This thesis presents optical measurements used to explore nanophotonic circuits composed of III-V semiconductors with embedded quantum dots.The focus of this work is to investigate issues related to the scalability and performance of these structures.A technique to register the position of a quantum dot, relative to pre-fabricated registration markers, with the aid of a solid immersion lens, is developed.The variance in the repeatedly registered position of the quantum dot is shown to be significantly reduced as a result of the solid immersion lens, compared with positions registered without a solid immersion lens.The total error of the deterministic fabrication, using position registered quantum dots, is small when compared to the size of optical fields.Confirmation of this has been 'no cloning' theorem.With significant work still remaining before a scalable nanophotonic quantum computer may be realised, the interest in long distance transmission of photons as flying qubits is primarily within the field of quantum key distribution.This area of research relies on the no cloning theorem and makes use of entanglement to transfer information between two locations in a secure manor.Recent achievements have shown through single photon correlation measurements that the quantum state of the photon can be preserved at √2 ⁄ |+1⟩ ± |-1⟩.As the anisotropy in the quantum dot is between the [110] and [110] crystal axis, photons emitted as a result of the recombination of these mixed states is linearly polarised along either of these crystal axes.Recently, the linearly polarised
This thesis presents optical measurements used to explore nanophotonic circuits composed of III-V semiconductors with embedded quantum dots.The focus of this work is to investigate issues related to the scalability and performance of these structures.A technique to register the position of a quantum dot, relative to pre-fabricated registration markers, with the aid of a solid immersion lens, is developed.The variance in the repeatedly registered position of the quantum dot is shown to be significantly reduced as a result of the solid immersion lens, compared with positions registered without a solid immersion lens.The total error of the deterministic fabrication, using position registered quantum dots, is small when compared to the size of optical fields.Confirmation of this has been 'no cloning' theorem.With significant work still remaining before a scalable nanophotonic quantum computer may be realised, the interest in long distance transmission of photons as flying qubits is primarily within the field of quantum key distribution.This area of research relies on the no cloning theorem and makes use of entanglement to transfer information between two locations in a secure manor.Recent achievements have shown through single photon correlation measurements that the quantum state of the photon can be preserved at √2 ⁄ |+1⟩ ± |-1⟩.As the anisotropy in the quantum dot is between the [110] and [110] crystal axis, photons emitted as a result of the recombination of these mixed states is linearly polarised along either of these crystal axes.Recently, the linearly polarised
New technologies based on the properties of quantum mechanics promise to revolutionise the way information is processed by outperforming what is possible using classical devices. Examples include massively parallel processing using quantum computers, verifiably secure communication using quantum cryptography, and measurement with sensitivity beyond classical limitation with quantum metrology. Realising the full potential of these technologies necessitates the ability to communicate quantum information over large distances, a key requirement for future quantum networks. However, developing practical implementations of long-distance quantum communication is challenging as it necessitates three major ingredients: light-matter interfaces, elementary quantum operations, and quantum memories. This thesis describes work that has been undertaken to address these requirements using semiconductor nanotechnology. We have first demonstrated that single InAs quantum dots embedded inside conventional diode structures constitute high-fidelity controllable interfaces between optical qubits and solid-state qubits. Indeed, the polarisation state of a photon was transferred into the spin state of an electron-hole pair and eventually restored through radiative recombination of the electron and the hole with a fidelity up to 95%. Moreover, spins were manipulated using subnanosecond modulation of a vertical electric field applied to the quantum dots. By controlling this electrical modulation, we demonstrated elementary phase-shift and spin-flip gate operations with near-unity fidelities. An electron-hole pair confi ned in a single quantum dot has a short radiative lifetime limiting therefore its use as an excitonic quantum memory. The solution we proposed was to use a quantum dot molecule to control the spatial separation of the electron and the hole and therefore prevent their recombination. Comprehensive studies of electric field eff ects upon the photoluminescence of quantum dot molecules lead to a clear understanding and a good control over their physical properties. Single photons were stored in individual quantum dot molecules up to 1μs and read out on a subnanosecond time scale. Moreover, the circular polarisation of individual photons was transferred into the spin state of electron-hole pairs with a fidelity above 90%, which does not degrade for storage times up to the 12.5 ns repetition period of the experiment. Our work on single quantum dots could be extended in the near future to allow for two-qubits quantum operations by con fining a second electron-hole pair to be electrically manipulated. Storage of a superposition of spin states in a quantum dot molecule should also be possible if the spin states are made degenerate, which is feasible using the electric fi eld dependence of the energy splitting between the spin states discussed in this thesis. We believe that combining both approaches will lead to the development of a controllable multi-qubit quantum memory for polarised light, a building block for long distance quantum communication based on semiconductor nanotechnology.
