares), and both pump powers are increased with a constant ratio (blue dots). We found that the seeded FWM scales with the square of both pump powers (C ∝ PjePtm) and that the CAR reach its maxima of 1.5 at the available pump power, indicating thermal statistics. Our findings are relevant to the fundamental understanding of spontaneous parametric effects as well as single-photon induced processes and single photon cloning.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

Instabilities and quantum noise reduction in nonlinear optical mixing

Massimo Brambilla, F. Castelli, A. Gatti +2 more

Nondegenerate four-wave-mixing (fwm) is a process by which one or two pump fields generate two signal beams, with conservation of the total photon energy and momentum. The signal beams can be distinguished by their frequency, or by their wave vector, or by their polarization. When the nonlinear medium which creates the fwm process is contained in a resonant cavity, the signal generation is caused by an instability, because the signal fields experience gain (fwm gain), and when this gain overcomes the cavity losses the signal beams build up. This chapter discusses several static and dynamical instabilities which arise from nondegenerate fwm. It considers a cavity with plane mirrors and examines the properties of quantum noise reduction which arise in the intensity difference between the signal beams generated by the fwm process. The chapter illustrates the problem of Gauss-Laguerre transverse modes in a ring cavity with spherical mirrors.

CRC Press eBooks•May 4, 2018•3 citations

Optical-density enhanced quantum entanglement via four-wave mixing process

You-Lin Chuang, Rahmatullah Rahmatullah, Ite A. Yu

We theoretically propose a scheme to generate a strong continuous-variable quantum entangled light source in four-wave mixing (FWM) process by increasing the optical density of atomic medium. By properly choosing the input coupling field Rabi frequency and detuning, the optimized entanglement can be achieved to be better than -17 dB at an optical density of approximately 1, 000, which has been realized in atomic media. Besides, with the optimized one-photon detuning and coupling Rabi frequency, the optimum entanglement degree can be greatly enhanced with the increment of optical density. We also examine the effects of atomic decoherence rate and two-photon detuning on entanglement in a realistic setting, and evaluate the experimental feasibility. We find that the entanglement can be further improved by considering two-photon detuning. In addition, with optimum parameters the entanglement is robust against the decoherence. The strong entanglement provides a promising applications in continuous-variable quantum communications.

Optics Express•Mar 29, 2023•2 citations

Experimental characterization of quantum correlated triple beams generated by cascaded four-wave mixing processes

Zhongzhong Qin, Leiming Cao, Jietai Jing

Quantum correlations and entanglement shared among multiple modes are fundamental ingredients of most continuous-variable quantum technologies. Recently, a method used to generate multiple quantum correlated beams using cascaded four-wave mixing (FWM) processes was theoretically proposed and experimentally realized by our group [Z. Qin et al., Phys. Rev. Lett. 113, 023602 (2014)]. Our study of triple-beam quantum correlation paves the way to showing the tripartite entanglement in our system. Our system also promises to find applications in quantum information and precision measurement such as the controlled quantum communications, the generation of multiple quantum correlated images, and the realization of a multiport nonlinear interferometer. For its applications, the degree of quantum correlation is a crucial figure of merit. In this letter, we experimentally study how various parameters, such as the cell temperatures, one-photon, and two-photon detunings, influence the degree of quantum correlation between the triple beams generated from the cascaded two-FWM configuration.

Applied Physics Letters•May 25, 2015•25 citations

Towards generation of hybrid entangled photon pairs by spectrally overlapping intermodal-vectorial four-wave mixing bands in optical fibers

