Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Sensing and Nano Electronics and Photonics

One quantum sensor for all gases: cavity-enhanced Raman spectroscopy for food-chain monitoring

Stefan Palzer, Jürgen Wöllenstein, Vincenz Sandfort, Jens Goldschmidt

Published Jan 26, 2018• 0 citations
Publisher

Abstract

The comprehensive monitoring of the food chain, i.e. from growth to consumer, without gaps is of outstanding importance to consumer health and the food industry alike. Yet, due to the lack of suitable sensing technologies at adequate costs, only selective, critical spots can currently be monitored. While the particular food to be monitored may take any shape or form during processing, gases are always present and their composition is uniquely suited to learn about the state of the system. In this contribution, a universal quantum sensor concept to identify and quantify the components of complex gas matrices is presented. The sensing approach is based on detecting Raman scattered photons from inside a gas sample filled optical cavity. Because of the typically small Raman scattering cross-sections on the order of 10-30 cm2 a Fabry-Perot cavity with a Finesse of about 2,000 is used to enhance the available laser power of an extended cavity diode laser running at 780 nm. The scattered light is funneled onto a spectrometer after Rayleigh scattered photons have been suppressed using a notch filter. To allow in-situ determination of arbitrary gas matrices, the sensor concept relies on the diffusion of ambient air into the cavity. The setup is currently able to simultaneously detect gases with Raman spectra up to 3000 cm-1, which includes important indicators for food packaging, including nitrogen, oxygen, and carbon dioxide.

DOI
10.1117/12.2289732

Related papers

On-chip mid-infrared spectroscopy without mid-infrared photons

Boyi Xue, Renhong Gao, Yicheng Zhu +7 more

Mid-infrared (mid-IR) spectra revealing the distinct “fingerprint” of molecules are of critical importance for both science and technology in chemistry, physics, materials science, and biology. Mid-IR sensing and spectroscopy provide unique and powerful tools for crucial applications in greenhouse gas monitoring, hazardous emission detection, and medical breath diagnosis. However, the low-photon energy characteristic of the mid-IR spectrum poses significant challenges for both mid-IR light sources and detectors, hindering their compact and cost-efficient applications in various areas. Here, we experimentally demonstrate mid-IR gas spectroscopy without mid-IR photons solely using convenient near-IR optical components. This is realized by generating photon pairs (i.e., a mid-IR photon and a near-IR one) through a spontaneous parametric downconversion in a microscale optical cavity. The generation rate of near-IR photons strongly relies on the absorption of the mid-IR photon due to their quantum correlation. Through interacting with evanescent fields around the microcavity, the absorptive mid-IR resonances of the surrounding gas greatly affect the detected near-IR photons without harassing any mid-IR photon. This scheme presents a cost-effective and compact solution for on-chip quantum gas spectroscopy without requiring expensive mid-IR lasers and detectors or lasers, thereby paving new avenues for applications in environmental monitoring/safety, healthcare, and agriculture.

Applied Physics Reviews•Jan 5, 2026•3 citations

APPLICATION OF ARGON PRESSURE BROADENED RUBIDIUM VAPOR CELLS AS ULTRA-NARROW NOTCH FILTERS

Sam Groetsch

Raman spectroscopy is a widely used, highly versatile, and non-destructive method for characterizing the molecular makeup of unknown samples. In nearly all applications the vibrational modes of the constituent molecules provide the mechanism by which the laser light is inelastically scattered and consequently identified. However, the rotational modes of these molecules provide much greater relative rates of inelastic scattering than the vibrational modes. Unfortunately, due to the nature of current filters used in Raman spectroscopy when the laser light is filtered out so is the light scattered by the pure rotational modes. In this research, we propose the use of a Rubidium vapor cell filled with a buffer gas of Argon as a viable ultra-narrow notch filter. This filter would provide a robust laser rejection without removing the light scattered by the pure rotational modes of molecules. Measurement of the pure rotational spectrum of gases can have numerous applications such as precision measurement of exhaled gases for medical diagnostics, highly accurate remote measurement of atmospheric temperatures, and extremely sensitive detection of dangerous air contamination in dusty environments.

