Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Coherent absorption of two-photon states in metamaterials

Thomas Roger, Ashley Lyons, Dikla Oren, Vassili Savinov, João Valente, Stefano Vezzoli, Mordechai Segev, Nikolay I. Zheludev, Daniele Faccio

Published Jun 1, 2017• 0 citations
Publisher

Abstract

Multiple photon absorption processes typically have a nonlinear dependence on the amplitude of the incident optical field. On the other hand, quantum technologies rely on single photon events. It has therefore been of great technical difficulty to achieve nonlinear devices using single photons. This is due to the small cross-section of absorption in room temperature devices, with multi-photon absorption events occurring with extremely low probability. The lack of access to nonlinear processes severely inhibits the use of optics for a large number of applications surrounding quantum technologies. We demonstrate experimentally that by exploiting a coherent absorption mechanism for N=2 N00N states, outlined theoretically by Jeffers in 2000 [1] and experimentally explored by Roger et. al. in 2016 [2], that it is possible to determine and enhance the number of two photon states that are absorbed. Here a 50% absorbing metasurface is placed inside a Sagnac interferometer into which we inject a N00N state. We show that by tuning the phase φ of the input state, |2,0〉 + exp(-ί2φ) |0,2〉, we can selectively tune the output state. For an input phase of φ = π/2 or 3π/2 we find that a single photon is absorbed with 100% probability. However, when we tune the input phase to φ = 0 or π we see that either 0 or 2 photons are absorbed with equal probability. We have developed a theoretical model that, with no free parameters, fits the experimentally measured two-photon contribution and finds the maximum contribution of |0,0) (0,0| to the output state to be 40.5%.

DOI
10.1109/cleoe-eqec.2017.8087659

Related papers

Coherent metamaterial absorption of two-photon states with 40% efficiency

Ashley Lyons, Dikla Oren, Thomas Roger +6 more

Multiphoton absorption processes have a nonlinear dependence on the amplitude of the incident optical field, i.e., the number of photons. However, multiphoton absorption is generally weak and multiphoton events occur with extremely low probability. Consequently, it is extremely challenging to engineer quantum nonlinear devices that operate at the single photon level and the majority of quantum technologies have to rely on single photon interactions. Here we demonstrate experimentally and theoretically that exploiting coherent absorption of $N=2$ NOON states makes it possible to enhance the number of two-photon states that are absorbed by at most a factor of 2 with respect to a linear absorption process. An absorbing metasurface placed inside a Sagnac-style interferometer into which we inject an $N=2$ NOON state, exhibits two-photon absorption with $40.5%$ efficiency, close to the theoretical maximum. This high probability of simultaneous absorption of two photons holds the promise for applications in fields that require multiphoton upconversion but are hindered by high peak intensities.

arXiv:1709.03428•Physical Review A•Jan 14, 2019•39 citations

Coherent Absorption of N00N States

Thomas Roger, Sara Restuccia, Ashley Lyons +5 more

Recent results in deeply subwavelength thickness films demonstrate coherent control and logical gate operations with both classical and single-photon light sources. However, quantum processing and devices typically involve more than one photon and nontrivial input quantum states. Here we experimentally investigate two-photon N00N state coherent absorption in a multilayer graphene film. Depending on the N00N state input phase, it is possible to selectively choose between single- or two-photon absorption of the input state in the graphene film. These results demonstrate that coherent absorption in the quantum regime exhibits unique features, opening up applications in multiphoton spectroscopy and imaging.

arXiv:1603.04363•Physical Review Letters•Jul 6, 2016•61 citations

Nonlinear Interferometry for Quantum-Enhanced Measurements of Multiphoton Absorption

