Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

New Journal of Physics

Zeeman deceleration beyond periodic phase space stability

Jutta Toscano, Atreju Tauschinsky, Katrin Dulitz, Chris Rennick, Brianna R. Heazlewood, T. P. Softley

Published Aug 16, 2017• 12 citations
Publisher

Abstract

In Zeeman deceleration, time-varying spatially inhomogeneous magnetic fields are used to create packets of translationally cold, quantum-state-selected paramagnetic particles with a tuneable forward velocity, which are ideal for cold reaction dynamics studies. Here, the covariance matrix adaptation evolutionary strategy is adopted in order to optimise deceleration switching sequences for the operation of a Zeeman decelerator. Using the optimised sequences, a 40% increase in the number of decelerated particles is observed compared to standard sequences for the same final velocity, imposing the same experimental boundary conditions. Furthermore, we demonstrate that it is possible to remove up to 98% of the initial kinetic energy of particles in the incoming beam, compared to the removal of a maximum of 83% of kinetic energy with standard sequences. Three-dimensional particle trajectory simulations are employed to reproduce the experimental results and to investigate differences in the deceleration mechanism adopted by standard and optimised sequences. It is experimentally verified that the optimal solution uncovered by the evolutionary algorithm is not merely a local optimisation of the experimental parameters—it is a novel mode of operation that goes beyond the standard periodic phase stability approach typically adopted.

DOI
10.1088/1367-2630/aa7ef5

Related papers

Cold state-selected radicals for the study of low temperature chemistry

Jutta Toscano

Generating a controllable and pure source of molecular free-radicals or open-shell atoms has been one of the primary barriers hindering the detailed study of radical processes in the laboratory. In this thesis, a novel source of state-selected radicals -- composed of a Zeeman decelerator interfaced with a newly-designed magnetic guide -- is introduced. This tuneable source generates a pure beam of velocity-selected hydrogen atoms that will enable the study of radical interactions with exceptional control over the properties of the radical species. In Zeeman deceleration, time-varying spatially inhomogeneous magnetic fields are used to create packets of translationally cold, quantum-state-selected paramagnetic particles with a tuneable forward velocity, which are ideal for cold reaction dynamics studies. In a proof-of-principle experiment, the Zeeman deceleration of nitrogen atoms in the metastable 2D5/2 state from 460 to 410 m/s is demonstrated for the first time. The covariance matrix adaptation evolutionary strategy (CMA-ES) is adopted in order to optimise deceleration switching sequences for the operation of a 12-stage Zeeman decelerator. Using the optimised sequences, a 40% increase in the number of decelerated H(2S1/2) atoms is observed compared to standard sequences for the same final velocity, imposing the same experimental boundary conditions. Furthermore, up to 98% of the initial kinetic energy of particles in the incoming beam is removed by the optimised sequences, compared to the removal of a maximum of 83% of kinetic energy with standard sequences. Three-dimensional particle-trajectory simulations show that the optimal solution uncovered by the evolutionary algorithm is not merely a local optimisation of the experimental parameters -- it is a new mode of operation that goes beyond the standard periodic phase stability approach typically adopted. A novel magnetic guide is designed and constructed to purify the post-deceleration beam. Only radicals with a selected velocity are transmitted through the guide; all other components of the incoming beam (radical species travelling at other velocities, precursor molecules and seed gases) are removed. The guide is composed of four Halbach arrays -- hexapolar focusing elements -- and two skimming blades. The relative positions of these components can be adjusted to tune the properties of the resulting beam and to optimise transmission for a given velocity. Experimental measurements of Zeeman-decelerated H atoms transmitted through the guide, combined with extensive simulations, show that the magnetic guide successfully removes 99% of H atoms travelling outside the narrow target velocity range.

