Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Nextgen Electronic Technologies: Silicon to Software (ICNETS2)

Quantum computation based on Reciprocal Quantum logic

S. Narendran, J. Selvakumar

Published Mar 1, 2017• 3 citations
Publisher

Abstract

This paper gives a newfangled dimension to superconducting logic which is the successor of CMOS logic and other superconducting quantum logic. Reciprocal Quantum logic (RQL) is proposed to achieve the less memory capability. RQL is a modified version of Rapid Single Flux Quantum (RSFQ). We designed and analyzed different RQL logic like half adder, full adder, counter, and Carry Save Adder (CSA) and we achieved an increase in clock speed compared to RSFQ logic by 20%. The designs are made of AndOr and AnotB gate operation and analyzed using WRSPICE software.

DOI
10.1109/icnets2.2017.8067892

Related papers

Superconducting Logic Circuits Operating With Reciprocal Magnetic Flux Quanta

Oliver T. Oberg

Complimentary Medal-Oxide Semiconductor (CMOS) technology is expected to soon reach its fundamental limits of operation. The fundamental speed limit of about 4 GHz has already effectively been sidestepped by parallelization. This increases raw processing power but does nothing to improve power dissipation or latency. One approach for increasing computing performance involves using superconducting digital logic circuits. In this thesis I describe a new kind of superconducting logic, invented by Quentin Herr at Northrop Grumman, which uses reciprocal pairs of quantized single magnetic flux pulses to encode classical bits. In Reciprocal Quantum Logic (RQL) the data is encoded in integer units of the magnetic flux quantum. RQL gates operate without the bias resistors of previous superconducting logic families and dissipate several orders of magnitude less power. I demonstrate the basic operation of key RQL gates (AndOr, AnotB, Set/Reset) and show their self-resetting properties. Together, these gates form a universal logic set and provide memory capabilities. Experiments measuring the bit error rate of the AndOr gate extrapolated a minimum BER of 10−480 and a BER of 10−44 with 30% margins on flux biasing. I describe an analytic timing model for RQL gates which demonstrates the self-correcting timing features. From this model I derive equations for the timing behavior and operating limits. Using this timing model I ran simulations to determine correction factions for more accurate predictions at higher frequencies. Using these results, I also develop Very High Speed Integrated Circuit (VHSIC) Hardware Description Language (VHDL) models to describe the combinational logic of RQL gates. To test the timing predictions of the timing model, I performed three experiments on Nb/AlOx/Nb circuits at 4.2 K. The first measured the time of output. The second measured the operating margins of the circuit. The third measured the maximum frequency of operation for RQL circuits. Together, these three experiments showed quantitative agreement with the model for the timing output, qualitative agreement with the limits of operation, and a projected speed limit of 50 GHz for the Hypres 4.5 kA/cm2 process. To power RQL circuits I describe a new design for power splitters and combiners which minimize standing waves. I describe a new kind of Wilkinson power splitter which required numerical optimization but proved to be adequate. I experimentally tested two new designs of the power splitter. Both showed less than 10% variation in standing waves between power splitter and combiner, making it adequate for RQL circuits. I also compared these results with the S-parameters of the power network, which also indicated that the design was adequate for RQL circuits. Finally, I tested an 8-bit Kogge-Stone architecture carry-look ahead adder designed using VHDL models. The adder contained 815 Josephson junctions and was fully functional at 6.21 GHz with a latency of 1.25 clock cycles. The adder produced the correct logical output, had a measured optimal operating point within 8% of the optimal simulated operating point, and measured power margins of 1 dB. It operated best at the designed clock amplitude of 0.88 Ic and dissipated 0.570 mW of power.

•Jan 1, 2011•15 citations

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations

Energy-Efficient Local Storage Design With Superconductor Reciprocal Quantum Logic

Zuoting Chen

Superconductor single flux quantum (SFQ) technology is one of the promising candidates for energy-efficient high-performance computing. A new generation of SFQ logics, Reciprocal Quantum Logic (RQL) with no static power dissipation in bias resistors, offers an opportunity to dramatically decrease energy consumption in superconductor processors. Although several low complexity RQL processing units have already been demonstrated, the use of RQL for local storage design has not been explored yet. The objective of this dissertation is to design on-chip local storage structures such as memory, register files, and caches with RQL technology and analyze their energy efficiency, complexity, and performance characteristics. The physical chip design of these RQL storage units is not feasible at this point because both CAD tools for physical VLSI chip design and as well as a target fabrication process are under development at Northrop-Grumman Systems Corp. (Baltimore, MD) and MIT Lincoln Laboratory, respectively. In order to achieve our goal, the layout-aware cell-level design process using VHDL RQL cell library developed at the Ultra High Speed Computing Lab in Stony Brook University has been used. The SBU VHDL RQL cell library specifies the dynamic and stand-by energy consumption, latency, JJ complexity, and approximate sizes of individual cells based on the input received from the JJ-level RQL designers. Clock propagation skew and wire delays are accounted for during circuit simulation. The circuit simulation is done with Mentor Graphics design and verification tools. As a result of the work, key characteristics of the 8.5 GHz multiported RQL storage structures with their capacity in the range of 1-4 kbit have been determined. The average energy consumption of the RQL storage designs is ~3.0-9.5 fJ/bit/operation at room temperature and the cryo-cooling efficiency is 0.1%. The data from this dissertation also reveal the critical issues that need to be considered in the RQL storage design. These will be helpful for further development on superconductor VLSI design. | 124 pages