S. Panahiyan, Carlos Sánchez Muñoz, Maria V. Chekhova +1 more

Multiphoton absorption is of vital importance in many spectroscopic, microscopic, or lithographic applications. However, given that it is an inherently weak process, the detection of multiphoton absorption signals typically requires large field intensities, hindering its applicability in many practical situations. In this Letter, we show that placing a multiphoton absorbent inside an imbalanced nonlinear interferometer can enhance the precision of multiphoton cross section estimation with respect to strategies based on photon-number measurements using coherent or even squeezed light directly transmitted through the medium. In particular, the power scaling of the sensitivity with photon flux can be increased by 1 order compared with transmission measurements of the sample with coherent light, such that the measurement precision at any given intensity can be greatly enhanced. Furthermore, we show that this enhanced measurement precision is robust against experimental imperfections leading to photon losses, which usually tend to degrade the detection sensitivity. We trace the origin of this enhancement to an optimal degree of squeezing which has to be generated in a nonlinear SU(1,1) interferometer.

arXiv:2209.02697•Physical Review Letters•May 19, 2023•29 citations

Single photons for quantum information processing

Michael Nock

Single photons are the smallest excitation states of the elctromagnetic field. They can be experimentally created but there is no apparatus that performs this task with 100% efficiency. Many techniques and theorems of optical quantum information theory use single photons. In order to utilize them for information processing, it is reasonable to know if they had been successfully produced. In other words: One needs heralded single photons. How to achieve this, is the main result of this diploma thesis. The task has been to improve the efficiency of already existing single photon sources. An apparatus had to be found which postprocesses the output of such sources in order to either herald the photons or at least to improve the efficiency. This apparatus is explicitly allowed to use other optical sources, for example coherent states (laser). The situation has been formally represented by the assumption that single photon sources produce a mixture of vacuum and the single photon state. It is known that experimental set-ups also create higher photon contributions. These contributions are considered to be small in corresponding publications. For some cases they even seem to vanish at all. One can distinguish two regimes concerning the techniques which have been used in this work: linear and nonlinear optics. Linear optical tools, for example the beam splitter, do not absorb photons in the ideal case, but it is not easy to implement useful transformations by their means. Absorption and weak coupling are drawbacks which arise mainly in nonlinear optical media. This work shows that the interactions two-photon absorption and cross phase modulation can be used in schemes, which enable the heralding of single photons. Already there are some linear optical quantum gates which manipulate optical states by means of single photons. Photons do not interact with each other directly, in contrast to electrons for example. Therefore quantum gates which act on more than one mode are interesting. The effective interaction of these gates is not quitecomparable to unitary dynamics. Moreover, these gates do not function in each case. Measurements required in auxiliary modes yield different results for each single case and in order to obtain the desired effect the cases have to be selected according to the measurement results. It has been investigated, how such gates perform if they have statistical mixtures as a resource instead of perfect single-photon states. Yet, no improvement of the single-photon contribution has been accomplished by means of these apparatuses. Hereby it has not been disproved that it is possible to achieve this goal using other apparatuses and techniques of linear optics. Yet, it has been shown that an enhancement is possible but then a non-vanishing two-photon contribution is appended. One of the most basic quantum gates is the conditional sign flip. The optical 8 interaction cross phase modulation acts in quite the same way considering only single photons. This effect enables the heralding of single photons in the ideal case. Within this work it has been shown that a Mach-Zehnder interferometer, a cross phase modulating medium and a photo-detector can be employed for this purpose. One could use any source of light as input to the interferometer but a strong coherent state (laser) may be preferred for the purpose of enhancing the interaction. The absorption of two-photon states is another non-linear effect. Astonishingly this effect serves to generate a heralded single-photon state given two imperfect single-photon sources. First the photon adding tool is employed which consists of a beam splitter and a photo-detector. By means of that and the statistical mixtures of two single-photon sources one creates a mixture which contains vacuum, the single-photon state and additionally the two-photon Fock state. This mixture propagates through a Mach-Zehnder interferometer. The interferometer is adjusted such that it is transparent for incoming light. In addition to the interferometer alone a two-photon absorbing medium is placed in one of its arms. For this reason there is a chance that the two-photon contribution entering the interferometer is absorbed within this medium. We cannot exclude this unfortunate case. A detector is placed in one of the two output modes. The interferometer is adjusted such that the single photon state does not leave in the mode in which the detector is placed, but always in the other mode. The detector can only click if the two-photon state propagates through the interferometer and if it is not destroyed in the absorbing medium. If the detector then receives one photon it is obvious that another one must leave in the other mode. The whole phenomenon is very similar to the concept of null measurement. Although not a main result, it has been shown here that the so-called Hong-Ou-Mandel effect can be generalized. It has been proven that the beam splitter transforms Fock states with equal Fock number into superpositions of Fock numbers which are even in each mode. Another effect on special odd Fock states is conjectured.

