In this experiment, pairs of identical photons at 806 nm through a single-photon down conversion in a nonlinear crystal that are sent onto a plasmonic platform were generated. The plasmonic platform consists in several elements that are etched on a 300 nm-thick gold film on top of a silica substrate, on a total 40x40μm footprint. The input channels of the plasmonic platform are made of two unidirectional launchers. Those asymmetric 11-grooves gratings have been designed to efficiently couple a normally incident Gaussian mode into directional SPPs. The SPPs generated by each launcher then freely propagate and recombine on the surface plasmon beamsplitter (SPBS). It is made of two identical grooves in the metallic surface, oriented at 45° with respect to the propagation direction of waves. The succession of metal and air allows a scattering process that generates both a transmitted and a reflected SPP. The SPPs then propagate towards two large outcoupling strip slits. They are decoupled into photons propagating in the glass substrate on the rear of the platform.
In this experiment, pairs of identical photons at 806 nm through a single-photon down conversion in a nonlinear crystal that are sent onto a plasmonic platform were generated. The plasmonic platform consists in several elements that are etched on a 300 nm-thick gold film on top of a silica substrate, on a total 40x40μm footprint. The input channels of the plasmonic platform are made of two unidirectional launchers. Those asymmetric 11-grooves gratings have been designed to efficiently couple a normally incident Gaussian mode into directional SPPs. The SPPs generated by each launcher then freely propagate and recombine on the surface plasmon beamsplitter (SPBS). It is made of two identical grooves in the metallic surface, oriented at 45° with respect to the propagation direction of waves. The succession of metal and air allows a scattering process that generates both a transmitted and a reflected SPP. The SPPs then propagate towards two large outcoupling strip slits. They are decoupled into photons propagating in the glass substrate on the rear of the platform.
Surface plasmon polaritons (SPPs) result from collective oscillations of free electrons coupled to an electromagnetic field at a plane interface between a metal and a dielectric medium. As photons, SPPs can be considered either as waves or as bosonic particles [1] and they can experience striking quantum interferences such as Hong-Ou-Mandel (HOM) effect [2]. We use in this paper a plasmonic platform (Fig.1) that can convert photons into plasmons, and separate or recombine them on a plasmonic beamsplitter [3]. Single SPPs are excited using single photons created by parametric down conversion into a periodically-poled KTP crystal. The platform is placed in a Mach-Zehnder interferometer in order to vary the path difference between SPPs before impinging on the beamsplitter. The setup allows us to revisit quantum optics experiments using SPP as carriers of the quantum of energy. Using the same device, we can test the wave-particle duality, two-particle (HOM) interference and non-local control of single plasmon interference using the entanglement between a photon and a SPP [4]. In the case of the HOM experiment, we demonstrate that the losses can be used as a new degree of freedom [5]. Playing with the dephasing between transmission and reflection coefficient of the beamsplitter, we can observe a peak instead of the usually expected dip in the HOM interference (Fig.2), i.e. an anti-coalescence effect of SPP. In this talk, we will introduce the plasmonic device main features as well as the different quantum plasmonics experiments that have been performed thanks to the SPP beamsplitter. These results are essential to understand the SPP quantum behavior or to develop hybrid plasmon-photon systems for potential future applications in quantum communication mediated by SPP. [1] JM Elson and R.H. Ritchie, Phys. Rev. B 4, 4129 (1971) [2] J.S. Fakonas et al., Nat. Phot. 8, 317 (2014) [3] M.C. Dheur et al. , Sc. Advances 2, e151574 (2016) [4] M.C. Dheur et al. ArXiv 1610.07493, B. Vest et al. ArXiv 1610.07479 [5] S. Barnett et al., Phys. Rev. A 57, 2134 (1998) Fig.1: Plasmonic platform used for the quantum optics experiment (B). It consists in two SPP launchers (A), a plasmonic beamsplitter, and two slits to convert SPP to photons in the glass substrate. The plasmonic interference can thus be probed using single photon counting modules. Fig2: HOM experiment on a lossy plasmonic beamsplitter, whose complex amplitude reflection and transmission factors are denoted r and t respectively. The usual HOM dip is observed when r = it (left), a peak in the coincidence rate is shown when r = t.