•Jan 1, 2022•0 citations

Cavity-enhanced phase-matched coherent Stokes Raman spectroscopy

Kohei Uemoto, Noritada Kaji, Shin-ichi Zaitsu

Coherent Raman spectroscopy is widely applied to mitigate the effects of the smallness of scattering cross-sections common in standard Raman spectroscopy. In this work, we use phased-matched coherent “Stokes” Raman scattering in a macroscopic high-finesse optical enhancement cavity pumped using a narrow-band continuous-wave laser to intensify Raman signals derived from a trace of gaseous Raman-active molecules. To demonstrate the superiority of this method, we directly measure the ratio of signals arising from coherent Raman scattering to those arising from spontaneous Raman scattering in a gaseous medium under the same conditions. The measured enhancement ratio exceeds 10 9 and agrees well with the theoretically predicted value, strongly implying that the proposed method is highly promising for the ultrasensitive detection of traces of homonuclear diatomic molecules that are not accessible via absorption spectroscopy.

Optics Express•Oct 21, 2025•1 citation

Detecting quantum coherence of Bose gases in optical lattices by scattering light intensity in cavity

Xiaoji Zhou, Xu Xu, Lan Yin +2 more

We propose a new method of detecting quantum coherence of a Bose gas trapped in a one-dimensional optical lattice by measuring the light intensity from Raman scattering in cavity. After pump and displacement process, the intensity or amplitude of scattering light is different for different quantum states of a Bose gas, such as superfluid and Mott-Insulator states. This method can also be useful to detect quantum states of atoms with two components in an optical lattice.

Optics Express•Jul 9, 2010•7 citations

Overview of Quantum Sensing Materials and Techniques for Energy Sector Applications

Scott E. Crawford, Hari P. Paudel, Gary R. Lander +7 more

The energy sector has become increasingly dependent upon highly sensitive sensing devices for a wide range of applications. Variables such as temperature, pH, electromagnetic fields, ions, and pressure must be measured with high precision, often in harsh conditions (e.g. highly corrosive environments due to high temperature, pressure and humidity). These sensors are deployed in infrastructure such as transformers, pipelines, mines, nuclear power plants, and other areas to ensure safe operating conditions and uninterrupted, optimized service. Moreover, new opportunities for sensors have emerged due to the expansion of smart grids/meters, driverless vehicles, and the discovery of new oil, gas, and critical mineral deposits. The continued maturation of quantum sensing technologies offers exciting opportunities for quantum-enhanced measurements within the energy sector that may provide significant improvements in sensitivity beyond the classical limit. Here, an overview of established and emerging quantum materials for sensing applications will be provided, from trapped ions to color centers in diamond and silicon carbide. Associated quantum sensing methods for these materials will be discussed, with an emphasis on platforms that are nearing commercial viability. Specific application opportunities within the energy sector for quantum sensors will then be analyzed, including oil/gas discovery, greenhouse gas emission monitoring, pH and ion sensing, current measurement in electric vehicle batteries, and quantum-enhanced spectroscopy. Remaining barriers, such as quantum sensor platform miniaturization and ruggedization, will also be analyzed. A specific project at the National Energy Technology Laboratory involving the functionalization of qubits using metal-organic frameworks for enhanced quantum sensing will also be highlighted. Here, nitrogen vacancy centers (NV) in nanodiamonds, a commercially available qubit with long coherence times and utilizable quantum properties at room temperature, are encapsulated in a controlled way using the metal-organic framework ZIF-8. The ZIF-8 provides a well-defined, porous scaffold that can be controlled to promote the selective uptake of specific target analytes, such as gas molecules or ions. The quantum sensing performance of this composite material is either preserved or enhanced following ZIF-8 encapsulation; the optically detected magnetic resonance response of the NV nanodiamonds with and without the ZIF-8 coating are identical, while the ZIF-8 coating increases the longitudinal spin relaxation lifetime (T1) of the NV centers, an important parameter for spin relaxometry-based quantum sensing experiments. Taken together, these results demonstrate the importance of qubit functionalization as a crucial step for rationally designing high performance quantum sensors.