•Jan 1, 2018•0 citations

Model for the overall phase-space acceptance in a Zeeman decelerator

Katrin Dulitz, Nicolas Vanhaecke, T. P. Softley

We present a formalism to calculate phase-space acceptance in a Zeeman decelerator. Using parameters closely mimicking previous Zeeman deceleration experiments, this approach reveals a velocity dependence of the phase stability which we ascribe to the finite rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. It is shown that changing the current switch-off times (characterized by the reduced position of the synchronous particle ${\ensuremath{\kappa}}_{0}$) as the sequence progresses, so as to maintain a constant mean acceleration per pulse, can lead to a constant phase stability and hence a beam with well-defined characteristics. We also find that the time overlap between fields of adjacent coils has an influence on the phase-space acceptance. Previous theoretical and experimental results [A. W. Wiederkehr et al., Phys. Rev. A 82, 043428 (2010); J. Chem. Phys. 135, 214202 (2011).] suggested unfilled regions in phase space that influence particle transmission through the decelerator. Our model provides a means to directly identify the origin of these effects due to coupling between longitudinal and transverse dynamics. Since optimum phase stability is restricted to a rather small parameter range in terms of the reduced position of the synchronous particle ${\ensuremath{\kappa}}_{0}$, only a limited range of final velocities can be attained using a given number of coils. We evaluate phase stability for different Zeeman deceleration sequences, and by comparison with numerical three-dimensional particle-trajectory simulations, we demonstrate that our model provides a valuable tool to find optimum parameter sets for improved Zeeman deceleration schemes. An acceleration-deceleration scheme is shown to be a useful approach to generating beams with well-defined properties for variable-energy collision experiments. More generally, the model provides significant physical insights that are applicable to other types of particle decelerators with finite rise and fall time fields.

arXiv:1501.02204•Physical Review A•Jan 22, 2015•11 citations

Phase stability in a multistage Zeeman decelerator

A. W. Wiederkehr, S. D. Hogan, Frédéric Merkt

The phase stability of a multistage Zeeman decelerator is analyzed by numerical particle-trajectory simulations and experimental measurements. A one-dimensional model of the phase stability in multistage Stark deceleration [Bethlem et al., Phys. Rev. Lett. 84, 5744 (2000)] has been adapted to multistage Zeeman deceleration and compared with one- and three-dimensional particle-trajectory simulations, including the analysis of the effect of finite switch-on and -off times of the deceleration pulses. The comparison reveals that transverse effects in the decelerator lead to a considerable reduction of the phase-space acceptance at low values of the phase angle and an enhancement at high values. The optimal combinations of phase angles and currents with which a preset amount of kinetic energy can be removed from atoms and molecules in a pulsed supersonic beam using a multistage decelerator are determined by simulation. Quantitative analysis of the phase-space acceptance within a given volume reveals that for our decelerator (8 $\mathrm{\ensuremath{\mu}}\mathrm{s}$ switch-off time) optimal conditions are achieved for values of the phase angle between ${45}^{\ifmmode^\circ\else\textdegree\fi{}}$ and ${55}^{\ifmmode^\circ\else\textdegree\fi{}}$. This conclusion is examined and confirmed by experimental measurements using deuterium atoms. Alternative approaches to generate optimal deceleration pulse sequences, such as the implementation of evolutionary algorithms or the use of higher-order modes of the decelerator, are discussed.

Physical Review A•Oct 25, 2010•32 citations

Towards the study of cold chemical reactions using Zeeman decelerated supersonic beams

Katrin Dulitz

Zeeman deceleration is an experimental technique which allows for the manipulation of open-shell atoms and molecules in a supersonic beam thus producing mK-cold, velocity-tunable beams of particles in selected quantum states. The method relies on the Zeeman interaction between paramagnetic particles and time-varying, inhomogeneous magnetic fields generated by pulsing high currents through an array of solenoid coils. This thesis describes the construction and implementation of a supersonic beam setup including a 12-stage Zeeman decelerator. The Zeeman decelerator follows an original design that makes it possible to replace individual deceleration coils. Using ground-state hydrogen atoms as a test system, it is shown that the transverse acceptance in a Zeeman decelerator can be significantly increased by generating a rather low, temporally varying quadrupole field in one of the solenoid coils. An electron-impact source was constructed and optimised enabling, for the first time, the Zeeman deceleration of metastable helium atoms in the 23S1 state, with an up to 40 % decrease in the kinetic energy of the beam. It is shown that the pulse duration for electron-impact excitation needs to be matched to the acceptance of the decelerator in order to attain a good contrast between the decelerated and undecelerated parts of the beam. Experimental results are rigorously analysed and interpreted using three-dimensional numerical particle trajectory simulations. A phase-space model provides, for the first time, a means to estimate the six-dimensional phase-space acceptance in a Zeeman decelerator and to find optimum parameter sets for improved Zeeman deceleration schemes. The approach also reveals a hitherto unconsidered velocity dependence of the phase stability which is ascribed mainly to the rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. In the future, it is planned to combine the Zeeman decelerator with a source of cold atomic and molecular ions to study chemical collisions at low temperatures. A hybrid magnetic guide consisting of permanent magnet assemblies (Halbach arrays) in hexapole configuration and a set of current-carrying wires is proposed and simulated as an interface between these setups. The design promises very efficient velocity selection, a high degree of quantum-state selection and a nearly complete removal of residual carrier gas. Prospects for using magnetic hexapole focusing in front of the Zeeman decelerator are discussed. The work represents a major step towards the study and control of chemical reactivity of paramagnetic species in the low-temperature regime and it will help in the testing of fundamental chemical reaction theories.

