Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Quantum Parametric Mode Sorting: Beating the Time-Frequency Filtering

Amin Shahverdi, Yong Meng Sua, Lubna Tumeh, Yu‐Ping Huang

Published Jul 19, 2017• 57 citations
Publisher

Abstract

Selective detection of signal over noise is essential to measurement and signal processing. Time-frequency filtering has been the standard approach for the optimal detection of non-stationary signals. However, there is a fundamental tradeoff between the signal detection efficiency and the amount of undesirable noise detected simultaneously, which restricts its uses under weak signal yet strong noise conditions. Here, we demonstrate quantum parametric mode sorting based on nonlinear optics at the edge of phase matching to improve the tradeoff. By tailoring the nonlinear process in a commercial lithium-niobate waveguide through optical arbitrary waveform generation, we demonstrate highly selective detection of picosecond signals overlapping temporally and spectrally but in orthogonal time-frequency modes as well as against broadband noise, with performance well exceeding the theoretical limit of the optimized time-frequency filtering. We also verify that our device does not introduce any significant quantum noise to the detected signal and demonstrate faithful detection of pico-second single photons. Together, these results point to unexplored opportunities in measurement and signal processing under challenging conditions, such as photon-starving quantum applications.

DOI
10.1038/s41598-017-06564-7

Related papers

Quantum parametric mode sorting for remote sensing and imaging

Yu‐Ping Huang

Detection signal to noise ratio lies at the heart of any remote sensing task. Matched filters have long been deployed as the optimal devices for radio and microwave receiving. However, their implements in the optics domain are challenging due to a much higher bandwidth and the intensity-only measurement by incoherent detectors. For applications involving high noise and low signal, their utilities are overly restricted by a fundamental trade-off between the signal detection efficiency and noise rejection. In this talk, I will describe a nascent approach, quantum parametric mode sorting, to addressing these practical and fundamental challenges. It is realized via quantum frequency conversion at the phase matching edge, where the signal distillation, picosecond timing tagging, and wavelength transduction are accomplished during a single pass through a nonlinear waveguide or crystal. I will report our experimental progress on using it a variety of single photon sensing and imaging tasks.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

Selective Detection of Picosecond Overlapping Quantum Modes

Amin Shahverdi, Yong Meng Sua, Yu‐Ping Huang

We demonstrate selective frequency conversion of single photons in overlapping quantum modes of picosecond waveforms, achieving a detection signal-to-noise well exceeding the theoretical limit of the optimal time-frequency filtering.

Frontiers in Optics•Jan 1, 2017•0 citations

Time-frequency optical filtering: efficiency vs. temporal-mode discrimination in incoherent and coherent implementations

Michael G. Raymer, Konrad Banaszek

Time-frequency (TF) filtering of analog signals has played a crucial role in the development of radio-frequency communications and is currently being recognized as an essential capability for communications, both classical and quantum, in the optical frequency domain. How best to design optical time-frequency (TF) filters to pass a targeted temporal mode (TM), and to reject background (noise) photons in the TF detection window? The solution for 'coherent' TF filtering is known-the quantum pulse gate-whereas the conventional, more common method is implemented by a sequence of incoherent spectral filtering and temporal gating operations. To compare these two methods, we derive a general formalism for two-stage incoherent time-frequency filtering, finding expressions for signal pulse transmission efficiency, and for the ability to discriminate TMs, which allows the blocking of unwanted background light. We derive the tradeoff between efficiency and TM discrimination ability, and find a remarkably concise relation between these two quantities and the time-bandwidth product of the combined filters. We apply the formalism to two examples-rectangular filters or Gaussian filters-both of which have known orthogonal-function decompositions. The formalism can be applied to any state of light occupying the input temporal mode, e.g., 'classical' coherent-state signals or pulsed single-photon states of light. In contrast to the radio-frequency domain, where coherent detection is standard and one can use coherent matched filtering to reject noise, in the optical domain direct detection is optimal in a number of scenarios where the signal flux is extremely small. Our analysis shows how the insertion loss and SNR change when one uses incoherent optical filters to reject background noise, followed by direct detection, e.g. photon counting. We point out implications in classical and quantum optical communications. As an example, we study quantum key distribution, wherein strong rejection of background noise is necessary to maintain a high quality of entanglement, while high signal transmission is needed to ensure a useful key generation rate.