•Jul 10, 2024•0 citations

Principles, Platforms and Real-World Applications of Quantum Sensing: A Review

Alyx Wilhelm, Nicolas Wanner, Archana T. Anilkumar +3 more

Quantum sensing converts perturbations of controlled quantum states into estimates of magnetic and electric fields, temperature, time and frequency, acceleration, rotation, gravity, and local spin environments. Although the field has produced exceptional laboratory demonstrations, comparisons across platforms are often obscured by incompatible metrics and by application-led descriptions that do not connect quantum dynamics to complete sensor architectures. This review develops a unified, sensor-centered framework linking Hamiltonian parameter encoding, superposition, coherence, decoherence, entanglement, quantum Fisher information, and readout to experimentally reported performance. Nitrogen-vacancy centers in diamond, optically pumped magnetometers, atomic and optical clocks, atom-interferometric inertial and gravity sensors, and Rydberg-atom electric-field sensors are examined using common criteria that include sensitivity, minimum detectable signal, response time, bandwidth, selectivity, spatial resolution, stability, dynamic range, operating conditions, calibration, and deployment maturity. Photonic quantum enhancement, quantum illumination, molecular-qubit sensing, and selected emerging platforms are discussed as cross-cutting cases. The review retains application coverage in biomedicine, navigation, timing, geophysics, agriculture, environmental monitoring, and defense, while distinguishing coherent quantum sensors from quantum-material-enabled conventional sensors. The comparison shows that practical advantage is rarely determined by sensitivity alone; sensor-to-source distance, shielding, laser and vacuum infrastructure, coherence, readout efficiency, calibration, packaging, environmental robustness, and cost frequently determine application viability. A deployment-oriented roadmap is presented for integrated control and readout, standardized benchmarking, hybrid quantum-classical operation, and responsible translation.

