In this thesis work, after a brief introduction of some basic concepts of quantum optics, some experimental techniques useful for the manipulation of quantum states of light are presented. In particular, I focused on two transformations operated at the single-photon level, like the addition and the subtraction of a single photon from a travelling light beam. Both these methods share a probabilistic approach, that is their implementation has a non unitary success probability. Anyway, the detection of an additional photon in an ancillary mode exactly announces when the operation has been actually implemented. That's why this type of implementation is generally called heralded. Starting from these basic operations, a way to implement some of their superpositions is then analyzed. In the second part of this thesis, I describe two state-engineering experiments based on these fundamental operations. The first one realizes a so-called universal orthogonalizer, an universal strategy that, given an arbitrary input state, can be used to produce at the output an orthogonal one. The adjective universal refers to the fact that the procedure works equally well for arbitrary input fields. The other experiment uses coherent superpositions of basic quantum operations to emulate a strong Kerr nonlinearity at the few-photon level, and could be used to implement new logic gates for quantum computation. The third part of this thesis is dedicated to a different experimental approach, in some sense complementary to state engineering: mode engineering. Indeed, while in state engineering the purpose is the detection of an unknown state after its manipulation, in mode engineering experiments the perspective is completely reversed: the final state is assumed to be known and what has to be inferred are its spatio-temporal features. By following this alternative experimental approach, the interaction of broadband single photons with resonant atomic vapours is analyzed by observing the traces left on the photon temporal shape.
In this thesis work, after a brief introduction of some basic concepts of quantum optics, some experimental techniques useful for the manipulation of quantum states of light are presented. In particular, I focused on two transformations operated at the single-photon level, like the addition and the subtraction of a single photon from a travelling light beam. Both these methods share a probabilistic approach, that is their implementation has a non unitary success probability. Anyway, the detection of an additional photon in an ancillary mode exactly announces when the operation has been actually implemented. That's why this type of implementation is generally called heralded. Starting from these basic operations, a way to implement some of their superpositions is then analyzed. In the second part of this thesis, I describe two state-engineering experiments based on these fundamental operations. The first one realizes a so-called universal orthogonalizer, an universal strategy that, given an arbitrary input state, can be used to produce at the output an orthogonal one. The adjective universal refers to the fact that the procedure works equally well for arbitrary input fields. The other experiment uses coherent superpositions of basic quantum operations to emulate a strong Kerr nonlinearity at the few-photon level, and could be used to implement new logic gates for quantum computation. The third part of this thesis is dedicated to a different experimental approach, in some sense complementary to state engineering: mode engineering. Indeed, while in state engineering the purpose is the detection of an unknown state after its manipulation, in mode engineering experiments the perspective is completely reversed: the final state is assumed to be known and what has to be inferred are its spatio-temporal features. By following this alternative experimental approach, the interaction of broadband single photons with resonant atomic vapours is analyzed by observing the traces left on the photon temporal shape.
Single photons are the smallest excitation states of the elctromagnetic field. They can be experimentally created but there is no apparatus that performs this task with 100% efficiency. Many techniques and theorems of optical quantum information theory use single photons. In order to utilize them for information processing, it is reasonable to know if they had been successfully produced. In other words: One needs heralded single photons. How to achieve this, is the main result of this diploma thesis. The task has been to improve the efficiency of already existing single photon sources. An apparatus had to be found which postprocesses the output of such sources in order to either herald the photons or at least to improve the efficiency. This apparatus is explicitly allowed to use other optical sources, for example coherent states (laser). The situation has been formally represented by the assumption that single photon sources produce a mixture of vacuum and the single photon state. It is known that experimental set-ups also create higher photon contributions. These contributions are considered to be small in corresponding publications. For some cases they even seem to vanish at all. One can distinguish two regimes concerning the techniques which have been used in this work: linear and nonlinear optics. Linear optical tools, for example the beam splitter, do not absorb photons in the ideal case, but it is not easy to implement useful transformations by their means. Absorption and weak coupling are drawbacks which arise mainly in nonlinear optical media. This work shows that the interactions two-photon absorption and cross phase modulation can be used in schemes, which enable the heralding of single photons. Already there are some linear optical quantum gates which manipulate optical states by means of single photons. Photons do not interact with each other directly, in contrast to electrons for example. Therefore quantum gates which act on more than one mode are interesting. The effective interaction of these gates is not quitecomparable to unitary dynamics. Moreover, these gates do not function in each case. Measurements required in auxiliary modes yield different results for each single case and in order to obtain the desired effect the cases have to be selected according to the measurement results. It has been investigated, how such gates perform if they have statistical mixtures as a resource instead of perfect single-photon states. Yet, no improvement of the single-photon contribution has been accomplished by means of these apparatuses. Hereby it has not been disproved that it is possible to achieve this goal using other apparatuses and techniques of linear optics. Yet, it has been shown that an enhancement is possible but then a non-vanishing two-photon contribution is appended. One of the most basic quantum gates is the conditional sign flip. The optical 8 interaction cross