•Jan 1, 2006•3 citations

Quantum Metasurfaces for Enhancement of Reverse Saturable Absorption

Ioannis Katsantonis, Maria Kafesaki

Reverse saturable absorption (RSA) occurs in nonlinear materials where the excited state exhibits higher absorption than the ground state. This study presents a full-wave spatio-temporal numerical model that accurately simulates coherent RSA by coupling quantum systems with Maxwell’s equations. The model enables the design of complex photonic metamaterials and metasurfaces beyond the capabilities of conventional absorption models. To demonstrate its effectiveness, we analyze a metasurface-enhanced optical absorber, achieving over twice the absorption enhancement compare to the bare layer. This approach paves the way for highly efficient low-power optical absorption devices, with applications in protective optics and photonic elements.

International Congress on Artificial Materials for Novel Wave Phenomena (Metamaterials)•Sep 1, 2025•0 citations

Quantum optical coherence: From linear to nonlinear interferometers

Kai-Hong Luo, Matteo Santandrea, Michael Stefszky +6 more

Interferometers provide a highly sensitive means to investigate and exploit the coherence properties of light in metrology applications. However, interferometers come in various forms and exploit different properties of the optical states within. In this paper, we introduce a classification scheme that characterizes any interferometer based on the number of involved nonlinear elements by studying their influence on single-photon and photon-pair states. Several examples of specific interferometers from these more general classes are discussed, and the theory describing the expected first-order and second-order coherence measurements for single-photon and single-photon-pair input states is summarized and compared. These theoretical predictions are then tested in an innovative experimental setup that is easily able to switch between implementing an interferometer consisting of only one or two nonlinear elements. The resulting singles and coincidence rates are measured in both configurations and the results are seen to fit well with the presented theory. The measured results of coherence are tied back to the presented classification scheme, revealing that our experimental design can be useful in gaining insight into the properties of the various interferometeric setups containing different degrees of nonlinearity.