•May 1, 2015•1 citation

Demonstration of superconducting memory with passive transmission line-based reads

Randy Posey, Randall Burnett, Quentin Herr +1 more

Reciprocal Quantum Logic (RQL) is a superconducting logic family that operates at significantly lower power than conventional CMOS. RQL gate-based memories have been demonstrated, but have limited scaling due to clocked Josephson transmission line (JTL) signal propagation. Here we present a form of superconducting memory that utilizes an RQL write-path in conjunction with a faster, RF transmission-line-based read path, known as passive random access memory (PRAM).

International Symposium on Memory Systems (MEMSYS)•Sep 30, 2019•1 citation

Challenges and the status of superconducting single flux quantum technology

Naveen Kumar Katam, Jamil Kawa, Massoud Pedram

Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.

Design, Automation, and Test in Europe•Mar 1, 2019•11 citations

Towards 32-bit Energy-Efficient Superconductor RQL Processors: The Cell-Level Design and Analysis of Key Processing and On-Chip Storage Units

M. Dorojevets, Zuoting Chen, Christopher Lawrence Ayala +1 more

New superconductor single flux quantum logics with no static power dissipation in bias resistors, such as Reciprocal Quantum Logic (RQL), offer opportunities to create energy-efficient superconductor processors operating at high frequencies with ultra-low power consumption. This paper discusses the results of our work on the cell-level design and analysis of a benchmark set of 32-/64-bit RQL processor integer and floating-point units such as adders, multipliers, an arithmetic-logic unit, and an array shifter, as well as small 1-4 Kbit RQL on-chip storage components such as register files, on-chip memory, and the top level caches. Our layout-aware design process includes the complete cell-level design and approximate physical layout of the circuits followed by the VHDL simulation, verification, and energy profiling using our RQL VHDL cell library tuned to the future MIT Lincoln Laboratory 10 kA/cm2 248 nm process with 10 Nb metal layers and the minimum JJ critical current of 38 μA. Our designs have the energy efficiency of ~1.0 single-precision TFLOPS/W and '0.5 double-precision TFLOPS/W for floating-point units, and ~1-24 TOPS/W for 32-bit integer units at room temperature using the cryocooling efficiency of 0.1 % (1000 W/W). The 1-4 Kbit 32-/64-bit multi-ported scratchpad memory, register files, write-through and write-back caches designed with RQL Non-Destructive Read-Out storage cells have the average energy consumption of 3.0-9.5 fJ/bit/operation at room temperature using the cryocooling efficiency of 0.1%. While these results are very promising, more work is needed to evaluate the contribution of the energy costs of instruction scheduling and off-chip main memory access to the energy efficiency of RQL computing across a whole system.

