Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Application in Adiabatic Quantum Annealing

Siyuan Han

Published Aug 22, 2017• 0 citations
Publisher

Abstract

This chapter focuses on the application of Nb Josephson junctions (JJs) in quantum annealing (QA). It begins with a brief introduction to diffident strategies for implementing quantum computation (QC) with an emphasis on quantum annealing. The chapter presents the basic physics of the simplest superconducting flux qubit: radio frequency superconducting quantum interference devices (RF-SQUID). It gives a brief description on the design and realization of couplers, and control and measurement circuitry using Nb Josephson junctions. The chapter describes a scalable architecture upon which quantum annealing processors consisting up to 1024 superconducting flux qubits made of more than 104 Nb Josephson junctions. It discusses evidence on whether D-Wave 2X, which is the latest quantum annealing processor available, works as expected. The chapter also focuses on the physics and application of RF-SQUID flux qubits because the fundamental building blocks of the most advanced quantum annealers demonstrated so far are variations of superconducting flux qubits with one Josephson junction, a.k.a. the RF-SQUID.

DOI
10.1201/9781315364520-9

Related papers

Superconducting Quantum Electronics

Sasan Razmkhah, Pascal Febvre

Superconducting quantum electronics is formally born in 1911, three years after Heike Kamerlingh Onnes was able to liquefy helium at the University of Leiden in the Netherlands. Josephson junctions are simple devices made of two superconductors coupled through a thin barrier, which can be made of one of several layers of insulating, normal metal, or ferromagnetic material. This chapter discusses the surface impedance of superconductors and their behavior in the radiofrequency (RF) regime. After the Josephson junction discovery, many new applications surfaced and the Josephson junction has become to date the most versatile active element used for superconducting analogue, digital and quantum electronics. These applications include magnetometers and gradiometers based on RF and DC superconducting quantum interference devices (SQUIDs), Josephson voltage standards, analogue-to-digital converters, quasi-one-junction SQUIDs, digital logic circuits, quantum computing, quantum communication and quantum sensing. The chapter discusses some of its applications.

Wiley eBooks•Jul 21, 2023•10 citations

Synchronization of multiple coupled rf-SQUID flux qubits

R Harris, F Brito, A J Berkley +10 more

A practical strategy for synchronizing the properties of compound Josephson junction (CJJ) radio frequency monitored superconducting quantum interference device (rf-SQUID) qubits on a multi-qubit chip has been demonstrated. The impact of small (∼1%) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom-tuned flux offset to the CJJ structure of each qubit. This strategy allows for a simultaneous synchronization of the qubit persistent current and tunnel splitting over a range of external bias parameters that is relevant for the implementation of an adiabatic quantum processor.

arXiv:0903.1884•New Journal of Physics•Dec 21, 2009•20 citations

Architectural Considerations in the Design of a Superconducting Quantum Annealing Processor

P. I. Bunyk, Emile Hoskinson, Mark W. Johnson +8 more

We have developed a quantum annealing processor, based on an array of tunable coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process. Implementing this type of processor at a scale of 512 qubits and 1472 programmable interqubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a few dozen or so devices. Here, we discuss some of these considerations, and the delicate balance necessary for the construction of a practical processor that respects the demanding physical requirements imposed by a quantum algorithm. In particular, we will review some of the design tradeoffs at play in the floor planning of the physical layout, driven by the desire to have an algorithmically useful set of interqubit couplers, and the simultaneous need to embed programmable control circuitry into the processor fabric. In this context, we have developed a new ultralow-power embedded superconducting digital-to-analog flux converter (DAC) used to program the processor with zero static power dissipation, optimized to achieve maximum flux storage density per unit area. The 512 single-stage, 3520 two-stage, and 512 three-stage flux DACs are controlled with an XYZ addressing scheme requiring 56 wires. Our estimate of on-chip dissipated energy for worst-case reprogramming of the whole processor is ~ 65 fJ. Several chips based on this architecture have been fabricated and operated successfully at our facility, as well as two outside facilities (see, for example, the recent reporting by Jones).

arXiv:1401.5504•IEEE Transactions on Applied Superconductivity•Apr 18, 2014•375 citations

Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit

R. Harris, A. J. Berkley, Johansson, J. +10 more

A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.

arXiv:0903.3906•Mar 23, 2009•10 citations

Quantum computing based on a superconducting quantum interference device: exploiting the flux basis

Mark W. Coffey

Two classes of superconducting devices have been proposed as quantum bits (qubits) for realizing quantum logic operations. The flux qubits based on a superconducting quantum interference device (SQUID) appear to be particularly promising owing to the macroscopic nature of the qubit and potential integration with high-speed control circuitry in the form of rapid single-flux quantum electronics. Recent progress is discussed and near-term challenges mentioned. The radio frequency SQUID-based qubit offers a prospect for a reliably manufacturable scalable approach.

