Forthcoming CMOS technology nodes are in principle sufficient for achieving both the quantum information density and the speed that are critical for error-free logical qubits. Using data from the roadmap for semiconductor devices from ITRS and IEDM, we applied the standard CMOS design rules to a universal set of quantum logic gates to control silicon qubits. We consequently obtain a scaling law for quantum information density for Steane code, concatenated codes, and surface code, which represent the quantum information equivalent of Moore's law in terms of density scaling per node. By imposing the constraints due to both quantum error correction and the intrinsic operation speed limitation of a physical silicon qubit, we determine that technology nodes below 14 nm can in principle support error-free logical qubits manipulated at GHz frequency. We review the current state-of- the-art of silicon technology to assess the performance of different silicon qubit architectures based on CMOS single donors and double quantum dot devices. Our analysis demonstrates that silicon technology is compatible with the scalability requirements imposed by quantum error correction architectures for universal quantum computing. Such considerations provide a benchmark for the development of a silicon-based quantum computer and a general guideline for other quantum technology platforms.
Forthcoming CMOS technology nodes are in principle sufficient for achieving both the quantum information density and the speed that are critical for error-free logical qubits. Using data from the roadmap for semiconductor devices from ITRS and IEDM, we applied the standard CMOS design rules to a universal set of quantum logic gates to control silicon qubits. We consequently obtain a scaling law for quantum information density for Steane code, concatenated codes, and surface code, which represent the quantum information equivalent of Moore's law in terms of density scaling per node. By imposing the constraints due to both quantum error correction and the intrinsic operation speed limitation of a physical silicon qubit, we determine that technology nodes below 14 nm can in principle support error-free logical qubits manipulated at GHz frequency. We review the current state-of- the-art of silicon technology to assess the performance of different silicon qubit architectures based on CMOS single donors and double quantum dot devices. Our analysis demonstrates that silicon technology is compatible with the scalability requirements imposed by quantum error correction architectures for universal quantum computing. Such considerations provide a benchmark for the development of a silicon-based quantum computer and a general guideline for other quantum technology platforms.
Abstract Even the quantum simulation of an apparently simple molecule such as Fe2S2requires a considerable number of qubits of the order of 106, while more complex molecules such as alanine (C3H7NO2) require about a hundred times more. In order to assess such a multimillion scale of identical qubits and control lines, the silicon platform seems to be one of the most indicated routes as it naturally provides, together with qubit functionalities, the capability of nanometric, serial, and industrial-quality fabrication. The scaling trend of microelectronic devices predicting that computing power would double every 2 years, known as Moore’s law, according to the new slope set after the 32-nm node of 2009, suggests that the technology roadmap will achieve the 3-nm manufacturability limit proposed by Kelly around 2020. Today, circuital quantum information processing architectures are predicted to take advantage from the scalability ensured by silicon technology. However, the maximum amount of quantum information per unit surface that can be stored in silicon-based qubits and the consequent space constraints on qubit operations have never been addressed so far. This represents one of the key parameters toward the implementation of quantum error correction for fault-tolerant quantum information processing and its dependence on the features of the technology node. The maximum quantum information per unit surface virtually storable and controllable in the compact exchange-only silicon double quantum dot qubit architecture is expressed as a function of the complementary metal–oxide–semiconductor technology node, so the size scale optimizing both physical qubit operation time and quantum error correction requirements is assessed by reviewing the physical and technological constraints. According to the requirements imposed by the quantum error correction method and the constraints given by the typical strength of the exchange coupling, we determine the workable operation frequency range of a silicon complementary metal–oxide–semiconductor quantum processor to be within 1 and 100 GHz. Such constraint limits the feasibility of fault-tolerant quantum information processing with complementary metal–oxide–semiconductor technology only to the most advanced nodes. The compatibility with classical complementary metal–oxide–semiconductor control circuitry is discussed, focusing on the cryogenic complementary metal–oxide–semiconductor operation required to bring the classical controller as close as possible to the quantum processor and to enable interfacing thousands of qubits on the same chip via time-division, frequency-division, and space-division multiplexing. The operation time range prospected for cryogenic control electronics is found to be compatible with the operation time expected for qubits. By combining the forecast of the development of scaled technology nodes with operation time and classical circuitry constraints, we derive a maximum quantum information density for logical qubits of 2.8 and 4 Mqb/cm2for the 10 and 7-nm technology nodes, respectively, for the Steane code. The density is one and two orders of magnitude less for surface codes and for concatenated codes, respectively. Such values provide a benchmark for the development of fault-tolerant quantum algorithms by circuital quantum information based on silicon platforms and a guideline for other technologies in general.
Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.
Abstract Quantum computation (QC) is one of the most challenging quantum technologies that promise to revolutionize data computation in the long-term by outperforming the classical supercomputers in specific applications. Errors will hamper this quantum revolution if not sufficiently limited and corrected by quantum error correction codes thus avoiding quantum algorithm failures. In particular millions of highly-coherent qubits arranged in a two-dimensional array are required to implement the surface code, one of the most promising codes for quantum error correction. One of the most attractive technologies to fabricate such large number of almost identical high-quality devices is the well known metal-oxide-semiconductor technology. Silicon quantum processor manufacturing can leverage the technological developments achieved in the last 50 years in the semiconductor industry. Here, we review modeling, fabrication aspects and experimental figures of merit of qubits defined in the spin degree of freedom of charge carriers confined in quantum dots and donors in silicon devices along with classical electronics innovations for qubit control and readout. Furthermore, we discuss potential applications of the technology and finally we review the role of start-ups and companies in the silicon-based QC era.
The pursuit of a universal, fault-tolerant quantum computer has transformed quantum computing from a predominantly theoretical discipline into a rapidly diversifying hardware ecosystem. This review presents a comprehensive and technically grounded analysis of the principal physical qubit modalities: superconducting circuits, trapped ions, photonic platforms, neutral atoms, semiconductor spin qubits, and topological approaches, focusing on their underlying operating principles, performance characteristics, and system-level constraints. We examine how these qubit technologies are embedded within scalable quantum processor architectures, including control and readout infrastructures, connectivity topologies, and quantum error correction strategies. The review provides a comparative study of key performance metrics, such as coherence times, gate fidelities, error rates, and scalability, reveals fundamental trade-offs between speed, robustness, and operational complexity that shape distinct technological roadmaps and target applications. We further highlight the ongoing transition from noisy intermediate-scale quantum (NISQ) devices toward architectures centred on logical qubits, driven by advances in materials engineering, precision control, and quantum information theory. Together, these developments sketch the emerging routes toward fault-tolerant quantum computing and practical quantum advantage, while offering readers a coherent entry point and reference guide to the current quantum hardware landscape.
Commercially-relevant quantum computers will require large numbers of high-performing qubits that can be manufactured, integrated, and controlled at scale. Silicon exchange-only (EO) qubits are a strong candidate modality due to their control-signal simplicity and compatibility with advanced semiconductor manufacturing, but questions remain around the achievability of sufficiently low noise and a scalable control and wiring solution. Here we introduce a quantum processing unit composed of a custom-designed cryogenic CMOS controller, a novel high-density superconducting ribbon cable, and a low-noise EO qubit device. The quantum chip features a three-rail array of 54 exchange-coupled quantum dots, configurable to host up to 18 EO qubits. We integrate and use these components to demonstrate qubit performance for both single-qubit and entangling operations that advances the EO state of the art by an order of magnitude. We further validate this system by implementing a distance-5 repetition code and a quantum error detecting code then make detailed comparisons with simulations. Our approach facilitates a utility-scale quantum computer with manageable operational and capital requirements.
Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.