phase modulation acts in quite the same way considering only single photons. This effect enables the heralding of single photons in the ideal case. Within this work it has been shown that a Mach-Zehnder interferometer, a cross phase modulating medium and a photo-detector can be employed for this purpose. One could use any source of light as input to the interferometer but a strong coherent state (laser) may be preferred for the purpose of enhancing the interaction. The absorption of two-photon states is another non-linear effect. Astonishingly this effect serves to generate a heralded single-photon state given two imperfect single-photon sources. First the photon adding tool is employed which consists of a beam splitter and a photo-detector. By means of that and the statistical mixtures of two single-photon sources one creates a mixture which contains vacuum, the single-photon state and additionally the two-photon Fock state. This mixture propagates through a Mach-Zehnder interferometer. The interferometer is adjusted such that it is transparent for incoming light. In addition to the interferometer alone a two-photon absorbing medium is placed in one of its arms. For this reason there is a chance that the two-photon contribution entering the interferometer is absorbed within this medium. We cannot exclude this unfortunate case. A detector is placed in one of the two output modes. The interferometer is adjusted such that the single photon state does not leave in the mode in which the detector is placed, but always in the other mode. The detector can only click if the two-photon state propagates through the interferometer and if it is not destroyed in the absorbing medium. If the detector then receives one photon it is obvious that another one must leave in the other mode. The whole phenomenon is very similar to the concept of null measurement. Although not a main result, it has been shown here that the so-called Hong-Ou-Mandel effect can be generalized. It has been proven that the beam splitter transforms Fock states with equal Fock number into superpositions of Fock numbers which are even in each mode. Another effect on special odd Fock states is conjectured.
In this thesis, I present experimental and theoretical work which assesses and develops a range of tools that are required for performing quantum information processing, particularly in photonic systems. I investigate the three degrees of freedom of a single photon—its polarisation, spatialmomentum and time-frequency distributions. For polarisation, I show that using wave plates to implement arbitrary, single-qubit rotations is more complicated than is commonly appreciated. In the spatial-momentum and time-frequency domains, I develop ways to perform tomographic analysis of quantum states, and I report the first demonstrations of these techniques. In the time-frequency domain, the tomography technique utilises entanglement in the photon polarisation as a resource to store and provide access to the time-frequency information. In my first two experiments, I use spontaneous parametric down-conversion to produce entanglement between pairs of single photons in all three degrees of freedom. I demonstrate the first characterisation of entanglement in spatial modes and the time-frequency domain, the first quantitative measurement of entangled qutrit states, and the highest quality entangled states yet measured in both polarisation and spatial modes. I also report the first realisation of complete hyperentanglement, and a full, black-box tomography of a 36-dimensional two-photon state—the largest system to be characterised in this way to date. In my final experiment, I model and implement a new architecture for a controlled-Z gate which is much simpler to align than previous implementations. This gate requires only one non-classical interference condition, the visibility of which is the main limitation to its performance. I show that the gate operates effectively as a means of both creating entanglement and discriminating between the four elements in a basis of maximally entangled, Bell-type states. Indeed, its observed performance as a Bell analyser would be sufficient to build a quantum state teleporter which would guarantee that the recipient would be left with a better copy of an unknown input state than any eavesdropper. In a series of numerical simulations, I investigate some of the practicalities that arise when using tomographic reconstruction techniques, including how to estimate errors, which measurements to make and what is actually the optimal reconstruction. In particular, I show that tomographies perform better when based on the results from over-complete sets of measurements. Finally, I discuss the important issue of how to compare two processes, particularly when trying to assess the quality of a measured process by comparing it to some expected ideal. Judging possible candidate measures against a set of experimentally and theoretically motivated
Single photons - discrete wavepackets of light - are one of the most fundamental entities in physics. In recent years, the ability to consistently create and manipulate both single photons and pairs of photons has facilitated everything from tests of quantum theory to the implementation of quantum-enhanced precision measurements. These activities all fall within the scope of the rapidly-growing field of quantum information - the exploitation of the properties of quantum states (and specifically their capability to exist in superpositions) to accomplish tasks that would not be possible with classical objects. One stated goal of research in quantum information is to build a device consisting of a network of quantum logic gates that can evaluate quantum algorithms. The photonic implementation of individual logic gates has already been demonstrated. However, partly due to standard methods of preparing single photons, current schemes have severe limitations in terms of scaling up from a single logic gate to multiple concatenated operations. Until now it has not been proven that single photons can be generated in pure and indistinguishable quantum states, something upon which the successful operation of optical quantum logic gates relies. This thesis presents an experimental demonstration of simultaneous generation of almost identical single photons in highly pure states from two independent sources based on parametric downconversion. This is a process of photon pair generation during the passage of a light beam through a nonlinear crystal; one photon from the resulting pair is detected to herald the other. The work herein describes, refines, and implements a technique that minimises the strong quantum correlations usually present within each pair by spectral engineering of the source. This allows the heralded single photons to be in pure states, a property that is confirmed by observing a high-visibility two-photon interference effect without spectral filtering.