•Jan 1, 2014•3 citations

Multistage Zeeman deceleration of atoms and molecules

A. W. Wiederkehr

A modular multistage Zeeman decelerator consisting of an array of solenoids has been developed to control the velocity of cold, paramagnetic atoms and molecules in supersonic beams. The translational motion these atoms and molecules was manipulated with high precision by exploiting the interaction between their magnetic moments and timedependent inhomogeneous magnetic elds. Deceleration was achieved by pulsing high currents (up to 300 A) through the solenoids of the decelerator with pulse sequences calculated to preserve the phase-space density of the atomic and molecular samples while removing a preset amount of kinetic energy. For the operation of the multistage Zeeman decelerator, solenoids and electronic units were developed to generate strong magneticeld pulses (> 2 T) with rise and fall times of only a few microseconds. An accurate three-dimensional particle-trajectory simulation program has been developed to analyze the deceleration process and optimize its e ciency. This software was thoroughly tested by systematic comparison with experimental results and enabled, in combination with measurements, the complete characterization of the spatial and velocity distributions of the decelerated and trapped atoms for di erent sets of experimental conditions. The program was essential to achieve a complete interpretation of the dynamics of the deceleration process and to devise a strategy to e ciently load the decelerated atoms and molecules into magnetic quadrupole traps. In a rst experiment, hydrogen atoms seeded in a supersonic expansion of Kr have been decelerated from an initial velocity of 435 m/s to nal velocities as low as 107 m/s in a 12-stage Zeeman decelerator. The operation of the decelerator has been analyzed by comparing the results of numerical particle-trajectory simulations with those of independent measurements of the velocity distribution by ion time-ofight mass spectrometry following photoionization of the decelerated atoms. The velocity distribution of the decelerated atom cloud was found to have a half width at half maximum of 25± 12 m/s corresponding to a temperature of ∼ 40 mK. The phase stability of the multistage-Zeeman-deceleration process has been investigated by numerical particle-trajectory simulations and experimental measurements on deuterium atoms in a 24-stage Zeeman decelerator. A one-dimensional analytical model of the phase stability in a multistage Zeeman decelerator was adapted from a one-dimensional model of phase stability in a multistage Stark decelerator and compared with the results of oneand three-dimensional particle-trajectory simulations. The comparison, which included the analysis of the e ects of nite switch-on and switch-o times of the deceleration pulses, revealed that transverse e ects in the decelerator lead to a considerable reduction of the