Efficient collection of photons from quantum memories, such as quantum dots (QDs) and nitrogen vacancy (NVs) centers in diamond, is essential for various quantum technologies.This thesis describes the design, fabrication, and utilization of novel photonic structures and systems to achieve potentially world-record photon collection from quantum dots.This technique can also be applied to NVs in diamond in the near future.Also, the NV-charged state has second-scale coherence times at room temperature that make it a promising candidate for solid state memories in quantum computers and quantum repeaters.NV-is an individually addressable qubit system that can be optically initialized, manipulated, and measured.On-chip entanglement generation would be the basis of scalability for quantum information processing technologies.These properties have enabled recent demonstrations of heralded quantum entanglement and teleportation between two separated NV centers.To improve the entanglement probability in such schemes, it is imperative to improve the efficiency with which single photons from a NV center can be guided into a low-loss single-mode waveguide.As such, a second component of this thesis focuses on the development of a photonic integrated circuit based on aluminum nitride that would incorporate pre-selected, long-lived NV center quantum memories as well as pre-selected, highperformance superconducting nanowire single-photon detectors (SNSPDs).This hybrid device would have the capability to perform on-chip entanglement of photons from separate quantum memories to build up a quantum repeater necessary for longdistance quantum communication and distributed quantum computing.
In the past decades quantum optics has been at the forefront of quantum innovative technologies. For practical applications, scalable platforms for implementation of quantum optical circuits are vital. This thesis presents two new platforms for scalable implementation of quantum optical circuits, namely, modular approach and monolithic integration. Here, we take the first steps towards the integration of three main elements of every quantum optics circuits: Single-photon emitters, single-photon detectors, and quantum logics. Until now, most quantum optical circuits used separate platforms for single-photon generation and detection. The main challenge in the integration of these technologies, which have different requirements, has slowed down the research in the field. Here, we integrate sources and detectors by first fabricating the devices on their own platform and then transferring and combining them together. Plasma enhanced chemical vapor deposition of silicon nitride followed by etching optical waveguides connect these elements. Removing the Poissonian optical excitation field from the quantum circuit is necessary for integration. Classical optical excitation can be avoided if the sources are electrically pumped. However, fabrication of high-quality electrically pumped sources, suitable for integration, has been limited. The experiments described in chapter 4 are our first step towards addressing the mentioned problem. Defect-free nanowires are grown on <100> direction and their optoelectronic performance are characterized. Nanowire quantum dots, thanks to their waveguiding, purity, coherence and their potentials for deterministic integration with other optical circuits, are promising single-photon sources for on-chip quantum optics. However, precise control of the emission energy of the quantum dots by growth has not become possible yet. Chapter 5 describes a method for on-chip tuning of emission energy of nanowire quantum dots using strain fields. We show the emission energy of independent nanowire quantum dots can be brought into degeneracy without affecting their single-photon emission properties. The quantum optical components have to be routed and connected together to form functional circuits. On a chip, this is usually carried out using optical waveguides. Moreover, manipulation of single photons has to be done in a scalable fashion. Again optical waveguides and ring resonators are very good candidates for this task. Therefore, understanding the behavior of these circuits such as their losses, polarization dependence, and temperature behavior is important. The experiment described in chapter 6 studies the behavior of plasma enhanced silicon nitride waveguides in cryogenic temperatures. We concluded in this chapter that due to weak thermo-optic sensitivity of silicon nitride at cryogenic temperatures, the available thermal budget on the system should be carefully considered. An important step in achieving a scalable platform for quantum optical circuits is deterministic and efficient integration of single-photon sources. In chapter 7, we demonstrate successful integration of III-V nanowire quantum dots with silicon nitride waveguides. The nanowires are deterministically selected and transferred from the original growth chip to the new substrate where they are integrated with low-loss silicon nitride waveguides. Our measurements show that the integrated sources preserve their high quality emission properties. In chapter 8, we describe an alternative approach: amodular method for scalable quantum optics. The proposed technique is based on coupling the single-photon from sources into optical fibers where the photons can be processed and then fed into the single-photon detectors. This approach has high flexibility and is easier to implement but as described in the chapter, at the moment, losses in the interfaces between optical fibers and single-photon sources are a major limiting factor. We conclude the thesis with some possible future directions and exciting new results on integration of single-photon detectors with sources and waveguides. Finally, primary results on on-chip single-photon filtering and removal of the optical excitation field are demonstrated.