An optical quantum memory, a device which can store and retrieve on demand an arbitrary quantum state at the single photon level, has been identified as a significant cornerstone of photonic quantum technologies. The development of such a memory would allow the creation and development of a large number of quantum technologies. These would range from the ability to synchronise processing steps in an optical quantum computer, to the construction of a quantum repeater which would allow faithful transmission of quantum states over arbitrarily long distances. In this thesis I investigate broadband light storage in a room-temperature Raman memory for purposes of quantum information processing with photons. During the course of this thesis, a novel scheme to suppress four-wave mixing noise is simulated, based on equations derived to describe the physics of the memory interaction. The experimental arrangement to test the suppression method is described and an original method using photon statistics is demonstrated. The results of these experiments prove the ability of the memory to retrieve and maintain the non-classicality of the state, given a single photon input. Following the affirmation that, using this noise suppression technique, the memory can function at the single-photon level, I go on to consider how the temporal-spectral properties of a pulsed mode of light may be manipulated using the memory. There are two primary reasons for this investigation: 1) Increasing the efficiency of the read-in process by carving the optimum mode of the memory 2) Using the memory as a device operating in a high dimensional quantum information basis. The restrictions of such applications are considered and a method to test the efficacy of transformations in this basis is devised and experimentally tested. I also perform demonstrations of light storage using conventional temporal modes using a novel method of velocity selection within warm vapour. Finally I detail further experiments that are achievable with the Raman quantum memory given the progress that has been achieved during my DPhil research. The results show that the Raman memory is a viable candidate for a practical route towards low-noise quantum storage and for manipulation of temporal modes of light.
This thesis covers several topics in optical quantum computation. A quantum computer is a computational device which is able to manipulate information by performing unitary operations on some physical system whose state can be described as a vector (or mixture of vectors) in a Hilbert space. The basic unit of information, called the qubit, is considered to be a system with two orthogonal states, which are assigned logical values of 0 and 1. Photons make excellent candidates to serve as qubits. They have little interactions with the environment. Many operations can be performed using very simple linear optical devices such as beam splitters and phase shifters. Photons can easily be processed through circuit-like networks. Operations can be performed in very short times. Photons are ideally suited for the long-distance communication of quantum information. The great difficulty in constructing an optical quantum computer is that photons naturally interact weakly with one another. This thesis first gives a brief review of two early approaches to optical quantum computation. It will describe how any discrete unitary operation can be performed using a single photon and a network of beam splitters, and how the Kerr effect can be used to construct a two photon logic gate. Second, this work provides a thorough introduction to the linear optical quantum computer developed by Knill, Laflamme, and Milburn. It then presents this author's results on the reliability of this scheme when implemented using imperfect photon detectors. This author finds that quantum computers of this sort cannot be built using current technology. Third, this dissertation describes a method for constructing a linear optical quantum computer using nearly orthogonal coherent states of light as the qubits. It shows how a universal set of logic operations can be performed, including calculations of the fidelity with which these operations may be accomplished. It discusses methods for reducing and correcting errors and recovering from failed operations. Lastly it describes an analysis of the long distance transmission of the coherent state qubits and shows how transmission errors can be corrected.
Quantum optics is an extremely fruitful area of research in that it allows the probing of fundamental and basic science, as well as the opportunity to investigate potential applications that exploit these exotic phenomena. Entanglement is a uniquely quantum phenomenon that is a key feature of quantum mechanics. In this thesis we investigate the scalability of entangled states of light, as well as modest demonstrations of one-way quantum computations, based on a resource that exploits entanglement. Scalability has been a bottleneck of entanglement experiments since the first demonstrations began surfacing a few decades ago. In Part II of this thesis we investigate different methods of multiplexing quantum light modes in order to achieve a scalable architecture. 2 experiments are presented in spatial multiplexing, that lead to programmable linear optics networks that can produce up to 8 entangled modes. Building on this, and shifting domains we then demonstrate temporal multiplexing, where we entangle tens of thousands of quantum modes together in a highly entangled state called a cluster state. This is several orders of magnitude larger than any entangled state created to date, in any platform (be it atomic or electronic). The highly entangled cluster state is a universal resource for quantum computing, and we investigate a particular class of computations in Part III. We demonstrate that a cluster state consisting of only 4 highly entangled quantum modes is sufficient for universal 1-mode Gaussian quantum computing. Further, we demonstrate a tuneable entanglement gate that can be retrofitted to cluster states of arbitrary size or shape. Although the experiments in Part II and Part III are conceptually quite different, they employ very similar optical and electronic equipment. These experimental techniques as well as a survey of relevant quantum optics theory is presented in Part I.