Andrzej Gawlik, Marta Bernaś, Kinga Żołnacz +1 more

Optical fiber-based sources of photon pairs with hybrid entanglement across multiple degrees of freedom are essential for a wide range of quantum technologies, while remaining compatible with existing communication networks. In this paper, we use a birefringent few-mode fiber to demonstrate an intermodal-vectorial four-wave mixing process that generates two pairs of spectrally overlapping signal-idler bands. Using phase-matching conditions, we show that the pairs of bands become spectrally indistinguishable when the group refractive indices of the signal and idler modes intersect at the pump wavelength. Our theoretical predictions are confirmed through experimental observations and corroborated by numerical simulations. Furthermore, we introduce the two-photon state associated with the overlapping bands, which simultaneously exhibits entanglement in a single degree of freedom and hybrid entanglement across multiple degrees of freedom. We also explain how the type and degree of entanglement can be controlled by tailoring the spectral overlap between the signal-idler bands. This study presents a promising scheme for a fiber-based source of photon pairs with entanglement spanning the spatial, polarization, and frequency degrees of freedom.

arXiv:2412.09214•Scientific Reports•Nov 27, 2025•1 citation
Abstract Entanglement of electromagnetic field modes of signal and idler photons generated by four-wave mixing (FWM) devices is a quantum phenomenon that has been examined in various experimental and theoretical studies. The focus of this theoretical study is on two aspects of this phenomenon: the emergence of signal and idler photons due to an optical instability and the entanglement of the signal and idler modes above the instability threshold. For simple FWM devices that are subjected to damping it is shown that the signal and idler modes are entangled close to the point of optical instability at which the signal and idler photons emerges. The degree of entanglement as measured by a particular entanglement function proposed earlier in the literature assumes at the point of optical instability a unique value that is independent of the model parameters of the devices. The value is slightly higher than the value reported in a FWM experiment by Boyer et al (2008 Science 321 544). Numerical simulations suggest that the aforementioned entanglement function is U-shaped such that the degree of entanglement at the instability point is the maximal possible one and represents the optimal value. A similar U-shaped pattern was observed in an FWM experiment conducted by Lawrie et al (2016 Appl. Phys. Lett. 108 151107). Our semi-analytical findings are derived within the framework of the positive P representation of quantum optical processes and are compared with the aforementioned experimental observations by Boyer et al and Lawrie et al .
Abstract Possibilities of generation of lower order and higher order intermodal entanglement in four‐wave mixing (FWM) process are rigorously investigated using Sen‐Mandal perturbative technique. The investigation has revealed that for a set of experimentally realizable parameters, one can observe lower order and higher order intermodal entanglement between pump and signal modes and signal and idler modes in a FWM process. In addition, trimodal entanglement involving pump, signal and idler modes is also reported.
Quantum correlations, where two or more parties exhibit strong correlations in a particular degree of freedom are important resources for fundamental science [1], such as the exploration of non-locality and entanglement, as well as non-classical technologies including quantum computation, quantum key distribution and quantum metrology. One typical way to generate correlated photon pairs is to use the spontaneous four-wave mixing process, with demonstrations on various platforms [2]. So far, single-photon stimulated four-wave mixing (FWM) has been demonstrated in optical fibers [3]. Here we show induced correlation by single photon seeded FWM through exploiting the orthogonal polarization modes in an integrated ring resonator [4]. We allow two different four-wave mixing processes to occur simultaneously with the same signal frequency mode but different idler frequency modes (see Fig.1(a)). The single-photon induced FWM process, named here seeded FWM, was created through the link of type-0 SFWM and type-2 SFWM. In the type-0 process, two excitation photons from the same field are converted into two new photons, signal and idler, with the same polarization as the pump field. While in the type-2 FWM, two annihilated photons, each one from a different polarized pump field, namely TE and TM, generate an orthogonal-polarized photon pair. More importantly, spatial and temporal overlapping of two processes and their sharing of one common resonance lead to correlation between the other two signal photons, one from each process. For example, an idler photon created in type-0 FWM seeds the type-2 FWM process or vice versa, i.e. the TM idler photon in Fig. 1, induces correlation between the signal TM and