arXiv:2008.09280•Optics Express•Oct 1, 2020•24 citations

Noise-tolerant single photon sensitive three-dimensional imager

Patrick Rehain, Yong Meng Sua, Shenyu Zhu +5 more

Active imagers capable of reconstructing 3-dimensional (3D) scenes in the presence of strong background noise are highly desirable for many sensing and imaging applications. A key to this capability is the time-resolving photon detection that distinguishes true signal photons from the noise. To this end, quantum parametric mode sorting (QPMS) can achieve signal to noise exceeding by far what is possible with typical linear optics filters, with outstanding performance in isolating temporally and spectrally overlapping noise. Here, we report a QPMS-based 3D imager with exceptional detection sensitivity and noise tolerance. With only 0.0006 detected signal photons per pulse, we reliably reconstruct the 3D profile of an obscured scene, despite 34-fold spectral-temporally overlapping noise photons, within the 6 ps detection window (amounting to 113,000 times noise per 20 ns detection period). Our results highlight a viable approach to suppress background noise and measurement errors of single photon imager operation in high-noise environments.

Nature Communications•Feb 17, 2020•85 citations

Quantum optical arbitrary waveform manipulation and measurement in real time

Abijith S. Kowligy, Paritosh Manurkar, Neil Corzo +7 more

We describe a technique for dynamic quantum optical arbitrary-waveform generation and manipulation, which is capable of mode selectively operating on quantum signals without inducing significant loss or decoherence. It is built upon combining the developed tools of quantum frequency conversion and optical arbitrary waveform generation. Considering realistic parameters, we propose and analyze applications such as programmable reshaping of picosecond-scale temporal modes, selective frequency conversion of any one or superposition of those modes, and mode-resolved photon counting. We also report on experimental progress to distinguish two overlapping, orthogonal temporal modes, demonstrating over 8 dB extinction between picosecond-scale time-frequency modes, which agrees well with our theory. Our theoretical and experimental progress, as a whole, points to an enabling optical technique for various applications such as ultradense quantum coding, unity-efficiency cavity-atom quantum memories, and high-speed quantum computing.

Optics Express•Nov 4, 2014•43 citations

Tailoring nonlinear processes for quantum optics with pulsed temporal-mode encodings

Vahid Ansari, John M. Donohue, Benjamin Brecht +1 more

The time-frequency degree of freedom is a powerful resource for implementing high-dimensional quantum information processing. In particular, field-orthogonal pulsed temporal modes offer a flexible framework compatible with both long-distance fibre networks and integrated waveguide devices. In order for this architecture to be fully utilised, techniques to reliably generate diverse quantum states of light and accurately measure complex temporal waveforms must be developed. To this end, nonlinear processes mediated by spectrally shaped pump pulses in group-velocity engineered waveguides and crystals provide a capable toolbox. In this review, we examine how tailoring the phasematching conditions of parametric downconversion and sum-frequency generation allows for highly pure single-photon generation, flexible temporal-mode entanglement, and accurate measurement of time-frequency photon states. We provide an overview of experimental progress towards these goals, and summarise challenges that remain in the field.

