Physics is a science of measurement. In the measurement of physical quantities, many are in the form of continuous variables, which have a continuous spectrum of measurement outcomes. The amplitude and phase of an optical field are continuous at least in classical sense. Classically, the physical quantities are well defined and can in principle be measured with arbitrary precision. This is true even for continuous variables. In quantum mechanics, however, energy is quantized. Intensity, for example, is directly related to the photon number after quantization of the fields and has discrete values when we measure it. This discreteness will ultimately lead to measurement uncertainties of continuous variables. This is somewhat similar to the error generated in digitizing an analog signal in electrical engineering. Furthermore, measurement of an optical field is usually done with photo-detector by converting light into electrical signal. As we discussed in the previous chapter that the origin of shot noise in photocurrents is due to the discreteness of electrons generated by the illumination of light. This has nothing to do with quantization of the optical field: shot noise exists even in the semi-classical theory of photo-detection.
Physics is a science of measurement. In the measurement of physical quantities, many are in the form of continuous variables, which have a continuous spectrum of measurement outcomes. The amplitude and phase of an optical field are continuous at least in classical sense. Classically, the physical quantities are well defined and can in principle be measured with arbitrary precision. This is true even for continuous variables. In quantum mechanics, however, energy is quantized. Intensity, for example, is directly related to the photon number after quantization of the fields and has discrete values when we measure it. This discreteness will ultimately lead to measurement uncertainties of continuous variables. This is somewhat similar to the error generated in digitizing an analog signal in electrical engineering. Furthermore, measurement of an optical field is usually done with photo-detector by converting light into electrical signal. As we discussed in the previous chapter that the origin of shot noise in photocurrents is due to the discreteness of electrons generated by the illumination of light. This has nothing to do with quantization of the optical field: shot noise exists even in the semi-classical theory of photo-detection.
Observables of quantum systems can posses either a discrete or a continuous spectrum. For example, upon measurements of the photon number of a light state, discrete outcomes will result whereas measurements of the light's quadrature amplitudes result in continuous outcomes. If one uses the continuous degree of freedom of a quantum system either for encoding, processing or detecting information, one enters the field of continuous variable (CV) quantum information processing. In this paper we review the basic principles of CV quantum information processing with main focus on recent developments in the field. We will be addressing the three main stages of a quantum informational system; the preparation stage where quantum information is encoded into CVs of coherent states and single photon states, the processing stage where CV information is manipulated to carry out a specified protocol and a detection stage where CV information is measured using homodyne detection or photon counting.
Introduction In previous chapters we studied wave propagation in fiber OPAs from a classical standpoint, i.e. starting from Maxwell's equations. That approach provides only a partial view of the rich nature of the electromagnetic field, namely its wave nature. However, a complete description of the electromagnetic field requires quantum mechanics. This quantum description of the electromagnetic field (called quantum electrodynamics, or QED) predicts fluctuations in measurable quantities due to the Heisenberg uncertainty principle and sets ultimate limits on the performance of devices such as optical amplifiers. A remarkable result of this theory is that the statistics and thus the noise performance of a system are affected by the quantum statistics of the source and by the physical measurement that is made. Thus a different analysis is needed depending on whether homodyne, heterodyne, or direct detection (where the field simply impinges on a photodiode) is used. Direct detection reveals the particle nature of the electromagnetic field. More specifically, energy arrives in discrete units, called photons, each of which may create an electron–hole pair in a semiconductor photodetector. In particular, the number of photons in an optical pulse can be thought of as a random variable having a mean and a variance. By deriving the mean and variance of the photocurrent that would be present if one performed direct detection of ideal laser light at the input of an optical amplifier and then a similar measurement at its exit, one can quantify the degradation of the signal-to-noise ratio (SNR) caused by the amplifier.
