Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Global Symposium on Millimeter-Waves

Development of a 0.85 THz Nb-AlN-NbN superconductor-insulator-superconductor mixer

Ming Yao, Jing Li, Dong Liu, Shaoliang Li, Sheng‐Cai Shi, Pavel Dmitriev, M. Yu. Fominsky, Valery Koshlets

Published May 1, 2017• 2 citations
Publisher

Abstract

China is planning to build a 5-m THz telescope named DATE5 at Dome A in Antarctica. The telescope will operate in 0.85 THz and 1.5 THz frequency bands. A waveguide superconductor-insulator-superconductor (SIS) mixer is developed for the 0.85 THz frequency band by utilizing parallel-connected tunnel junctions (PCTJ) with Nb/AlN/NbN trilayer and NbTiN/SiO2/Al microstrip tuning circuit on quartz substrate. Its frequency response is measured by a Fourier-transform spectrometer (FTS), showing an FWHM frequency coverage of 762-925 GHz. The measured uncorrected double sideband (DSB) receiver noise temperature is approximately equal to 450 K at 840 GHz. With the vacuum window and beamsplitter losses corrected, the receiver noise temperature is less than five times the quantum-limited noise. Detailed mixer design and measurement results will be presented.

DOI
10.1109/gsmm.2017.7970320

Related papers

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

Three Quanta Sensitivity Superconductor–Insulator–Superconductor Mixer for the 0.78–0.95 THz Band

Takafumi Kojima, M. Kroug, Masanori Takeda +5 more

We have successfully demonstrated a low-noise 0.78–0.95-THz waveguide mixer based on Nb/AlO x /Nb superconductor–insulator–superconductor (SIS) junctions integrated with an NbTiN/SiO 2 /Al superconducting inverted microstrip. The mixer employs a twin-junction tuning circuit and an impedance transformer which are designed to achieve both low noise and wideband operation. Corrected for optical input losses in front of the mixer, the double-sideband (DSB) noise temperature is below 120 K (<3 hf / k B ) around the local oscillator (LO) frequency of 0.88 THz and at an operating temperature of 2 K. The results represent state-of-the-art performance for mixers in the terahertz frequency range.

Applied Physics Express•Oct 9, 2009•26 citations

Noise performance of a 200–280 GHz mixer with Nb-AlN-NbN superconducting tunnel junctions

Boliang Liu, Dong Liu, Ming Yao +6 more

Superconductor–insulator–superconductor (SIS) mixers remain the choice of heterodyne mixers for single-dish telescopes and interferometers at millimeter and submillimeter wavelengths. Compared with conventional Nb/AlOx/Nb superconducting tunnel junctions, Nb/AlN/NbN ones have larger gap voltage and may reach critical-current density beyond 10kA/cm2, which are both of particularly interest in developing broadband SIS mixers. Here we report on the design and measurement of an SIS mixer based on Nb/AlN/NbN parallel connected twin junctions (PCTJ) incorporating NbTiN/SiO2/Al microstrip circuit. The junctions have a gap voltage of 3.18mV and a critical-current density of 15kA/cm2. The measured receiver noise temperature reach 5hν/kB among 200-260GHz band, and the mixer’s fractional bandwidth is about 40% centered at 230GHz.

Infrared, Millimeter-Wave, and Terahertz Technologies•Dec 16, 2022•0 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology - art. no. 684013

Jing Li, Takeda Masanon, Zhen Wang

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.

•Jan 1, 2008•0 citations

Development of a 0.5-THz Waveguide NbN-Based SIS Mixer

Jing Li, Masanori Takeda, Zhen Wang +1 more

This paper mainly reports the development of a 0.5-THz waveguide SIS (superconductor – insulator – superconductor) mixer, which adopts twin NbN-based SIS junctions (NbN/AlN/NbN) connected in parallel. The 0.5-THz waveguide NbN SIS mixer is designed incorporating with a 51-μm thick MgO substrate and a waveguide mixer mount with no back-short cavity. Detailed simulation results, junction fabrication process and junction I-V characteristics are described. Preliminary FTS (Fourier Transform Spectrometer) measurement results will also be discussed.