For future quantum technologies and in particular for quantum architecture systems, one needs to consider scalability and reproducibility in order to be able to handle and add easily as many qubits of information as possible on a given platform. Quantum coherence and quantum information are fragile and thus requires the need for many qubits to be created, to interact and quantum information to be preserved. Currently there are either very good qubits in terms of fidelity but poor scalability or very good scalability but poor fidelity thus requiring more qubits to compensate. Most of the current platforms are in solid-state physics such as superconducting, dopants in silicon, quantum dots in III-V semiconductors or defects in diamond. The main interest for condensed matter systems is the fact that it is potentially scalable as integration is possible in the future, already demonstrated in the ‘classical’ semiconductor industry. Nevertheless, there are some true challenges in controlling and understanding the mechanisms of decoherence, losses and unwanted effects in these ‘dirty’ systems. As quantum technologies require ultimate control of quantum effects such as maintaining quantum coherence, quantum superposition and entanglement, it pushes towards deeper knowledge of underlying material and condensed matter physics. Photons are of particular interest as they are good carriers of quantum information and one aim is to explore a fully integrated photonic quantum circuit which would be a hybrid system made of stationary solid-state qubits (we will call them quantum emitters) coupled together via single photons travelling within a common optical bus that is photonics-ready for quantum communications within a network of quantum nodes. In this presentation, we will present our latest developments and results towards the integration of quantum emitters with photonic structures with nanosize features. In the first part, our platform is described which consists of glass and thus directly compatible with optical fibres. It is based on the technique of exchanged ions within the glass in order to create locally a particular confinement of the light. The next part will concern our latest results on two different quantum emitters. The first one is based on perovskite nanocristals that can be synthetised chemically and giving rise to quantum optics-type of emitters. The second one is based on the so-called silicon-vacancy defect centre in nanodiamonds. These emitters are produced by the high-pressure/high-temperature method and lead to promising results for quantum technologies. Finally, the last part will treat the nanophotonics approaches in order to couple efficiently these emitters with our platform.
In recent years, research on integrated quantum circuits has developed rapidly and exciting results have been achieved. The overarching goal of this emerging research direction in the field of modern quantum technology is the scalable integration of quantum functionality on robust chips. Such chips can work independently of one another, but it is even more interesting to develop them modularly for integration into larger quantum networks, thereby linking quantum computation and quantum communication in the same framework. In this context, the ongoing development and further optimization of integrated quantum circuits aim, inter alia, to achieve a quantum advantage in the area of quantum computing and to pave the way for multipartite quantum networks. The functionality of such chips is essentially based on single-photon operations, such as interference at beam splitters in combination with phase shifters in the field of linear optical quantum computing and Bell-state measurements for entanglement swapping in long-distance quantum networks. While individual functionalities such as CNOT gates and more complex quantum computing operations such as boson sampling in a combination of waveguide chips and external photon sources and detectors were successfully demonstrated, the field is currently facing the major challenge of integrating all necessary components monolithically on chip in order to exploit the full potential of integrated quantum nanophotonics. The present Perspective discusses the status and the present challenges of integrated quantum nanophotonics based on on-demand single-photon emitters and gives an outlook on required developments to enter the next level of fully functional quantum circuits for photonic quantum technology.
Very recently, the interest for quantum technologies by the scientific community and industry has strongly increased. Different types of implementations have been proposed as a practical implementation for a quantum bit as trapped atoms, superconducting qubits and single photons. In particular, we are interested in using single photons and single spins in solid state host matrices such as diamond (nanodiamonds or membranes). Integration of nanosources of light is currently a major bottleneck preventing the realisation of all-photonic chips for quantum technologies and nanophotonics applications. Nanophotonics and integrated optics are vast growing fields with huge market potentials in particular for quantum technologies. Ideally, one needs optical circuitry, on-chip photodetection and on-chip generation of quantum states of light (single photons, entangled photons…). We want to present our recent work on using integrated optics that can offer an easier and robust way to create fixed and compact quantum circuits that can be on chip and scalable. In this context, the coupling between waveguides and single photon emitters is critical. The goal of our research is to efficiently couple single photon emitters with a new platform made of optical glass waveguides. To achieve this goal, several paths are undertaken such as the use of dielectric and plasmonic structuration in order to increase the light interaction with the waveguide or to develop fabrication techniques to insert the emitters directly inside the guide (for nanodiamonds). We will show what is our current state of the art for placing single emitters at the right place on our optical waveguides made of ion-exchange in glass and in particular what can be done to improve our first promising results in order to get near unity coupling between the optical bus and single photon emitters. We will show first results with semiconductor nanocrystals (NCs) but also using nitrogen-vacancy defects in diamond either under nanodiamond form or in thin membranes.