Journal of Modern Optics•Nov 1, 2002•5 citations

Josephson Junctions

Daniel D. Stancil, Gregory T. Byrd

The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.

Wiley eBooks•Apr 5, 2022•0 citations
This chapter focuses on the application of Nb Josephson junctions (JJs) in quantum annealing (QA). It begins with a brief introduction to diffident strategies for implementing quantum computation (QC) with an emphasis on quantum annealing. The chapter presents the basic physics of the simplest superconducting flux qubit: radio frequency superconducting quantum interference devices (RF-SQUID). It gives a brief description on the design and realization of couplers, and control and measurement circuitry using Nb Josephson junctions. The chapter describes a scalable architecture upon which quantum annealing processors consisting up to 1024 superconducting flux qubits made of more than 104 Nb Josephson junctions. It discusses evidence on whether D-Wave 2X, which is the latest quantum annealing processor available, works as expected. The chapter also focuses on the physics and application of RF-SQUID flux qubits because the fundamental building blocks of the most advanced quantum annealers demonstrated so far are variations of superconducting flux qubits with one Josephson junction, a.k.a. the RF-SQUID.
Superconducting quantum electronics is formally born in 1911, three years after Heike Kamerlingh Onnes was able to liquefy helium at the University of Leiden in the Netherlands. Josephson junctions are simple devices made of two superconductors coupled through a thin barrier, which can be made of one of several layers of insulating, normal metal, or ferromagnetic material. This chapter discusses the surface impedance of superconductors and their behavior in the radiofrequency (RF) regime. After the Josephson junction discovery, many new applications surfaced and the Josephson junction has become to date the most versatile active element used for superconducting analogue, digital and quantum electronics. These applications include magnetometers and gradiometers based on RF and DC superconducting quantum interference devices (SQUIDs), Josephson voltage standards, analogue-to-digital converters, quasi-one-junction SQUIDs, digital logic circuits, quantum computing, quantum communication and quantum sensing. The chapter discusses some of its applications.
A practical strategy for synchronizing the properties of compound Josephson junction (CJJ) radio frequency monitored superconducting quantum interference device (rf-SQUID) qubits on a multi-qubit chip has been demonstrated. The impact of small (∼1%) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom-tuned flux offset to the CJJ structure of each qubit. This strategy allows for a simultaneous synchronization of the qubit persistent current and tunnel splitting over a range of external bias parameters that is relevant for the implementation of an adiabatic quantum processor.
We have developed a quantum annealing processor, based on an array of tunable coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process. Implementing this type of processor at a scale of 512 qubits and 1472 programmable interqubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a few dozen or so devices. Here, we discuss some of these considerations, and the delicate balance necessary for the construction of a practical processor that respects the demanding physical requirements imposed by a quantum algorithm. In particular, we will review some of the design tradeoffs at play in the floor planning of the physical layout, driven by the desire to have an algorithmically useful set of interqubit couplers, and the simultaneous need to embed programmable control circuitry into the processor fabric. In this context, we have developed a new ultralow-power embedded superconducting digital-to-analog flux converter (DAC) used to program the processor with zero static power dissipation, optimized to achieve maximum flux storage density per unit area. The 512 single-stage, 3520 two-stage, and 512 three-stage flux DACs are controlled with an XYZ addressing scheme requiring 56 wires. Our estimate of on-chip dissipated energy for worst-case reprogramming of the whole processor is ~ 65 fJ. Several chips based on this architecture have been fabricated and operated successfully at our facility, as well as two outside facilities (see, for example, the recent reporting by Jones).
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.
Two classes of superconducting devices have been proposed as quantum bits (qubits) for realizing quantum logic operations. The flux qubits based on a superconducting quantum interference device (SQUID) appear to be particularly promising owing to the macroscopic nature of the qubit and potential integration with high-speed control circuitry in the form of rapid single-flux quantum electronics. Recent progress is discussed and near-term challenges mentioned. The radio frequency SQUID-based qubit offers a prospect for a reliably manufacturable scalable approach.
The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.