International Conference on Microwave and Millimeter Wave Technology (ICMMT)•Apr 1, 2007•4 citations

Terahertz high-sensitivity SIS mixer based on Nb–AlN–NbN hybrid superconducting tunnel junctions

Bo-Liang 博梁 Liu 刘, Dong 冬 Liu 刘, Ming Yao +8 more

The terahertz band, a unique segment of the electromagnetic spectrum, is crucial for observing the cold, dark universe and plays a pivotal role in cutting-edge scientific research, including the study of cosmic environments that support life and imaging black holes. High-sensitivity superconductor–insulator–superconductor (SIS) mixers are essential detectors for terahertz astronomical telescopes and interferometric arrays. Compared to the commonly used classical Nb/AlO x /Nb superconducting tunnel junction, the Nb/AlN/NbN hybrid superconducting tunnel junction has a higher energy gap voltage and can achieve a higher critical current density. This makes it particularly promising for the development of ultra-wideband, high-sensitivity coherent detectors or mixers in various scientific research fields. In this paper, we present a superconducting SIS mixer based on Nb/AlN/NbN parallel-connected twin junctions (PCTJ), which has a bandwidth extending up to 490 GHz–720 GHz. The best achieved double-sideband (DSB) noise temperature (sensitivity) is below three times the quantum noise level.

Chinese Physics B•Feb 22, 2024•6 citations
China is planning to build a 5-m THz telescope named DATE5 at Dome A in Antarctica. The telescope will operate in 0.85 THz and 1.5 THz frequency bands. A waveguide superconductor-insulator-superconductor (SIS) mixer is developed for the 0.85 THz frequency band by utilizing parallel-connected tunnel junctions (PCTJ) with Nb/AlN/NbN trilayer and NbTiN/SiO2/Al microstrip tuning circuit on quartz substrate. Its frequency response is measured by a Fourier-transform spectrometer (FTS), showing an FWHM frequency coverage of 762-925 GHz. The measured uncorrected double sideband (DSB) receiver noise temperature is approximately equal to 450 K at 840 GHz. With the vacuum window and beamsplitter losses corrected, the receiver noise temperature is less than five times the quantum-limited noise. Detailed mixer design and measurement results will be presented.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
We have successfully demonstrated a low-noise 0.78–0.95-THz waveguide mixer based on Nb/AlO x /Nb superconductor–insulator–superconductor (SIS) junctions integrated with an NbTiN/SiO 2 /Al superconducting inverted microstrip. The mixer employs a twin-junction tuning circuit and an impedance transformer which are designed to achieve both low noise and wideband operation. Corrected for optical input losses in front of the mixer, the double-sideband (DSB) noise temperature is below 120 K (<3 hf / k B ) around the local oscillator (LO) frequency of 0.88 THz and at an operating temperature of 2 K. The results represent state-of-the-art performance for mixers in the terahertz frequency range.
Superconductor–insulator–superconductor (SIS) mixers remain the choice of heterodyne mixers for single-dish telescopes and interferometers at millimeter and submillimeter wavelengths. Compared with conventional Nb/AlOx/Nb superconducting tunnel junctions, Nb/AlN/NbN ones have larger gap voltage and may reach critical-current density beyond 10kA/cm2, which are both of particularly interest in developing broadband SIS mixers. Here we report on the design and measurement of an SIS mixer based on Nb/AlN/NbN parallel connected twin junctions (PCTJ) incorporating NbTiN/SiO2/Al microstrip circuit. The junctions have a gap voltage of 3.18mV and a critical-current density of 15kA/cm2. The measured receiver noise temperature reach 5hν/kB among 200-260GHz band, and the mixer’s fractional bandwidth is about 40% centered at 230GHz.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.
This paper mainly reports the development of a 0.5-THz waveguide SIS (superconductor – insulator – superconductor) mixer, which adopts twin NbN-based SIS junctions (NbN/AlN/NbN) connected in parallel. The 0.5-THz waveguide NbN SIS mixer is designed incorporating with a 51-μm thick MgO substrate and a waveguide mixer mount with no back-short cavity. Detailed simulation results, junction fabrication process and junction I-V characteristics are described. Preliminary FTS (Fourier Transform Spectrometer) measurement results will also be discussed.
The terahertz band, a unique segment of the electromagnetic spectrum, is crucial for observing the cold, dark universe and plays a pivotal role in cutting-edge scientific research, including the study of cosmic environments that support life and imaging black holes. High-sensitivity superconductor–insulator–superconductor (SIS) mixers are essential detectors for terahertz astronomical telescopes and interferometric arrays. Compared to the commonly used classical Nb/AlO x /Nb superconducting tunnel junction, the Nb/AlN/NbN hybrid superconducting tunnel junction has a higher energy gap voltage and can achieve a higher critical current density. This makes it particularly promising for the development of ultra-wideband, high-sensitivity coherent detectors or mixers in various scientific research fields. In this paper, we present a superconducting SIS mixer based on Nb/AlN/NbN parallel-connected twin junctions (PCTJ), which has a bandwidth extending up to 490 GHz–720 GHz. The best achieved double-sideband (DSB) noise temperature (sensitivity) is below three times the quantum noise level.