Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Triggered high-purity telecom-wavelength single-photon generation from p-shell-driven InGaAs/GaAs quantum dot

Łukasz Dusanowski, Paweł Holewa, A. Maryński, Anna Musiał, Tobias Heuser, Nicole Srocka, David Quandt, A. Strittmatter, Sven Rodt, J. Misiewicz, Stephan Reitzenstein, Grzegorz Sek

Published Nov 29, 2017• 33 citations
Publisher

Abstract

We report on the experimental demonstration of triggered single-photon emission at the telecom O-band from In(Ga)As/GaAs quantum dots (QDs) grown by metal-organic vapor-phase epitaxy. Micro-photoluminescence excitation experiments allowed us to identify the p-shell excitonic states in agreement with high excitation photoluminescence on the ensemble of QDs. Hereby we drive an O-band-emitting GaAs-based QD into the p-shell states to get a triggered single photon source of high purity. Applying pulsed p-shell resonant excitation results in strong suppression of multiphoton events evidenced by the as measured value of the second-order correlation function at zero delay of 0.03 (and ~0.005 after background correction).

DOI
10.1364/oe.25.031122

Related papers

High‐Purity Triggered Single‐Photon Emission from Symmetric Single InAs/InP Quantum Dots around the Telecom C‐Band Window

Anna Musiał, Paweł Holewa, Paweł Wyborski +5 more

Abstract The authors demonstrate pure triggered single‐photon emission from quantum dots (QDs) around the telecommunication C‐band window, with characteristics preserved under non‐resonant excitation at saturation, that is, the highest possible, lifetime‐limited emission rates. The direct measurement of emission dynamics reveals photoluminescence decay times in the range of (1.7–1.8) ns corresponding to maximal photon generation rates exceeding 0.5 GHz. The measurements of the second‐order correlation function exhibit, for the best case, a lack of coincidences at zero time delay—no multiple photon events are registered within the experimental accuracy. This is achieved by exploiting a new class of low‐density and in‐plane symmetric InAs/InP QDs grown by molecular beam epitaxy on a distributed Bragg reflector, perfectly suitable for non‐classical light generation for quantum optics experiments and quantum‐secured fiber‐based optical communication schemes.

Advanced Quantum Technologies•Nov 7, 2019•60 citations

Coherent control and high purity single-photon emission from telecom quantum dots on metamorphic InGaAs

Beatrice Costa, Bianca Scaparra, Hubert Riedl +5 more

Semiconductor quantum dots emitting in the telecommunication O- and C-bands are promising candidates as single-photon sources for fiber-based quantum communication. In this work, we show how coherent quasi-resonant and phonon-assisted excitation help reveal the intrinsic optical properties of InAs quantum dots embedded in relaxed InGaAs matrices on top of metamorphic InGaAs layers for achieving emission in the telecom bands. By systematically comparing excitation schemes, we separate excitation-induced effects from intrinsic emitter properties. This allows us to observe linewidths as narrow as 21 $μ$eV, the disappearance of slow decay channels, and single-photon purity reaching second-order autocorrelation values in the order of $10^{-2}$. Photoluminescence excitation reveals higher excited states, enabling coherent control of trion transitions and the observation of Rabi-like oscillations in both telecom bands. These results confirm the promising potential of these quantum dots for applications in quantum technologies.

cond-mat.mes-hallCross-listedarXiv:2610.38060•Oct 29, 2026

Broadband telecom single-photon emissions from InAs/InP quantum dots grown by MOVPE droplet epitaxy

Shichen Zhang, Li Liu, Kai Guo +6 more

The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.

physics.opticsCross-listedarXiv:2511.16894•Nov 24, 2025

Strain-free, symmetrical, InGaAs quantum dots as single photon emitters in the telecomC-band