Basic concepts of quantum optics are introduced in this chapter. In the beginning, we give a review of the basic quantum mechanics. Then, we perform quantization of an electromagnetic field, which naturally introduces the concept of mode and quadrature. After that, we introduce basic quantum states of light and their phase space representation. Quantum operations in the continuous-variable system and their universality are also explained. To obtain the values of the physical quantities, we have to measure our quantum systems. In the optical continuous-variable system, homodyne measurement and photon number measurement are among the most common measurements that are also discussed here. Finally, we introduce the concept of quantum entanglement, which is one of the central concepts in quantum computation.
Abstract Observables of quantum systems can possess either a discrete or a continuous spectrum. For example, upon measurements of the photon number of a light state, discrete outcomes will result whereas measurements of the light's quadrature amplitudes result in continuous outcomes. If one uses the continuous degree of freedom of a quantum system for encoding, processing or detecting information, one enters the field of continuous‐variable (CV) quantum information processing. In this paper we review the basic principles of CV quantum information processing with main focus on recent developments in the field. We will be addressing the three main stages of a quantum information system; the preparation stage where quantum information is encoded into CVs of coherent states and single‐photon states, the processing stage where CV information is manipulated to carry out a specified protocol and a detection stage where CV information is measured using homodyne detection or photon counting.
We mentioned in Chapter 7 that when the intensity is relatively large, the photoelectric pulses generated by the detector will overlap and form a continuous photoelectric current. This is the situation to be discussed in this chapter. The methods of measurement and analysis will be totally different from those in Chapter 7. For a continuous photocurrent, we cannot use a pulse discriminator to filter out the contribution from the dark current as in Chapter 7. But because of the randomness of the dark current, its contributions are mostly in the low frequency regime in the form of 1/ f noise. So, we can use the method of spectral analysis to filter it out. Therefore, spectral analysis is the main method in the detection of a strong continuous optical field.
The implementation of optical quantum technologies requires precise and complete characterisation tools for multi-mode nonclassical states of light. In this thesis, we propose and we implement experimentally three applications of optical quantum measurements, which combine aspects of light that are described by both discrete and continuous variables. In the rst part of this thesis, we present a new scheme for interferometric phase estimation, which uses double homodyne measurements as an alternative to photon counting. We show that, without requiring a phase reference, this scheme can achieve the optimum phase estimation precision for all path-symmetric probe states with a de ned number of photons. Furthermore, the estimation procedure is robust against state preparation imperfections, and naturally yields the same precision for all values of the estimated phase. We implement the proposed scheme experimentally, using a polarisation interferometer probed by a single-photon signal, and temporally multiplexing a single homodyne detector. We repeat the experiment with classical probe states. For both cases, we demonstrate the accuracy and precision of the proposed method, our implementation deviating by 5% from the fundamental precision bound. We demonstrate that, in our scheme, single-photon probe states can provide better precision than weak coherent ones. These results indicate that hybrid quantum resources, which combine tools from the discrete and continuous-variable paradigms, can play a signi cant role in practical sensing scenarios. In the second part of this thesis, we present an application in the eld of information thermodynamics, reporting an experimental realisation, in a photonic setup, of Maxwell's demon. We show that a measurement at the few-photons level, followed by a feed-forward operation, allows the extraction of work from intense thermal light into an electric circuit. The interpretation of the experiment leads us to the derivation of an equality relating work extraction to information acquired by measurement. We prove a bound using this relation, and show that it is in agreement with the experimental results. Our work puts forward photonic systems as a platform for experiments in the eld of information thermodynamics. In the third part of this thesis, we present a new method for the characterisation of broadband parametric down-conversion, based on stimulated frequency generation. In particular, we analyse the information contained in the frequency generation produced in the same mode as a seeding beam, for a type-II down-conversion process. We derive a model for this signal and argue that its detection can provide a useful characterisation tool in the high-gain regime, allowing for a self-referenced estimation of squeezing gain. We propose a method for measuring this signal and present an experimental realisation, based on a wave-guided source, at telecommunication wavelengths. Our experimental results demonstrate that the proposed measurement is an e ective experimental handle for discerning the intricate structure of broadband parametric down-conversion.