At the interface of two different media such as metal and vacuum, light can couple to the electrons of the metal to form a wave that is bound to the interface. This wave is called a surface plasmon-plariton (SPP), generally characterized by intense fields that decay quickly away from the interface. Due to their unique properties, SPPs have found a broad range of applications in various areas of science, including light harvesting, medical science, energy transfer and imaging. In addition to the widely studied classical plasmonics, quantum plasmonics is also attracting considerable interest in the electromagnetics and quantum optics communities. In this thesis several new areas of investigation into quantum plasmonics is presented, focusing on entanglement mediated by SPPs in several different environments: 3D waveguides, 2D surfaces and on photonic topological insulators.\nEntanglement is an experimentally verified property of nature where pairs of quantum systems are connected in some manner such that the quantum state of each system cannot be described independently. Generating, preserving, and controlling entanglement is necessary for many quantum computer implementations. It is highly desirable to control entanglement between two multi-level emitters such as quantum dots via a macroscopic, easily-adjusted external parameter. SPPs guided by the medium, as a coupling agent between quantum dots, are highly tunable and offer a promising way to achieve having control over a SPP mediated entanglement.\nWe first consider two quantum dots placed above 3D finite length waveguides. We have restricted our consideration to two waveguides types, i.e. a metal nanowire and a groove waveguide. Our main results in this work are to show that realistic finite-length nanowire and groove waveguides, with their associated discontinuities, play a crucial role in the engineering of highly entangled states. It is demonstrated that proper positioning of the emitters with respect to the waveguide edges can lead to a significant increase in entanglement compared to the case of the emitter coupled to an infinite plasmonic waveguide. Moreover, even for the infinite-length case, discontinuities in the waveguides do not always play a detrimental role, to be more specific, an increase in entanglement compared to the unperturbed waveguides can be achieved by introducing coupling slots (engineered perturbations) into the structure.\nIn addition to 3D environments, two dimensional (2D) materials are of intense interest due to their extraordinary capabilities to manipulate reflection and transmission characteristics, and beam-forming. Some notable examples of 2D layered crystals include graphene, black phosphorus (BP) and boron nitride. Graphene in particular has received considerable attention as a promising 2D surface for many applications relating to its integrability and electronic tune-ability. Black phosphorus is also a layered material that has recently been exfoliated into its multilayers, showing good electrical transport properties and promising optical charactristics.\nMost of the previous studies of the electromagnetic response of 2D surfaces and metallic surface plasmons have considered isotropic structures with omnidirectional plasmonic surface wave propagation on the plane of these materials. Such an omnidirectional surface wave propagation does not allow for launching energy from electromagnetic source to a specific target on the surface, which is a desirable characteristic. However, an appropriate structured anisotropic surface can provide such a capability, such as an array of graphene strips. In addition, by tuning of the graphene doping it is possible to have a hyperbolic surface response. Working in this regime of surface conductivity, it is possible to launch SPPs along a specific direction, which is tunable via doping of the graphene. In this work, the electromagnetic response of anisotropic 2D surfaces has been investigated based on the analysis of the Green’s function for the surface plasmonic wave contribution of the Sommerfeld integral. The Sommerfeld integral form of the Green’s function can be time-consuming to evaluate, and here, it has been shown that for the surface waves, this integral can be evaluated efficiently as a mixture of continuous and discrete spectrums associated to the radiation of the source into the ambient space and energy coupled to the SPPs. Graphene strip arrays provide directive surface waves in the low THz regime, and unperturbed black phosphorus provides a similar response for higher frequency ranges.\nAll plasmonic devices are impacted by SPP diffraction at surface defects and discontinuities. In particular, for reciprocal materials a surface defect/discontinuity can both scatter a forward mode into a backward mode (and vice versa) and cause significant radiation/diffraction of the SPP. The presence of a backward state comes from time reversal (TR) symmetry; when broken, a backward state may be absent, and reflection at a discontinuity can be suppressed. As a result, surface energy becomes unidirectional and follows the contour of the interface. This type of system can be broadly classified as a photonic topological insulators (PTIs). The properties of PTIs are quantified by the Berry phase, Berry connection, and an invariant known as the Chern number. Also the physical meaning of the Berry phase, connection, and curvature, how these quantities arise in electromagnetic problems, and the significance of Chern numbers for unidirectional, scattering-immune surface wave propagation are discussed. The Chern numbers for the electromagnetic modes supported by a biased plasma have been calculated. It has been demonstrated that the modes supported by biased plasmas indeed possess non-trivial Chern numbers, which leads to the propagation of a topologically protected and unidirectional surface modes (energy) at the interface between the biased plasma and topologically trivial material.\nThe ability to guide the energy from one quantum dot to another one is a great advantage to achieve highly entangled states. Here, in this thesis for the first time, we investigated the unidirectional surface wave assisted entanglement in PTIs. We have investigated spontaneous and pumped entanglement of two level systems (quantum dots) in the vicinity of a photonic topological insulator interface, which supports a unidirectional SPP in the common bandgap of the bulk materials. We also have derived a master equation for quantum dots interactions in a general three-dimensional, nonreciprocal, inhomogeneous and lossy environment. The resulting entanglement is shown to be extremely robust to defects occurring in the material system.