arXiv:1803.04316•Optica•Apr 30, 2018•160 citations
Selective detection of signal over noise is essential to measurement and signal processing. Time-frequency filtering has been the standard approach for the optimal detection of non-stationary signals. However, there is a fundamental tradeoff between the signal detection efficiency and the amount of undesirable noise detected simultaneously, which restricts its uses under weak signal yet strong noise conditions. Here, we demonstrate quantum parametric mode sorting based on nonlinear optics at the edge of phase matching to improve the tradeoff. By tailoring the nonlinear process in a commercial lithium-niobate waveguide through optical arbitrary waveform generation, we demonstrate highly selective detection of picosecond signals overlapping temporally and spectrally but in orthogonal time-frequency modes as well as against broadband noise, with performance well exceeding the theoretical limit of the optimized time-frequency filtering. We also verify that our device does not introduce any significant quantum noise to the detected signal and demonstrate faithful detection of pico-second single photons. Together, these results point to unexplored opportunities in measurement and signal processing under challenging conditions, such as photon-starving quantum applications.
Detection signal to noise ratio lies at the heart of any remote sensing task. Matched filters have long been deployed as the optimal devices for radio and microwave receiving. However, their implements in the optics domain are challenging due to a much higher bandwidth and the intensity-only measurement by incoherent detectors. For applications involving high noise and low signal, their utilities are overly restricted by a fundamental trade-off between the signal detection efficiency and noise rejection. In this talk, I will describe a nascent approach, quantum parametric mode sorting, to addressing these practical and fundamental challenges. It is realized via quantum frequency conversion at the phase matching edge, where the signal distillation, picosecond timing tagging, and wavelength transduction are accomplished during a single pass through a nonlinear waveguide or crystal. I will report our experimental progress on using it a variety of single photon sensing and imaging tasks.
Time-frequency (TF) filtering of analog signals has played a crucial role in the development of radio-frequency communications and is currently being recognized as an essential capability for communications, both classical and quantum, in the optical frequency domain. How best to design optical time-frequency (TF) filters to pass a targeted temporal mode (TM), and to reject background (noise) photons in the TF detection window? The solution for 'coherent' TF filtering is known-the quantum pulse gate-whereas the conventional, more common method is implemented by a sequence of incoherent spectral filtering and temporal gating operations. To compare these two methods, we derive a general formalism for two-stage incoherent time-frequency filtering, finding expressions for signal pulse transmission efficiency, and for the ability to discriminate TMs, which allows the blocking of unwanted background light. We derive the tradeoff between efficiency and TM discrimination ability, and find a remarkably concise relation between these two quantities and the time-bandwidth product of the combined filters. We apply the formalism to two examples-rectangular filters or Gaussian filters-both of which have known orthogonal-function decompositions. The formalism can be applied to any state of light occupying the input temporal mode, e.g., 'classical' coherent-state signals or pulsed single-photon states of light. In contrast to the radio-frequency domain, where coherent detection is standard and one can use coherent matched filtering to reject noise, in the optical domain direct detection is optimal in a number of scenarios where the signal flux is extremely small. Our analysis shows how the insertion loss and SNR change when one uses incoherent optical filters to reject background noise, followed by direct detection, e.g. photon counting. We point out implications in classical and quantum optical communications. As an example, we study quantum key distribution, wherein strong rejection of background noise is necessary to maintain a high quality of entanglement, while high signal transmission is needed to ensure a useful key generation rate.
Active imagers capable of reconstructing 3-dimensional (3D) scenes in the presence of strong background noise are highly desirable for many sensing and imaging applications. A key to this capability is the time-resolving photon detection that distinguishes true signal photons from the noise. To this end, quantum parametric mode sorting (QPMS) can achieve signal to noise exceeding by far what is possible with typical linear optics filters, with outstanding performance in isolating temporally and spectrally overlapping noise. Here, we report a QPMS-based 3D imager with exceptional detection sensitivity and noise tolerance. With only 0.0006 detected signal photons per pulse, we reliably reconstruct the 3D profile of an obscured scene, despite 34-fold spectral-temporally overlapping noise photons, within the 6 ps detection window (amounting to 113,000 times noise per 20 ns detection period). Our results highlight a viable approach to suppress background noise and measurement errors of single photon imager operation in high-noise environments.
We describe a technique for dynamic quantum optical arbitrary-waveform generation and manipulation, which is capable of mode selectively operating on quantum signals without inducing significant loss or decoherence. It is built upon combining the developed tools of quantum frequency conversion and optical arbitrary waveform generation. Considering realistic parameters, we propose and analyze applications such as programmable reshaping of picosecond-scale temporal modes, selective frequency conversion of any one or superposition of those modes, and mode-resolved photon counting. We also report on experimental progress to distinguish two overlapping, orthogonal temporal modes, demonstrating over 8 dB extinction between picosecond-scale time-frequency modes, which agrees well with our theory. Our theoretical and experimental progress, as a whole, points to an enabling optical technique for various applications such as ultradense quantum coding, unity-efficiency cavity-atom quantum memories, and high-speed quantum computing.
The time-frequency degree of freedom is a powerful resource for implementing high-dimensional quantum information processing. In particular, field-orthogonal pulsed temporal modes offer a flexible framework compatible with both long-distance fibre networks and integrated waveguide devices. In order for this architecture to be fully utilised, techniques to reliably generate diverse quantum states of light and accurately measure complex temporal waveforms must be developed. To this end, nonlinear processes mediated by spectrally shaped pump pulses in group-velocity engineered waveguides and crystals provide a capable toolbox. In this review, we examine how tailoring the phasematching conditions of parametric downconversion and sum-frequency generation allows for highly pure single-photon generation, flexible temporal-mode entanglement, and accurate measurement of time-frequency photon states. We provide an overview of experimental progress towards these goals, and summarise challenges that remain in the field.