Rabbia Tahir, Paweł Wyborski, Artur Tuktamyshev +4 more

Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In$_{0.7}$Ga$_{0.3}$As/In$_{0.7}$Al$_{0.3}$As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In$_{0.7}$Al$_{0.3}$As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C$_{3v}$ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of $\approx$ 1.3--1.9 ns and linewidths as low as $\approx$ 300 $μ$eV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a $g^{(2)}(0)$ value of $0.141 \pm 0.027$

quant-pharXiv:2605.17332•May 19, 2026

Bright single-photon sources in the telecom band by deterministically coupling single quantum dots to a hybrid circular Bragg resonator

Shi-Wen Xu, Yuming Wei, Rongbin Su +7 more

High-performance solid-state quantum sources in the telecom band are of paramount importance for long-distance quantum communications and the quantum Internet by taking advantage of a low-loss optical fiber network. Here, we demonstrate bright telecom-wavelength single-photon sources based on In(Ga)As/GaAs quantum dots (QDs) deterministically coupled to hybrid circular Bragg resonators (h-CBRs) by using a wide-field fluorescence imaging technique. The QD emissions are redshifted toward the telecom O-band by using an ultra-low InAs growth rate and an InGaAs strain reducing layer. Single-photon emissions under both continuous wave (CW) and pulsed operations are demonstrated, showing high brightness with count rates of 1.14 MHz and 0.34 MHz under saturation powers and single-photon purities of g ( 2 ) ( 0 ) = 0.11 ± 0.02 (CW) and g ( 2 ) ( 0 ) = 0.087 ± 0.003 (pulsed) at low excitation powers. A Purcell factor of 4.2 with a collection efficiency of 11.2 % ± 1 % at the first lens is extracted, suggesting efficient coupling between the QD and h-CBR. Our work contributes to the development of highly efficient single-photon sources in the telecom band for fiber-based quantum communication and future distributed quantum networks.

Photonics Research•Jun 6, 2022•33 citations

InP-based single-photon sources operating at telecom C-band with increased extraction efficiency

Anna Musiał, Monika Mikulicz, Paweł Mrowiński +7 more

In this work, we demonstrate a triggered single-photon source operating at the telecom C-band with photon extraction efficiency exceeding any reported values in this range. The non-classical light emission with low probability of the multiphoton events is realized with single InAs quantum dots (QDs) grown by molecular beam epitaxy and embedded directly in an InP matrix. Low QD spatial density on the order of 5 × 108 cm−2 to ∼2 × 109 cm−2 and symmetric shape of these nanostructures together with spectral range of emission make them relevant for quantum communication applications. The engineering of extraction efficiency is realized by combining a bottom distributed Bragg reflector consisting of 25 pairs of InP/In0.53Ga0.37Al0.1 As layers and cylindrical photonic confinement structures. Realization of such a technologically non-demanding approach even in a non-deterministic fashion results in photon extraction efficiency of (13.3 ± 2) % into 0.4 numerical aperture detection optics at approximately 1560 nm emission wavelength, i.e., close to the center of the telecom C-band.

