Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP Advances

Megahertz high voltage pulse generator suitable for capacitive load

Yu Xu, Wei Chen, Hao Liang, Yu-Huai Li, Futian Liang, Qi Shen, Sheng‐Kai Liao, Cheng-Zhi Peng

Published Nov 1, 2017• 10 citations
Publisher

Abstract

A high voltage pulse generator is presented to drive Pockels cell. The Pockels cell behaves like a capacitor which slows the rise/fall time of the pulse and restrains the repetition rate of the generator. To drive the Pockels cell applied in quantum communication system, it requires about 1 MHz repetition rate with the rise/fall time of the pulse less than 50 ns, adjustable amplitude up to 800 V and an adjustable duration. With the assistance of self-designed transformers, the circuits is simplified that a pair of high current radio frequency (RF) MOSFET drivers are employed to switch the power MOSFETs at a high speed, and the power MOSFETs shape the final output pulse with the requirements. From the tests, the generator can produce 800 V square pulses continously at 1 MHz rate with 46 ns in risetime and 31 ns in falltime when driving a 51 pF capacitive load. And the generator is now used to drive Pockels cell for encoding the polarization of photons.

DOI
10.1063/1.5006827

Related papers

Low power high-performance radio frequency oscillator for driving ion traps

Yuan‐Yu Jau, Francisco Benito, Heather L. Partner +1 more

We report a simple, efficient, high voltage radio frequency (RF) generator powered by a single voltage source (1.5-7 V) to resonantly drive ion traps or other capacitive loads. Our circuit is able to deliver RF voltages > 500 V(p-p) at frequencies ranging from 0.1 to 10 MHz. This RF oscillator uses low-cost, commercially available components, and can be easily assembled onto a circuit board of a few cm(2). Because of its simplicity and good efficiency, this circuit is useful in applications requiring small size and low power consumption such as portable ion trap systems where the duration of operation under battery power is of concern.

Review of Scientific Instruments•Feb 1, 2011•13 citations

Stacked double-flux-quantum output amplifier

Quentin Herr

A suitable data link from RSFQ to semiconductor electronics remains challenging. We report an output amplifier that uses a new pulse multiplier circuit. The pulse multiplier consists of several stages arranged in series; a double-flux-quantum gate at each stage promotes the SFQ pulse to the next stage. Characteristics of the circuit design are: 1) DC power. As with the DFQ gate, every unshunted Josephson junction in the amplifier is loaded by critically-damped junctions that prevent voltage-state modes. 2) Equal rise and fall times that scale with output amplitude. In our case, 50 ps rise and fall time and 1-2 mV output amplitude can be realized, which is ideal for a data rate of 10 Gb/s. 3) Quantum accurate voltage multiplication independent of bias current. 4) Non-return-to-zero (NRZ) operation. The circuit was designed and successfully tested in our 8 kA/cm/sup 2/ foundry process. A 60 GHz pulse train, generated on-chip, was gated with RSFQ logic to produce a data pattern that was then fed into a pulse multiplier of either ten or twenty stages. Voltage multiplication was observed with operating margins of /spl plusmn/21% on bias current. Fast rise time was directly observed; unfortunately, fall time was spoiled by ringing on a 1 ns time scale. It is plausible that small changes to the physical layout of the circuit would produce desired operation.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•27 citations

Low-cost laser diode pulse generator for quantum information applications

Sitti Buathong, J Janpoon, Nattawut Suksawat +1 more

Abstract A simple short-pulse generator circuit based on electronic gates is designed for short electric pulse of about 12 ns at Full Width at Half Maximum (FWHM) and 3.6 Volt amplitude for driving a laser diode. Using our circuit with a 780 nm laser diode designed and fabricated for producing short light pulses. The circuit utilizes an AND gate, a XOR gate, and a common function generator, provides a repetition rate from DC up to 1 MHz. The laser pulses were generated and then detected via an avalanche photodiodes (APD). This finding can benefit the field of light-based quantum information including single photon experiments.

Journal of Physics Conference Series•Dec 1, 2021•4 citations

A 5 GHz and 7.5 V multi-amplitude modulator driving circuit for practical high-speed quantum key distribution

Xiang Liu, Mingqi Huang, Hao Min +3 more

Quantum key distribution (QKD) offers the ability of information theoretic security key exchange. The secure key rate is an important indicator for the practical QKD systems, which determines what kinds of applications can be supported. One most effective way to enhance the secure key rate is to increase the system repetition frequency. Here, we report an implementation of a high-speed DC-coupled modulator driving circuit with a repetition rate of up to 5 GHz. The circuit outputs a multi-amplitude return-to-zero pattern pulse with a maximum amplitude of 7.5 V. The design adapts to the various electro-optic modulators widely employed in QKD systems. The minimum pulse width is measured as 75 ps, with the relative noise level less than 1.5% for all the output amplitudes under random modulation.