arXiv:2104.02641•Physical Review A•Oct 21, 2021•23 citations
Multiple photon absorption processes typically have a nonlinear dependence on the amplitude of the incident optical field. On the other hand, quantum technologies rely on single photon events. It has therefore been of great technical difficulty to achieve nonlinear devices using single photons. This is due to the small cross-section of absorption in room temperature devices, with multi-photon absorption events occurring with extremely low probability. The lack of access to nonlinear processes severely inhibits the use of optics for a large number of applications surrounding quantum technologies. We demonstrate experimentally that by exploiting a coherent absorption mechanism for N=2 N00N states, outlined theoretically by Jeffers in 2000 [1] and experimentally explored by Roger et. al. in 2016 [2], that it is possible to determine and enhance the number of two photon states that are absorbed. Here a 50% absorbing metasurface is placed inside a Sagnac interferometer into which we inject a N00N state. We show that by tuning the phase φ of the input state, |2,0〉 + exp(-ί2φ) |0,2〉, we can selectively tune the output state. For an input phase of φ = π/2 or 3π/2 we find that a single photon is absorbed with 100% probability. However, when we tune the input phase to φ = 0 or π we see that either 0 or 2 photons are absorbed with equal probability. We have developed a theoretical model that, with no free parameters, fits the experimentally measured two-photon contribution and finds the maximum contribution of |0,0) (0,0| to the output state to be 40.5%.
Multiphoton absorption processes have a nonlinear dependence on the amplitude of the incident optical field, i.e., the number of photons. However, multiphoton absorption is generally weak and multiphoton events occur with extremely low probability. Consequently, it is extremely challenging to engineer quantum nonlinear devices that operate at the single photon level and the majority of quantum technologies have to rely on single photon interactions. Here we demonstrate experimentally and theoretically that exploiting coherent absorption of N=2N=2N=2 NOON states makes it possible to enhance the number of two-photon states that are absorbed by at most a factor of 2 with respect to a linear absorption process. An absorbing metasurface placed inside a Sagnac-style interferometer into which we inject an N=2N=2N=2 NOON state, exhibits two-photon absorption with 40.540.5%40.5 efficiency, close to the theoretical maximum. This high probability of simultaneous absorption of two photons holds the promise for applications in fields that require multiphoton upconversion but are hindered by high peak intensities.
Recent results in deeply subwavelength thickness films demonstrate coherent control and logical gate operations with both classical and single-photon light sources. However, quantum processing and devices typically involve more than one photon and nontrivial input quantum states. Here we experimentally investigate two-photon N00N state coherent absorption in a multilayer graphene film. Depending on the N00N state input phase, it is possible to selectively choose between single- or two-photon absorption of the input state in the graphene film. These results demonstrate that coherent absorption in the quantum regime exhibits unique features, opening up applications in multiphoton spectroscopy and imaging.
Multiphoton absorption is of vital importance in many spectroscopic, microscopic, or lithographic applications. However, given that it is an inherently weak process, the detection of multiphoton absorption signals typically requires large field intensities, hindering its applicability in many practical situations. In this Letter, we show that placing a multiphoton absorbent inside an imbalanced nonlinear interferometer can enhance the precision of multiphoton cross section estimation with respect to strategies based on photon-number measurements using coherent or even squeezed light directly transmitted through the medium. In particular, the power scaling of the sensitivity with photon flux can be increased by 1 order compared with transmission measurements of the sample with coherent light, such that the measurement precision at any given intensity can be greatly enhanced. Furthermore, we show that this enhanced measurement precision is robust against experimental imperfections leading to photon losses, which usually tend to degrade the detection sensitivity. We trace the origin of this enhancement to an optimal degree of squeezing which has to be generated in a nonlinear SU(1,1) interferometer.
Single photons are the smallest excitation states of the elctromagnetic field. They can be experimentally created but there is no apparatus that performs this task with 100% efficiency. Many techniques and theorems of optical quantum information theory use single photons. In order to utilize them for information processing, it is reasonable to know if they had been successfully produced. In other words: One needs heralded single photons. How to achieve this, is the main result of this diploma thesis. The task has been to improve the efficiency of already existing single photon sources. An apparatus had to be found which postprocesses the output of such sources in order to either herald the photons or at least to improve the efficiency. This apparatus is explicitly allowed to use other optical sources, for example coherent states (laser). The situation has been formally represented by the assumption that single photon sources produce a mixture of vacuum and the single photon state. It is known that experimental set-ups also create higher photon contributions. These contributions are considered to be small in corresponding publications. For some cases they even seem to vanish at all. One can distinguish two regimes concerning the techniques which