arXiv:2102.00450•Applied Physics Letters•May 31, 2021•37 citations
We report on the experimental demonstration of triggered single-photon emission at the telecom O-band from In(Ga)As/GaAs quantum dots (QDs) grown by metal-organic vapor-phase epitaxy. Micro-photoluminescence excitation experiments allowed us to identify the p-shell excitonic states in agreement with high excitation photoluminescence on the ensemble of QDs. Hereby we drive an O-band-emitting GaAs-based QD into the p-shell states to get a triggered single photon source of high purity. Applying pulsed p-shell resonant excitation results in strong suppression of multiphoton events evidenced by the as measured value of the second-order correlation function at zero delay of 0.03 (and ~0.005 after background correction).
Abstract The authors demonstrate pure triggered single‐photon emission from quantum dots (QDs) around the telecommunication C‐band window, with characteristics preserved under non‐resonant excitation at saturation, that is, the highest possible, lifetime‐limited emission rates. The direct measurement of emission dynamics reveals photoluminescence decay times in the range of (1.7–1.8) ns corresponding to maximal photon generation rates exceeding 0.5 GHz. The measurements of the second‐order correlation function exhibit, for the best case, a lack of coincidences at zero time delay—no multiple photon events are registered within the experimental accuracy. This is achieved by exploiting a new class of low‐density and in‐plane symmetric InAs/InP QDs grown by molecular beam epitaxy on a distributed Bragg reflector, perfectly suitable for non‐classical light generation for quantum optics experiments and quantum‐secured fiber‐based optical communication schemes.
Semiconductor quantum dots emitting in the telecommunication O- and C-bands are promising candidates as single-photon sources for fiber-based quantum communication. In this work, we show how coherent quasi-resonant and phonon-assisted excitation help reveal the intrinsic optical properties of InAs quantum dots embedded in relaxed InGaAs matrices on top of metamorphic InGaAs layers for achieving emission in the telecom bands. By systematically comparing excitation schemes, we separate excitation-induced effects from intrinsic emitter properties. This allows us to observe linewidths as narrow as 21 μμμeV, the disappearance of slow decay channels, and single-photon purity reaching second-order autocorrelation values in the order of 10−210^{-2}10−2. Photoluminescence excitation reveals higher excited states, enabling coherent control of trion transitions and the observation of Rabi-like oscillations in both telecom bands. These results confirm the promising potential of these quantum dots for applications in quantum technologies.
The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.
Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In0.7_{0.7}0.7​Ga0.3_{0.3}0.3​As/In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C3v_{3v}3v​ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of ≈\approx≈ 1.3--1.9 ns and linewidths as low as ≈\approx≈ 300 μμμeV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a g(2)(0)g^{(2)}(0)g(2)(0) value of 0.141±0.0270.141 \pm 0.0270.141±0.027
High-performance solid-state quantum sources in the telecom band are of paramount importance for long-distance quantum communications and the quantum Internet by taking advantage of a low-loss optical fiber network. Here, we demonstrate bright telecom-wavelength single-photon sources based on In(Ga)As/GaAs quantum dots (QDs) deterministically coupled to hybrid circular Bragg resonators (h-CBRs) by using a wide-field fluorescence imaging technique. The QD emissions are redshifted toward the telecom O-band by using an ultra-low InAs growth rate and an InGaAs strain reducing layer. Single-photon emissions under both continuous wave (CW) and pulsed operations are demonstrated, showing high brightness with count rates of 1.14 MHz and 0.34 MHz under saturation powers and single-photon purities of g ( 2 ) ( 0 ) = 0.11 ± 0.02 (CW) and g ( 2 ) ( 0 ) = 0.087 ± 0.003 (pulsed) at low excitation powers. A Purcell factor of 4.2 with a collection efficiency of 11.2 % ± 1 % at the first lens is extracted, suggesting efficient coupling between the QD and h-CBR. Our work contributes to the development of highly efficient single-photon sources in the telecom band for fiber-based quantum communication and future distributed quantum networks.
In this work, we demonstrate a triggered single-photon source operating at the telecom C-band with photon extraction efficiency exceeding any reported values in this range. The non-classical light emission with low probability of the multiphoton events is realized with single InAs quantum dots (QDs) grown by molecular beam epitaxy and embedded directly in an InP matrix. Low QD spatial density on the order of 5 × 108 cm−2 to ∼2 × 109 cm−2 and symmetric shape of these nanostructures together with spectral range of emission make them relevant for quantum communication applications. The engineering of extraction efficiency is realized by combining a bottom distributed Bragg reflector consisting of 25 pairs of InP/In0.53Ga0.37Al0.1 As layers and cylindrical photonic confinement structures. Realization of such a technologically non-demanding approach even in a non-deterministic fashion results in photon extraction efficiency of (13.3 ± 2) % into 0.4 numerical aperture detection optics at approximately 1560 nm emission wavelength, i.e., close to the center of the telecom C-band.