Review of Scientific Instruments•Feb 1, 2020•8 citations

Design of high-voltage electronic driver for polarization encoding quantum transmitters

Hugo Filipe Costa, João G. Prata, Armando N. Pinto +1 more

We present the design and experimental implementation of a compact high-voltage driver tailored for multi-wave-plate electro-optical polarization controllers (EPC) in polarization-based DV-QKD subsystems. The driver is capable of deriving a 140 Vppoutput swing per wave-plate, supports modulation bandwidths up to 7.5MHz, with 10mV resolution, and incorporates per-channel Analog-to-Digital Converter (ADC) monitoring for real-time feedback. A two-stage architecture, with a low-voltage pre-amplification stage followed by a high-voltage output stage, is used with the input being provided by a 16-channel FMC216 Digital-to-Analog Converter (DAC) board, connected to Xilinx Zynq FPGA. Electrical characterization shows that both rise times (∼30ns) and maximum stable square-wave frequency, up to 7.5 MHz, improve as the input Vppincreases, with output gain scaling linearly with input amplitude. Optical testing demonstrates reliable polarization state stability and speed. By enabling fast, precise State of Polarization (SOP) control without bulky stabilization hardware, our driver significantly simplifies the design of polarization-encoded QKD transmitters and receivers, paving the way toward cost-effective, high-rate quantum communications.

International Conference on Transparent Optical Networks•Jul 6, 2025•0 citations

A fully integrated nanosecond burst RF generator for quantum technologies

Carlos Sánchez‐Azqueta, C. Aldea, Santiago Celma

Abstract Quantum technologies is an emerging field of physics and engineering based on exploiting properties of quantum mechanics such as entanglement, superposition, or tunneling, and which is expected to impact many applications, such as communications, simulation, computation, or sensing and metrology. The operation of quantum technologies is based on the manipulation of the quantum states of certain devices, either to induce transitions between states or to detect the transitions. Irrespective of the practical realization of these quantum devices, their manipulation requires interacting with their quantum resonant states, for which very narrow radio‐frequency (RF) bursts in the range of the GHz are required. Arbitrary waveform generators are used to generate these signals for test purposes, but this is not suitable for practical quantum technology applications, which will need to produce the required bursts by specific circuit building blocks with low power and small dimensions. Here, an integrated RF burst generator capable of producing GHz bursts shorter than 1 ns is presented. The proposed architecture is tested using a 5 GHz quadrature LC‐tank voltage‐controlled oscillator (LC‐VCO), showing that the four equally spaced phases can be switched every 500 ps, which allows the generation of more complex RF bursts for optimized quantum state manipulation.