have been used in this work: linear and nonlinear optics. Linear optical tools, for example the beam splitter, do not absorb photons in the ideal case, but it is not easy to implement useful transformations by their means. Absorption and weak coupling are drawbacks which arise mainly in nonlinear optical media. This work shows that the interactions two-photon absorption and cross phase modulation can be used in schemes, which enable the heralding of single photons. Already there are some linear optical quantum gates which manipulate optical states by means of single photons. Photons do not interact with each other directly, in contrast to electrons for example. Therefore quantum gates which act on more than one mode are interesting. The effective interaction of these gates is not quitecomparable to unitary dynamics. Moreover, these gates do not function in each case. Measurements required in auxiliary modes yield different results for each single case and in order to obtain the desired effect the cases have to be selected according to the measurement results. It has been investigated, how such gates perform if they have statistical mixtures as a resource instead of perfect single-photon states. Yet, no improvement of the single-photon contribution has been accomplished by means of these apparatuses. Hereby it has not been disproved that it is possible to achieve this goal using other apparatuses and techniques of linear optics. Yet, it has been shown that an enhancement is possible but then a non-vanishing two-photon contribution is appended. One of the most basic quantum gates is the conditional sign flip. The optical 8 interaction cross phase modulation acts in quite the same way considering only single photons. This effect enables the heralding of single photons in the ideal case. Within this work it has been shown that a Mach-Zehnder interferometer, a cross phase modulating medium and a photo-detector can be employed for this purpose. One could use any source of light as input to the interferometer but a strong coherent state (laser) may be preferred for the purpose of enhancing the interaction. The absorption of two-photon states is another non-linear effect. Astonishingly this effect serves to generate a heralded single-photon state given two imperfect single-photon sources. First the photon adding tool is employed which consists of a beam splitter and a photo-detector. By means of that and the statistical mixtures of two single-photon sources one creates a mixture which contains vacuum, the single-photon state and additionally the two-photon Fock state. This mixture propagates through a Mach-Zehnder interferometer. The interferometer is adjusted such that it is transparent for incoming light. In addition to the interferometer alone a two-photon absorbing medium is placed in one of its arms. For this reason there is a chance that the two-photon contribution entering the interferometer is absorbed within this medium. We cannot exclude this unfortunate case. A detector is placed in one of the two output modes. The interferometer is adjusted such that the single photon state does not leave in the mode in which the detector is placed, but always in the other mode. The detector can only click if the two-photon state propagates through the interferometer and if it is not destroyed in the absorbing medium. If the detector then receives one photon it is obvious that another one must leave in the other mode. The whole phenomenon is very similar to the concept of null measurement. Although not a main result, it has been shown here that the so-called Hong-Ou-Mandel effect can be generalized. It has been proven that the beam splitter transforms Fock states with equal Fock number into superpositions of Fock numbers which are even in each mode. Another effect on special odd Fock states is conjectured.
Reverse saturable absorption (RSA) occurs in nonlinear materials where the excited state exhibits higher absorption than the ground state. This study presents a full-wave spatio-temporal numerical model that accurately simulates coherent RSA by coupling quantum systems with Maxwell’s equations. The model enables the design of complex photonic metamaterials and metasurfaces beyond the capabilities of conventional absorption models. To demonstrate its effectiveness, we analyze a metasurface-enhanced optical absorber, achieving over twice the absorption enhancement compare to the bare layer. This approach paves the way for highly efficient low-power optical absorption devices, with applications in protective optics and photonic elements.
Interferometers provide a highly sensitive means to investigate and exploit the coherence properties of light in metrology applications. However, interferometers come in various forms and exploit different properties of the optical states within. In this paper, we introduce a classification scheme that characterizes any interferometer based on the number of involved nonlinear elements by studying their influence on single-photon and photon-pair states. Several examples of specific interferometers from these more general classes are discussed, and the theory describing the expected first-order and second-order coherence measurements for single-photon and single-photon-pair input states is summarized and compared. These theoretical predictions are then tested in an innovative experimental setup that is easily able to switch between implementing an interferometer consisting of only one or two nonlinear elements. The resulting singles and coincidence rates are measured in both configurations and the results are seen to fit well with the presented theory. The measured results of coherence are tied back to the presented classification scheme, revealing that our experimental design can be useful in gaining insight into the properties of the various interferometeric setups containing different degrees of nonlinearity.