International Conference on Information and Digital Technologies (IDT)
Comparison of various error-detecting and error-correcting encodings of reversible automata built from irreversible state tables using EPOE circuits with EXOR lattices
This paper presents a new approach to synthesize reversible (quantum permutative) automata from standard state tables. It uses various variants of error-detecting and error-correcting encodings. Next, a combination of recently introduced “EPOE circuits” as well as EXOR Lattices are used for synthesis. The goal is to compare the costs of various encodings and synthesis methods for the same machine, especially strongly unspecified one.
This paper presents a new approach to synthesize reversible (quantum permutative) automata from standard state tables. It uses various variants of error-detecting and error-correcting encodings. Next, a combination of recently introduced “EPOE circuits” as well as EXOR Lattices are used for synthesis. The goal is to compare the costs of various encodings and synthesis methods for the same machine, especially strongly unspecified one.
This paper introduces new algorithms to synthesize reversible functions using EXOR-sum of Products-of-EXOR-sums (EPOE) structures. The motivation for using these structures is to reduce the number of as well as the sizes of multiple controlled Toffoli gates, and thus the quantum cost. To achieve these reductions the paper generalizes from existing 2-level AND-EXOR structures (ESOP) commonly used in reversible logic to a mixture of 3-level EXOR-AND-EXOR structures and ESOPs. Our approach can be applied to reversible and permutative quantum circuits to synthesize single output functions on to an output line, with no additional ancilla bits. A comparison of the ESOP minimizer EXORCISM-4 and two variants of the EPOE minimizer, called EPOEM-1s and EPOEM-2, is presented. The results show that EPOE circuits do in fact achieve the above-stated cost reductions, in particular when expressed in terms of Maslov's quantum cost, the metric commonly used in quantum circuit synthesis.
We present a new approach to the synthesis of quantum automata. In previous research, reversible quantum automata were designed from tabular specifications or state graphs, and minimum length codes, which lead to circuits with Toffoli gates with high numbers of inputs and thus to high quantum costs. This paper is the first to present a method to synthesize Sequential Quantum Circuits directly from flowcharts. In this paper, we directly map flowcharts to reversible/quantum circuits, using only inverters, 2*2 Feynman gates and 3*3 Toffoli gates, and thus reducing quantum costs. Our method has been confirmed by experiments on several benchmarks of practical flowcharts.
Reversible logic circuits have been historically motivated by theoretical research in low-power, and recently attracted interest as components of the quantum algorithm, optical computing and nanotechnology. However due to the intrinsic property of reversible logic, traditional irreversible logic design and synthesis methods cannot be carried out. Thus a new set of algorithms are developed correctly to synthesize reversible logic circuit. This paper presents a comprehensive literature review with comparative study on heuristic based reversible logic synthesis. It reviews a range of heuristic based reversible logic synthesis techniques reported by researchers (BDD-based, cycle-based, search-based, non-search-based, rule-based, transformation-based, and ESOP-based). All techniques are described in detail and summarized in a table based on their features, limitation, library used and their consideration metric. Benchmark comparison of gate count and quantum cost are analysed for each synthesis technique. Comparing the synthesis algorithm outputs over the years, it can be observed that different approach has been used for the synthesis of reversible circuit. However, the improvements are not significant. Quantum cost and gate count has improved over the years, but arguments and debates are still on certain issues such as the issue of garbage outputs that remain the same. This paper provides the information of all heuristic based synthesis of reversible logic method proposed over the years. All techniques are explained in detail and thus informative for new reversible logic researchers and bridging the knowledge gap in this area.
This paper introduces a new synthesis approach called Products of EXOR-sums (POE) and demonstrates its utility when employed in an Exclusive-Or-Sum-of-Products (ESOP) based algorithm for reversible and permutative quantum circuits restricted to single output functions. Unlike previous ESOP approaches such as EXORCISM-4 which realize functions as an EXOR-ed sum of product literals, this new algorithm realizes functions as an EXOR-ed sum of POEs (EPOE). A comparison of EXORCISM-4 and EPOE circuits shows that the latter approach often produces circuits with significantly lower quantum costs.
We use bit operation to construct the novel and perfect Hash function and present an efficient algorithm which can construct optimal quantum reversible logic circuits with various types of gates by using the Hash table and produce quantum circuits with minimal cost in theory. Judging by the internationally recognized reversible functions of three variables, the algorithm not only synthesizes all optimal reversible logic circuits, but also runs extremely faster than other ones. The experimental results show that the average speed of the algorithm which synthesizes circuit with minimum length is 69.8 times that of currently best result [9].
Summary form only given, as follows. With the increasing emphasis on low-power design and quantum computation, research activities in the area of reversible logic synthesis and testing have gained momentum over the last couple of decades. It is expected that reversible logic will provide us with a viable alternative to building ultra-low power circuits and systems in not too distant future. In the classical works for synthesis of reversible circuits, gate libraries comprising of standard reversible gates like NOT, CNOT, TOFFOLI, FREDKIN, etc. are considered. To evaluate the goodness of a synthesized netlist, various metrics such as gate count, quantum cost, and equivalent transistor cost have been considered by various researchers. The synthesis approaches that have been reported can be broadly categorized into three groups: (a) exact synthesis approaches which try to obtain optimal reversible gate netlists, but can be used for small circuits only, (b) heuristic based approaches which try to utilize some domain knowledge intelligently to reduce the complexity of search, and can be used for somewhat larger circuits, and (c) synthesis approaches that rely on higher level functional representations like binary decision diagram (BDD) or exclusive sum-ofproducts (ESOP). The last approach is scalable to larger circuits (with 200 inputs or more), however, the synthesized netlist is not optimal and various rule-based heuristic approaches have been proposed to minimize the cost. There have been works also that report techniques for implementing sequential circuits with reversible properties, which will be useful for building complex systems containing finite-state machines. There are various transformations that are carried out as part of cryptographic algorithms that are inherently reversible in nature. For instance, any block cipher that uses a key K to transform a plaintext P into a ciphertext C during encryption must be reversible, because decryption will be doing just the reverse (C to P). Also, in standard symmetric block ciphers like DES or AES, there is a combinational block called substitution box or S-box which is also reversible in nature. In AES, the S-box has 8 inputs and 8 outputs, and implements a one-to-one onto mapping. The same reversibility requirements hold for stream ciphers and public-key ciphers like RSA. Although not much work has been carried out in the area of reversible implementations of cryptographic algorithms, this can be a very good area for future research. Similar considerations hold for various coding and decoding techniques used in communication, which are also inherently reversible in nature. Some examples of such coding/decoding are Manchester, Differential Manchester, Bipolar AMI, 4B/5B, 8B/10B, Hamming error correcting code, etc. All these techniques can potentially be implemented using reversible logic circuits. Specific case studies of some of the areas as mentioned will be reported, with synthesis results.