•Jan 1, 2012•0 citations

A travelling wave Zeeman decelerator for atoms and molecules

Lewis A. McArd

The design of a modular moving trap Zeeman decelerator capable of decelerating gas pulses produced from a supersonic source is presented here. Unlike the conventional form of Zeeman decelerator, paramagnetic particles are confined in a 3D potential throughout the deceleration process. The decelerator field is produced by flattened helical coils and currents of up to 1000 A peak. As the coils are periodic in nature, each coil produces a number of deep, quadrupole traps along the molecular beam axis. The resultant periodic field is described as a travelling wave. The application of the appropriate time dependent current allows the traps to move through the four coil modules. In order to compensate for the weaker transverse confinement, a quadrupole guide, operating at 700 A DC, is required to prevent further losses during the deceleration process. The operation of the decelerator relies on the power electronics developed specifically for the quadrupole and the decelerator coils. Due to the electromagnetic interference generated through the switching of the large currents, much of the electronics used to control the power electronics had to be developed specifically. The quadrupole power electronics have been designed to produce fast switching edges. This is necessary to minimise the interaction of the particles within the fringe field regions while maximising the interaction time within the pure quadrupole field. Even at a modest voltage applied to the circuitry, the rise time in current to 700 A has been reduced by a half. The decelerator power electronics must be capable of producing an alternating waveform with an amplitude of at least 500 A for each of the coil phases. Furthermore, the frequency of the waveforms must be tunable within a range of 10 kHz to 0 Hz. Through a combination of pulse width modulation and knowledge of the electrical properties of the coil it is possible to synthesise an alternating current waveform from a 800 V DC supply using a suitable switching circuit. %The challenge of switching such high powers is the transient voltage spikes that can be produced, however, these can be avoided through careful consideration of the layout of the circuit. Decelerators such as this do not cool the sample but instead reduces the mean velocity of a subset of particles which remained trapped. This maintains the phase space density of trapped particles. Modelling the magnetic fields generated by the decelerator coils has been necessary in order to understand the phase space acceptance of the decelerator. The helical nature of the coils required the development of a specific algorithm in order to calculate the field generated by each wire element. The resultant potential can then be interpolated using a tricubic interpolator to extract the field gradients necessary for numerical simulations of the particle trajectories. Including the effects of the pulse width modulated on the trap facilitates the characterisation of the acceptance of the decelerator and the limitations of the current iteration of the design. The numerical simulations can also be compared to experimental results gathered for metastable argon. The 3D guiding, or velocity bunching, of the gas packet over a range of velocities has been demonstrated. The ability to 3D guide and decelerate were severely hampered by the failure of key electronic components, limiting three coils to 100 A peak, moreover, these traps were sub-optimally loaded. Deceleration from 350 to 347 m/s and 342 to 310 m/s has been observed. The design of a trap capable of simultaneously loading samples of decelerated CaH and Li while allowing the cooling of Li would potentially allow for the sympathetic cooling of a molecular species with an atomic refrigerant. This particular atom-molecule system would also facilitate the examination of controlled chemistry and collisions over a range of temperatures through state selection of the reactants. The loading of the trap has been optimised in 1D for CaH with a loading efficiency of 52.2 % while only 7.3 % of Li is loaded when each of the gas packets has a mean velocity of 11 m/s. This implies that the source of the Li must be at least 130 times brighter than that of the CaH.