Electronics Letters•Jan 1, 2024•3 citations
A high voltage pulse generator is presented to drive Pockels cell. The Pockels cell behaves like a capacitor which slows the rise/fall time of the pulse and restrains the repetition rate of the generator. To drive the Pockels cell applied in quantum communication system, it requires about 1 MHz repetition rate with the rise/fall time of the pulse less than 50 ns, adjustable amplitude up to 800 V and an adjustable duration. With the assistance of self-designed transformers, the circuits is simplified that a pair of high current radio frequency (RF) MOSFET drivers are employed to switch the power MOSFETs at a high speed, and the power MOSFETs shape the final output pulse with the requirements. From the tests, the generator can produce 800 V square pulses continously at 1 MHz rate with 46 ns in risetime and 31 ns in falltime when driving a 51 pF capacitive load. And the generator is now used to drive Pockels cell for encoding the polarization of photons.
We report a simple, efficient, high voltage radio frequency (RF) generator powered by a single voltage source (1.5-7 V) to resonantly drive ion traps or other capacitive loads. Our circuit is able to deliver RF voltages > 500 V(p-p) at frequencies ranging from 0.1 to 10 MHz. This RF oscillator uses low-cost, commercially available components, and can be easily assembled onto a circuit board of a few cm(2). Because of its simplicity and good efficiency, this circuit is useful in applications requiring small size and low power consumption such as portable ion trap systems where the duration of operation under battery power is of concern.
A suitable data link from RSFQ to semiconductor electronics remains challenging. We report an output amplifier that uses a new pulse multiplier circuit. The pulse multiplier consists of several stages arranged in series; a double-flux-quantum gate at each stage promotes the SFQ pulse to the next stage. Characteristics of the circuit design are: 1) DC power. As with the DFQ gate, every unshunted Josephson junction in the amplifier is loaded by critically-damped junctions that prevent voltage-state modes. 2) Equal rise and fall times that scale with output amplitude. In our case, 50 ps rise and fall time and 1-2 mV output amplitude can be realized, which is ideal for a data rate of 10 Gb/s. 3) Quantum accurate voltage multiplication independent of bias current. 4) Non-return-to-zero (NRZ) operation. The circuit was designed and successfully tested in our 8 kA/cm/sup 2/ foundry process. A 60 GHz pulse train, generated on-chip, was gated with RSFQ logic to produce a data pattern that was then fed into a pulse multiplier of either ten or twenty stages. Voltage multiplication was observed with operating margins of /spl plusmn/21% on bias current. Fast rise time was directly observed; unfortunately, fall time was spoiled by ringing on a 1 ns time scale. It is plausible that small changes to the physical layout of the circuit would produce desired operation.
Abstract A simple short-pulse generator circuit based on electronic gates is designed for short electric pulse of about 12 ns at Full Width at Half Maximum (FWHM) and 3.6 Volt amplitude for driving a laser diode. Using our circuit with a 780 nm laser diode designed and fabricated for producing short light pulses. The circuit utilizes an AND gate, a XOR gate, and a common function generator, provides a repetition rate from DC up to 1 MHz. The laser pulses were generated and then detected via an avalanche photodiodes (APD). This finding can benefit the field of light-based quantum information including single photon experiments.
Quantum key distribution (QKD) offers the ability of information theoretic security key exchange. The secure key rate is an important indicator for the practical QKD systems, which determines what kinds of applications can be supported. One most effective way to enhance the secure key rate is to increase the system repetition frequency. Here, we report an implementation of a high-speed DC-coupled modulator driving circuit with a repetition rate of up to 5 GHz. The circuit outputs a multi-amplitude return-to-zero pattern pulse with a maximum amplitude of 7.5 V. The design adapts to the various electro-optic modulators widely employed in QKD systems. The minimum pulse width is measured as 75 ps, with the relative noise level less than 1.5% for all the output amplitudes under random modulation.
We present the design and experimental implementation of a compact high-voltage driver tailored for multi-wave-plate electro-optical polarization controllers (EPC) in polarization-based DV-QKD subsystems. The driver is capable of deriving a 140 Vppoutput swing per wave-plate, supports modulation bandwidths up to 7.5MHz, with 10mV resolution, and incorporates per-channel Analog-to-Digital Converter (ADC) monitoring for real-time feedback. A two-stage architecture, with a low-voltage pre-amplification stage followed by a high-voltage output stage, is used with the input being provided by a 16-channel FMC216 Digital-to-Analog Converter (DAC) board, connected to Xilinx Zynq FPGA. Electrical characterization shows that both rise times (∼30ns) and maximum stable square-wave frequency, up to 7.5 MHz, improve as the input Vppincreases, with output gain scaling linearly with input amplitude. Optical testing demonstrates reliable polarization state stability and speed. By enabling fast, precise State of Polarization (SOP) control without bulky stabilization hardware, our driver significantly simplifies the design of polarization-encoded QKD transmitters and receivers, paving the way toward cost-effective, high-rate quantum communications.
Abstract Quantum technologies is an emerging field of physics and engineering based on exploiting properties of quantum mechanics such as entanglement, superposition, or tunneling, and which is expected to impact many applications, such as communications, simulation, computation, or sensing and metrology. The operation of quantum technologies is based on the manipulation of the quantum states of certain devices, either to induce transitions between states or to detect the transitions. Irrespective of the practical realization of these quantum devices, their manipulation requires interacting with their quantum resonant states, for which very narrow radio‐frequency (RF) bursts in the range of the GHz are required. Arbitrary waveform generators are used to generate these signals for test purposes, but this is not suitable for practical quantum technology applications, which will need to produce the required bursts by specific circuit building blocks with low power and small dimensions. Here, an integrated RF burst generator capable of producing GHz bursts shorter than 1 ns is presented. The proposed architecture is tested using a 5 GHz quadrature LC‐tank voltage‐controlled oscillator (LC‐VCO), showing that the four equally spaced phases can be switched every 500 ps, which allows the generation of more complex RF bursts for optimized quantum state manipulation.