IEEE Transactions on Applied Superconductivity•Nov 6, 2014•31 citations
This paper gives a newfangled dimension to superconducting logic which is the successor of CMOS logic and other superconducting quantum logic. Reciprocal Quantum logic (RQL) is proposed to achieve the less memory capability. RQL is a modified version of Rapid Single Flux Quantum (RSFQ). We designed and analyzed different RQL logic like half adder, full adder, counter, and Carry Save Adder (CSA) and we achieved an increase in clock speed compared to RSFQ logic by 20%. The designs are made of AndOr and AnotB gate operation and analyzed using WRSPICE software.
Complimentary Medal-Oxide Semiconductor (CMOS) technology is expected to soon reach its fundamental limits of operation. The fundamental speed limit of about 4 GHz has already effectively been sidestepped by parallelization. This increases raw processing power but does nothing to improve power dissipation or latency. One approach for increasing computing performance involves using superconducting digital logic circuits. In this thesis I describe a new kind of superconducting logic, invented by Quentin Herr at Northrop Grumman, which uses reciprocal pairs of quantized single magnetic flux pulses to encode classical bits. In Reciprocal Quantum Logic (RQL) the data is encoded in integer units of the magnetic flux quantum. RQL gates operate without the bias resistors of previous superconducting logic families and dissipate several orders of magnitude less power. I demonstrate the basic operation of key RQL gates (AndOr, AnotB, Set/Reset) and show their self-resetting properties. Together, these gates form a universal logic set and provide memory capabilities. Experiments measuring the bit error rate of the AndOr gate extrapolated a minimum BER of 10−480 and a BER of 10−44 with 30% margins on flux biasing. I describe an analytic timing model for RQL gates which demonstrates the self-correcting timing features. From this model I derive equations for the timing behavior and operating limits. Using this timing model I ran simulations to determine correction factions for more accurate predictions at higher frequencies. Using these results, I also develop Very High Speed Integrated Circuit (VHSIC) Hardware Description Language (VHDL) models to describe the combinational logic of RQL gates. To test the timing predictions of the timing model, I performed three experiments on Nb/AlOx/Nb circuits at 4.2 K. The first measured the time of output. The second measured the operating margins of the circuit. The third measured the maximum frequency of operation for RQL circuits. Together, these three experiments showed quantitative agreement with the model for the timing output, qualitative agreement with the limits of operation, and a projected speed limit of 50 GHz for the Hypres 4.5 kA/cm2 process. To power RQL circuits I describe a new design for power splitters and combiners which minimize standing waves. I describe a new kind of Wilkinson power splitter which required numerical optimization but proved to be adequate. I experimentally tested two new designs of the power splitter. Both showed less than 10% variation in standing waves between power splitter and combiner, making it adequate for RQL circuits. I also compared these results with the S-parameters of the power network, which also indicated that the design was adequate for RQL circuits. Finally, I tested an 8-bit Kogge-Stone architecture carry-look ahead adder designed using VHDL models. The adder contained 815 Josephson junctions and was fully functional at 6.21 GHz with a latency of 1.25 clock cycles. The adder produced the correct logical output, had a measured optimal operating point within 8% of the optimal simulated operating point, and measured power margins of 1 dB. It operated best at the designed clock amplitude of 0.88 Ic and dissipated 0.570 mW of power.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested
Superconductor single flux quantum (SFQ) technology is one of the promising candidates for energy-efficient high-performance computing. A new generation of SFQ logics, Reciprocal Quantum Logic (RQL) with no static power dissipation in bias resistors, offers an opportunity to dramatically decrease energy consumption in superconductor processors. Although several low complexity RQL processing units have already been demonstrated, the use of RQL for local storage design has not been explored yet. The objective of this dissertation is to design on-chip local storage structures such as memory, register files, and caches with RQL technology and analyze their energy efficiency, complexity, and performance characteristics. The physical chip design of these RQL storage units is not feasible at this point because both CAD tools for physical VLSI chip design and as well as a target fabrication process are under development at Northrop-Grumman Systems Corp. (Baltimore, MD) and MIT Lincoln Laboratory, respectively. In order to achieve our goal, the layout-aware cell-level design process using VHDL RQL cell library developed at the Ultra High Speed Computing Lab in Stony Brook University has been used. The SBU VHDL RQL cell library specifies the dynamic and stand-by energy consumption, latency, JJ complexity, and approximate sizes of individual cells based on the input received from the JJ-level RQL designers. Clock propagation skew and wire delays are accounted for during circuit simulation. The circuit simulation is done with Mentor Graphics design and verification tools. As a result of the work, key characteristics of the 8.5 GHz multiported RQL storage structures with their capacity in the range of 1-4 kbit have been determined. The average energy consumption of the RQL storage designs is ~3.0-9.5 fJ/bit/operation at room temperature and the cryo-cooling efficiency is 0.1%. The data from this dissertation also reveal the critical issues that need to be considered in the RQL storage design. These will be helpful for further development on superconductor VLSI design. | 124 pages
Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.
New superconductor single flux quantum logics with no static power dissipation in bias resistors, such as Reciprocal Quantum Logic (RQL), offer opportunities to create energy-efficient superconductor processors operating at high frequencies with ultra-low power consumption. This paper discusses the results of our work on the cell-level design and analysis of a benchmark set of 32-/64-bit RQL processor integer and floating-point units such as adders, multipliers, an arithmetic-logic unit, and an array shifter, as well as small 1-4 Kbit RQL on-chip storage components such as register files, on-chip memory, and the top level caches. Our layout-aware design process includes the complete cell-level design and approximate physical layout of the circuits followed by the VHDL simulation, verification, and energy profiling using our RQL VHDL cell library tuned to the future MIT Lincoln Laboratory 10 kA/cm2 248 nm process with 10 Nb metal layers and the minimum JJ critical current of 38 μA. Our designs have the energy efficiency of ~1.0 single-precision TFLOPS/W and '0.5 double-precision TFLOPS/W for floating-point units, and ~1-24 TOPS/W for 32-bit integer units at room temperature using the cryocooling efficiency of 0.1 % (1000 W/W). The 1-4 Kbit 32-/64-bit multi-ported scratchpad memory, register files, write-through and write-back caches designed with RQL Non-Destructive Read-Out storage cells have the average energy consumption of 3.0-9.5 fJ/bit/operation at room temperature using the cryocooling efficiency of 0.1%. While these results are very promising, more work is needed to evaluate the contribution of the energy costs of instruction scheduling and off-chip main memory access to the energy efficiency of RQL computing across a whole system.