IEEE Sensors Journal•Jan 1, 2026•0 citations
The comprehensive monitoring of the food chain, i.e. from growth to consumer, without gaps is of outstanding importance to consumer health and the food industry alike. Yet, due to the lack of suitable sensing technologies at adequate costs, only selective, critical spots can currently be monitored. While the particular food to be monitored may take any shape or form during processing, gases are always present and their composition is uniquely suited to learn about the state of the system. In this contribution, a universal quantum sensor concept to identify and quantify the components of complex gas matrices is presented. The sensing approach is based on detecting Raman scattered photons from inside a gas sample filled optical cavity. Because of the typically small Raman scattering cross-sections on the order of 10-30 cm2 a Fabry-Perot cavity with a Finesse of about 2,000 is used to enhance the available laser power of an extended cavity diode laser running at 780 nm. The scattered light is funneled onto a spectrometer after Rayleigh scattered photons have been suppressed using a notch filter. To allow in-situ determination of arbitrary gas matrices, the sensor concept relies on the diffusion of ambient air into the cavity. The setup is currently able to simultaneously detect gases with Raman spectra up to 3000 cm-1, which includes important indicators for food packaging, including nitrogen, oxygen, and carbon dioxide.
Mid-infrared (mid-IR) spectra revealing the distinct “fingerprint” of molecules are of critical importance for both science and technology in chemistry, physics, materials science, and biology. Mid-IR sensing and spectroscopy provide unique and powerful tools for crucial applications in greenhouse gas monitoring, hazardous emission detection, and medical breath diagnosis. However, the low-photon energy characteristic of the mid-IR spectrum poses significant challenges for both mid-IR light sources and detectors, hindering their compact and cost-efficient applications in various areas. Here, we experimentally demonstrate mid-IR gas spectroscopy without mid-IR photons solely using convenient near-IR optical components. This is realized by generating photon pairs (i.e., a mid-IR photon and a near-IR one) through a spontaneous parametric downconversion in a microscale optical cavity. The generation rate of near-IR photons strongly relies on the absorption of the mid-IR photon due to their quantum correlation. Through interacting with evanescent fields around the microcavity, the absorptive mid-IR resonances of the surrounding gas greatly affect the detected near-IR photons without harassing any mid-IR photon. This scheme presents a cost-effective and compact solution for on-chip quantum gas spectroscopy without requiring expensive mid-IR lasers and detectors or lasers, thereby paving new avenues for applications in environmental monitoring/safety, healthcare, and agriculture.
Raman spectroscopy is a widely used, highly versatile, and non-destructive method for characterizing the molecular makeup of unknown samples. In nearly all applications the vibrational modes of the constituent molecules provide the mechanism by which the laser light is inelastically scattered and consequently identified. However, the rotational modes of these molecules provide much greater relative rates of inelastic scattering than the vibrational modes. Unfortunately, due to the nature of current filters used in Raman spectroscopy when the laser light is filtered out so is the light scattered by the pure rotational modes. In this research, we propose the use of a Rubidium vapor cell filled with a buffer gas of Argon as a viable ultra-narrow notch filter. This filter would provide a robust laser rejection without removing the light scattered by the pure rotational modes of molecules. Measurement of the pure rotational spectrum of gases can have numerous applications such as precision measurement of exhaled gases for medical diagnostics, highly accurate remote measurement of atmospheric temperatures, and extremely sensitive detection of dangerous air contamination in dusty environments.
Coherent Raman spectroscopy is widely applied to mitigate the effects of the smallness of scattering cross-sections common in standard Raman spectroscopy. In this work, we use phased-matched coherent “Stokes” Raman scattering in a macroscopic high-finesse optical enhancement cavity pumped using a narrow-band continuous-wave laser to intensify Raman signals derived from a trace of gaseous Raman-active molecules. To demonstrate the superiority of this method, we directly measure the ratio of signals arising from coherent Raman scattering to those arising from spontaneous Raman scattering in a gaseous medium under the same conditions. The measured enhancement ratio exceeds 10 9 and agrees well with the theoretically predicted value, strongly implying that the proposed method is highly promising for the ultrasensitive detection of traces of homonuclear diatomic molecules that are not accessible via absorption spectroscopy.
The energy sector has become increasingly dependent upon highly sensitive sensing devices for a wide range of applications. Variables such as temperature, pH, electromagnetic fields, ions, and pressure must be measured with high precision, often in harsh conditions (e.g. highly corrosive environments due to high temperature, pressure and humidity). These sensors are deployed in infrastructure such as transformers, pipelines, mines, nuclear power plants, and other areas to ensure safe operating conditions and uninterrupted, optimized service. Moreover, new opportunities for sensors have emerged due to the expansion of smart grids/meters, driverless vehicles, and the discovery of new oil, gas, and critical mineral deposits. The continued maturation of quantum sensing technologies offers exciting opportunities for quantum-enhanced measurements within the energy sector that may provide significant improvements in sensitivity beyond the classical limit. Here, an overview of established and emerging quantum materials for sensing applications will be provided, from trapped ions to color centers in diamond and silicon carbide. Associated quantum sensing methods for these materials will be discussed, with an emphasis on platforms that are nearing commercial viability. Specific application opportunities within the energy sector for quantum sensors will then be analyzed, including oil/gas discovery, greenhouse gas emission monitoring, pH and ion sensing, current measurement in electric vehicle batteries, and quantum-enhanced spectroscopy. Remaining barriers, such as quantum sensor platform miniaturization and ruggedization, will also be analyzed. A specific project at the National Energy Technology Laboratory involving the functionalization of qubits using metal-organic frameworks for enhanced quantum sensing will also be highlighted. Here, nitrogen vacancy centers (NV) in nanodiamonds, a commercially available qubit with long coherence times and utilizable quantum properties at room temperature, are encapsulated in a controlled way using the metal-organic framework ZIF-8. The ZIF-8 provides a well-defined, porous scaffold that can be controlled to promote the selective uptake of specific target analytes, such as gas molecules or ions. The quantum sensing performance of this composite material is either preserved or enhanced following ZIF-8 encapsulation; the optically detected magnetic resonance response of the NV nanodiamonds with and without the ZIF-8 coating are identical, while the ZIF-8 coating increases the longitudinal spin relaxation lifetime (T1) of the NV centers, an important parameter for spin relaxometry-based quantum sensing experiments. Taken together, these results demonstrate the importance of qubit functionalization as a crucial step for rationally designing high performance quantum sensors.
Quantum sensing converts perturbations of controlled quantum states into estimates of magnetic and electric fields, temperature, time and frequency, acceleration, rotation, gravity, and local spin environments. Although the field has produced exceptional laboratory demonstrations, comparisons across platforms are often obscured by incompatible metrics and by application-led descriptions that do not connect quantum dynamics to complete sensor architectures. This review develops a unified, sensor-centered framework linking Hamiltonian parameter encoding, superposition, coherence, decoherence, entanglement, quantum Fisher information, and readout to experimentally reported performance. Nitrogen-vacancy centers in diamond, optically pumped magnetometers, atomic and optical clocks, atom-interferometric inertial and gravity sensors, and Rydberg-atom electric-field sensors are examined using common criteria that include sensitivity, minimum detectable signal, response time, bandwidth, selectivity, spatial resolution, stability, dynamic range, operating conditions, calibration, and deployment maturity. Photonic quantum enhancement, quantum illumination, molecular-qubit sensing, and selected emerging platforms are discussed as cross-cutting cases. The review retains application coverage in biomedicine, navigation, timing, geophysics, agriculture, environmental monitoring, and defense, while distinguishing coherent quantum sensors from quantum-material-enabled conventional sensors. The comparison shows that practical advantage is rarely determined by sensitivity alone; sensor-to-source distance, shielding, laser and vacuum infrastructure, coherence, readout efficiency, calibration, packaging, environmental robustness, and cost frequently determine application viability. A deployment-oriented roadmap is presented for integrated control and readout, standardized benchmarking, hybrid quantum-classical operation, and responsible translation.