In this presentation, we report direct evidence of the bosonic nature of SPPs in a scattering-based beamsplitter, in one of the most simple experiments of quantum optics - done using SPPs instead of photons propagating in air. A parametric down-conversion source is used to produce two indistinguishable photons, each of which is converted into a SPP on a metal-stripe waveguide and then made to interact through a semi-transparent Bragg mirror. In this plasmonic analog of the Hong-Ou-Mandel experiment, we measure a coincidence dip with a visibility of 72%, the signature that SPPs are bosons and that quantum interference is clearly involved.
Previous experiments have shown that surface plasmon polaritons (SPPs) preserve their entangled state and do not cause measurable decoherence. However, essentially all of them were done using SPPs whose dispersion was in the linear “photon-like” regime. We report in this presentation on experiments showing how transition to “true-plasmon” non-linear dispersion regime, which occurs near SPP resonance frequency, will affect quantum coherent properties of light. To generate a polarization-entangled state we utilize type-I parametric down-conversion, occurring in a pair of non-linear crystals (BiBO), glued together and rotated by 90 degrees with respect to each other. For state projection measurements, we use a pair of polarizers and single-photon avalanche diode coincidence count detectors. We interpose a plasmonic hole array in the path of down-converted light before the polarizer. Without the hole array, we measure visibility V=99-100% and Bell’s number S=2.81±0.03. To study geometrical effects we fabricated plasmonic hole arrays (gold on optically polished glass) with elliptical holes (axes are 190nm and 240nm) using focused ion beam. When we put this sample in our system we measured the reduction of visibility V=86±5% using entangled light. However, measurement using classical light gave exactly the same visibility; hence, this reduction is caused only by the difference in transmission coefficients of different polarizations. As samples with non-linear dispersion we fabricated two-layer (a-Si - Au) and three-layer (a-Si – Au – a-Si) structures on optically polished glass with different pitches and circular holes. The results of measurements with these samples will be discussed along with the theoretical investigations.
Plasmonics o ers sub-di raction confinement of light, which a ords enhanced coupling to emitter \nsystems (e.g. quantum dots). This feature makes possible a range of on-chip quantum photonic \ncomponents - most notably single-photon sources and switches. This potential use of plasmonics, \nalong with the nonlinearity provided by emitter systems, opens up quantum plasmonics \nas a viable route to realising quantum information processing. In this setting, the excitation of \nsingle surface plasmon polaritons (SPPs) on waveguides via single photons and the confirmation \nof single-photon states upon output is an important goal. In the work reported here, plasmonic \nwaveguides were experimentally probed with single photons. A measurement of the secondorder \nquantum coherence function yielded a value of g(2)(0) = 0:160 0:002. A value less than \n0.5 is indicative of single-excitation states. Furthermore, to confirm successful SPP excitation, \nthe transverse-magnetic mode restriction and exponential decay of SPPs were verified. Having \nfirmly established the ability to probe plasmonic waveguides in the classical and quantum \nregimes, quantum random number generation was implemented using a plasmonic beam splitter. \nThe random bit sequences produced passed the NIST Statisitical Test Suite once post-processed \nto correct for a slightly asymmetric beamsplitter.
Surface plasmon polaritons (SPPs) are collective excitations of free electrons propagating along a metal-dielectric interface. Although some basic quantum properties of SPPs, such as the preservation of entanglement, the wave-particle duality of a single plasmon, the quantum interference of two plasmons, and the verification of entanglement generation, have been shown, more advanced quantum information protocols have yet to be demonstrated with SPPs. Here, we experimentally realize quantum state teleportation between single photons and SPPs. To achieve this, we use polarization-entangled photon pairs, coherent photon-plasmon-photon conversion on a metallic subwavelength hole array, complete Bell-state measurements and an active feed-forward technique. The results of both quantum state and quantum process tomography confirm the quantum nature of the SPP mediated teleportation. An average state fidelity of [Formula: see text] and a process fidelity of [Formula: see text], which are well above the classical limit, are achieved. Our work shows that SPPs may be useful for realizing complex quantum protocols in a photonic-plasmonic hybrid quantum network.