•Jan 1, 2018•2 citations
In Zeeman deceleration, time-varying spatially inhomogeneous magnetic fields are used to create packets of translationally cold, quantum-state-selected paramagnetic particles with a tuneable forward velocity, which are ideal for cold reaction dynamics studies. Here, the covariance matrix adaptation evolutionary strategy is adopted in order to optimise deceleration switching sequences for the operation of a Zeeman decelerator. Using the optimised sequences, a 40% increase in the number of decelerated particles is observed compared to standard sequences for the same final velocity, imposing the same experimental boundary conditions. Furthermore, we demonstrate that it is possible to remove up to 98% of the initial kinetic energy of particles in the incoming beam, compared to the removal of a maximum of 83% of kinetic energy with standard sequences. Three-dimensional particle trajectory simulations are employed to reproduce the experimental results and to investigate differences in the deceleration mechanism adopted by standard and optimised sequences. It is experimentally verified that the optimal solution uncovered by the evolutionary algorithm is not merely a local optimisation of the experimental parameters—it is a novel mode of operation that goes beyond the standard periodic phase stability approach typically adopted.
Generating a controllable and pure source of molecular free-radicals or open-shell atoms has been one of the primary barriers hindering the detailed study of radical processes in the laboratory. In this thesis, a novel source of state-selected radicals -- composed of a Zeeman decelerator interfaced with a newly-designed magnetic guide -- is introduced. This tuneable source generates a pure beam of velocity-selected hydrogen atoms that will enable the study of radical interactions with exceptional control over the properties of the radical species. In Zeeman deceleration, time-varying spatially inhomogeneous magnetic fields are used to create packets of translationally cold, quantum-state-selected paramagnetic particles with a tuneable forward velocity, which are ideal for cold reaction dynamics studies. In a proof-of-principle experiment, the Zeeman deceleration of nitrogen atoms in the metastable 2D5/2 state from 460 to 410 m/s is demonstrated for the first time. The covariance matrix adaptation evolutionary strategy (CMA-ES) is adopted in order to optimise deceleration switching sequences for the operation of a 12-stage Zeeman decelerator. Using the optimised sequences, a 40% increase in the number of decelerated H(2S1/2) atoms is observed compared to standard sequences for the same final velocity, imposing the same experimental boundary conditions. Furthermore, up to 98% of the initial kinetic energy of particles in the incoming beam is removed by the optimised sequences, compared to the removal of a maximum of 83% of kinetic energy with standard sequences. Three-dimensional particle-trajectory simulations show that the optimal solution uncovered by the evolutionary algorithm is not merely a local optimisation of the experimental parameters -- it is a new mode of operation that goes beyond the standard periodic phase stability approach typically adopted. A novel magnetic guide is designed and constructed to purify the post-deceleration beam. Only radicals with a selected velocity are transmitted through the guide; all other components of the incoming beam (radical species travelling at other velocities, precursor molecules and seed gases) are removed. The guide is composed of four Halbach arrays -- hexapolar focusing elements -- and two skimming blades. The relative positions of these components can be adjusted to tune the properties of the resulting beam and to optimise transmission for a given velocity. Experimental measurements of Zeeman-decelerated H atoms transmitted through the guide, combined with extensive simulations, show that the magnetic guide successfully removes 99% of H atoms travelling outside the narrow target velocity range.
We present a formalism to calculate phase-space acceptance in a Zeeman decelerator. Using parameters closely mimicking previous Zeeman deceleration experiments, this approach reveals a velocity dependence of the phase stability which we ascribe to the finite rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. It is shown that changing the current switch-off times (characterized by the reduced position of the synchronous particle ${\ensuremath{\kappa}}_{0}$) as the sequence progresses, so as to maintain a constant mean acceleration per pulse, can lead to a constant phase stability and hence a beam with well-defined characteristics. We also find that the time overlap between fields of adjacent coils has an influence on the phase-space acceptance. Previous theoretical and experimental results [A. W. Wiederkehr et al., Phys. Rev. A 82, 043428 (2010); J. Chem. Phys. 135, 214202 (2011).] suggested unfilled regions in phase space that influence particle transmission through the decelerator. Our model provides a means to directly identify the origin of these effects due to coupling between longitudinal and transverse dynamics. Since optimum phase stability is restricted to a rather small parameter range in terms of the reduced position of the synchronous particle ${\ensuremath{\kappa}}_{0}$, only a limited range of final velocities can be attained using a given number of coils. We evaluate phase stability for different Zeeman deceleration sequences, and by comparison with numerical three-dimensional particle-trajectory simulations, we demonstrate that our model provides a valuable tool to find optimum parameter sets for improved Zeeman deceleration schemes. An acceleration-deceleration scheme is shown to be a useful approach to generating beams with well-defined properties for variable-energy collision experiments. More generally, the model provides significant physical insights that are applicable to other types of particle decelerators with finite rise and fall time fields.