TE photons. This is proven by the observation of a clear coincidence peak for both signal photons in Fig.1(b). Furthermore, we confirmed our observation via power-dependent correlation measurements (see Fig.1 (c)). We summarized the true coincidence count (C) and its coincidence to accidental ratio (CAR) when only the TE pump power is increased while maintaining the TM mode pump power (black squares), and both pump powers are increased with a constant ratio (blue dots). We found that the seeded FWM scales with the square of both pump powers (C ∝ PjePtm) and that the CAR reach its maxima of 1.5 at the available pump power, indicating thermal statistics. Our findings are relevant to the fundamental understanding of spontaneous parametric effects as well as single-photon induced processes and single photon cloning.
Nondegenerate four-wave-mixing (fwm) is a process by which one or two pump fields generate two signal beams, with conservation of the total photon energy and momentum. The signal beams can be distinguished by their frequency, or by their wave vector, or by their polarization. When the nonlinear medium which creates the fwm process is contained in a resonant cavity, the signal generation is caused by an instability, because the signal fields experience gain (fwm gain), and when this gain overcomes the cavity losses the signal beams build up. This chapter discusses several static and dynamical instabilities which arise from nondegenerate fwm. It considers a cavity with plane mirrors and examines the properties of quantum noise reduction which arise in the intensity difference between the signal beams generated by the fwm process. The chapter illustrates the problem of Gauss-Laguerre transverse modes in a ring cavity with spherical mirrors.
We theoretically propose a scheme to generate a strong continuous-variable quantum entangled light source in four-wave mixing (FWM) process by increasing the optical density of atomic medium. By properly choosing the input coupling field Rabi frequency and detuning, the optimized entanglement can be achieved to be better than -17 dB at an optical density of approximately 1, 000, which has been realized in atomic media. Besides, with the optimized one-photon detuning and coupling Rabi frequency, the optimum entanglement degree can be greatly enhanced with the increment of optical density. We also examine the effects of atomic decoherence rate and two-photon detuning on entanglement in a realistic setting, and evaluate the experimental feasibility. We find that the entanglement can be further improved by considering two-photon detuning. In addition, with optimum parameters the entanglement is robust against the decoherence. The strong entanglement provides a promising applications in continuous-variable quantum communications.
Quantum correlations and entanglement shared among multiple modes are fundamental ingredients of most continuous-variable quantum technologies. Recently, a method used to generate multiple quantum correlated beams using cascaded four-wave mixing (FWM) processes was theoretically proposed and experimentally realized by our group [Z. Qin et al., Phys. Rev. Lett. 113, 023602 (2014)]. Our study of triple-beam quantum correlation paves the way to showing the tripartite entanglement in our system. Our system also promises to find applications in quantum information and precision measurement such as the controlled quantum communications, the generation of multiple quantum correlated images, and the realization of a multiport nonlinear interferometer. For its applications, the degree of quantum correlation is a crucial figure of merit. In this letter, we experimentally study how various parameters, such as the cell temperatures, one-photon, and two-photon detunings, influence the degree of quantum correlation between the triple beams generated from the cascaded two-FWM configuration.
Optical fiber-based sources of photon pairs with hybrid entanglement across multiple degrees of freedom are essential for a wide range of quantum technologies, while remaining compatible with existing communication networks. In this paper, we use a birefringent few-mode fiber to demonstrate an intermodal-vectorial four-wave mixing process that generates two pairs of spectrally overlapping signal-idler bands. Using phase-matching conditions, we show that the pairs of bands become spectrally indistinguishable when the group refractive indices of the signal and idler modes intersect at the pump wavelength. Our theoretical predictions are confirmed through experimental observations and corroborated by numerical simulations. Furthermore, we introduce the two-photon state associated with the overlapping bands, which simultaneously exhibits entanglement in a single degree of freedom and hybrid entanglement across multiple degrees of freedom. We also explain how the type and degree of entanglement can be controlled by tailoring the spectral overlap between the signal-idler bands. This study presents a promising scheme for a fiber-based source of photon pairs with entanglement spanning the spatial, polarization, and frequency degrees of freedom.