The phase stability of a multistage Zeeman decelerator is analyzed by numerical particle-trajectory simulations and experimental measurements. A one-dimensional model of the phase stability in multistage Stark deceleration [Bethlem et al., Phys. Rev. Lett. 84, 5744 (2000)] has been adapted to multistage Zeeman deceleration and compared with one- and three-dimensional particle-trajectory simulations, including the analysis of the effect of finite switch-on and -off times of the deceleration pulses. The comparison reveals that transverse effects in the decelerator lead to a considerable reduction of the phase-space acceptance at low values of the phase angle and an enhancement at high values. The optimal combinations of phase angles and currents with which a preset amount of kinetic energy can be removed from atoms and molecules in a pulsed supersonic beam using a multistage decelerator are determined by simulation. Quantitative analysis of the phase-space acceptance within a given volume reveals that for our decelerator (8 $\mathrm{\ensuremath{\mu}}\mathrm{s}$ switch-off time) optimal conditions are achieved for values of the phase angle between ${45}^{\ifmmode^\circ\else\textdegree\fi{}}$ and ${55}^{\ifmmode^\circ\else\textdegree\fi{}}$. This conclusion is examined and confirmed by experimental measurements using deuterium atoms. Alternative approaches to generate optimal deceleration pulse sequences, such as the implementation of evolutionary algorithms or the use of higher-order modes of the decelerator, are discussed.
Zeeman deceleration is an experimental technique which allows for the manipulation of open-shell atoms and molecules in a supersonic beam thus producing mK-cold, velocity-tunable beams of particles in selected quantum states. The method relies on the Zeeman interaction between paramagnetic particles and time-varying, inhomogeneous magnetic fields generated by pulsing high currents through an array of solenoid coils. This thesis describes the construction and implementation of a supersonic beam setup including a 12-stage Zeeman decelerator. The Zeeman decelerator follows an original design that makes it possible to replace individual deceleration coils. Using ground-state hydrogen atoms as a test system, it is shown that the transverse acceptance in a Zeeman decelerator can be significantly increased by generating a rather low, temporally varying quadrupole field in one of the solenoid coils. An electron-impact source was constructed and optimised enabling, for the first time, the Zeeman deceleration of metastable helium atoms in the 23S1 state, with an up to 40 % decrease in the kinetic energy of the beam. It is shown that the pulse duration for electron-impact excitation needs to be matched to the acceptance of the decelerator in order to attain a good contrast between the decelerated and undecelerated parts of the beam. Experimental results are rigorously analysed and interpreted using three-dimensional numerical particle trajectory simulations. A phase-space model provides, for the first time, a means to estimate the six-dimensional phase-space acceptance in a Zeeman decelerator and to find optimum parameter sets for improved Zeeman deceleration schemes. The approach also reveals a hitherto unconsidered velocity dependence of the phase stability which is ascribed mainly to the rise and fall times of the current pulses that generate the magnetic fields inside the deceleration coils. In the future, it is planned to combine the Zeeman decelerator with a source of cold atomic and molecular ions to study chemical collisions at low temperatures. A hybrid magnetic guide consisting of permanent magnet assemblies (Halbach arrays) in hexapole configuration and a set of current-carrying wires is proposed and simulated as an interface between these setups. The design promises very efficient velocity selection, a high degree of quantum-state selection and a nearly complete removal of residual carrier gas. Prospects for using magnetic hexapole focusing in front of the Zeeman decelerator are discussed. The work represents a major step towards the study and control of chemical reactivity of paramagnetic species in the low-temperature regime and it will help in the testing of fundamental chemical reaction theories.
A modular multistage Zeeman decelerator consisting of an array of solenoids has been developed to control the velocity of cold, paramagnetic atoms and molecules in supersonic beams. The translational motion these atoms and molecules was manipulated with high precision by exploiting the interaction between their magnetic moments and timedependent inhomogeneous magnetic elds. Deceleration was achieved by pulsing high currents (up to 300 A) through the solenoids of the decelerator with pulse sequences calculated to preserve the phase-space density of the atomic and molecular samples while removing a preset amount of kinetic energy. For the operation of the multistage Zeeman decelerator, solenoids and electronic units were developed to generate strong magneticeld pulses (> 2 T) with rise and fall times of only a few microseconds. An accurate three-dimensional particle-trajectory simulation program has been developed to analyze the deceleration process and optimize its e ciency. This software was thoroughly tested by systematic comparison with experimental results and enabled, in combination with measurements, the complete characterization of the spatial and velocity distributions of the decelerated and trapped atoms for di erent sets of experimental conditions. The program was essential to achieve a complete interpretation of the dynamics of the deceleration process and to devise a strategy to e ciently load the decelerated atoms and molecules into magnetic quadrupole traps. In a rst experiment, hydrogen atoms seeded in a supersonic expansion of Kr have been decelerated from an initial velocity of 435 m/s to nal velocities as low as 107 m/s in a 12-stage Zeeman decelerator. The operation of the decelerator has been analyzed by comparing the results of numerical particle-trajectory simulations with those of independent measurements of the velocity distribution by ion time-ofight mass spectrometry following photoionization of the decelerated atoms. The velocity distribution of the decelerated atom cloud was found to have a half width at half maximum of 25± 12 m/s corresponding to a temperature of ∼ 40 mK. The phase stability of the multistage-Zeeman-deceleration process has been investigated by numerical particle-trajectory simulations and experimental measurements on deuterium atoms in a 24-stage Zeeman decelerator. A one-dimensional analytical model of the phase stability in a multistage Zeeman decelerator was adapted from a one-dimensional model of phase stability in a multistage Stark decelerator and compared with the results of oneand three-dimensional particle-trajectory simulations. The comparison, which included the analysis of the e ects of nite switch-on and switch-o times of the deceleration pulses, revealed that transverse e ects in the decelerator lead to a considerable reduction of the
The design of a modular moving trap Zeeman decelerator capable of decelerating gas pulses produced from a supersonic source is presented here. Unlike the conventional form of Zeeman decelerator, paramagnetic particles are confined in a 3D potential throughout the deceleration process. The decelerator field is produced by flattened helical coils and currents of up to 1000 A peak. As the coils are periodic in nature, each coil produces a number of deep, quadrupole traps along the molecular beam axis. The resultant periodic field is described as a travelling wave. The application of the appropriate time dependent current allows the traps to move through the four coil modules. In order to compensate for the weaker transverse confinement, a quadrupole guide, operating at 700 A DC, is required to prevent further losses during the deceleration process. The operation of the decelerator relies on the power electronics developed specifically for the quadrupole and the decelerator coils. Due to the electromagnetic interference generated through the switching of the large currents, much of the electronics used to control the power electronics had to be developed specifically. The quadrupole power electronics have been designed to produce fast switching edges. This is necessary to minimise the interaction of the particles within the fringe field regions while maximising the interaction time within the pure quadrupole field. Even at a modest voltage applied to the circuitry, the rise time in current to 700 A has been reduced by a half. The decelerator power electronics must be capable of producing an alternating waveform with an amplitude of at least 500 A for each of the coil phases. Furthermore, the frequency of the waveforms must be tunable within a range of 10 kHz to 0 Hz. Through a combination of pulse width modulation and knowledge of the electrical properties of the coil it is possible to synthesise an alternating current waveform from a 800 V DC supply using a suitable switching circuit. %The challenge of switching such high powers is the transient voltage spikes that can be produced, however, these can be avoided through careful consideration of the layout of the circuit. Decelerators such as this do not cool the sample but instead reduces the mean velocity of a subset of particles which remained trapped. This maintains the phase space density of trapped particles. Modelling the magnetic fields generated by the decelerator coils has been necessary in order to understand the phase space acceptance of the decelerator. The helical nature of the coils required the development of a specific algorithm in order to calculate the field generated by each wire element. The resultant potential can then be interpolated using a tricubic interpolator to extract the field gradients necessary for numerical simulations of the particle trajectories. Including the effects of the pulse width modulated on the trap facilitates the characterisation of the acceptance of the decelerator and the limitations of the current iteration of the design. The numerical simulations can also be compared to experimental results gathered for metastable argon. The 3D guiding, or velocity bunching, of the gas packet over a range of velocities has been demonstrated. The ability to 3D guide and decelerate were severely hampered by the failure of key electronic components, limiting three coils to 100 A peak, moreover, these traps were sub-optimally loaded. Deceleration from 350 to 347 m/s and 342 to 310 m/s has been observed. The design of a trap capable of simultaneously loading samples of decelerated CaH and Li while allowing the cooling of Li would potentially allow for the sympathetic cooling of a molecular species with an atomic refrigerant. This particular atom-molecule system would also facilitate the examination of controlled chemistry and collisions over a range of temperatures through state selection of the reactants. The loading of the trap has been optimised in 1D for CaH with a loading efficiency of 52.2 % while only 7.3 % of Li is loaded when each of the gas packets has a mean velocity of 11 m/s. This implies that the source of the Li must be at least 130 times brighter than that of the CaH.