Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Sensors

Physical Layer Secret-Key Generation Scheme for Transportation Security Sensor Network

Bin Yang, Jianfeng Zhang

Published Jun 28, 2017• 7 citations
Publisher

Abstract

Wireless Sensor Networks (WSNs) are widely used in different disciplines, including transportation systems, agriculture field environment monitoring, healthcare systems, and industrial monitoring. The security challenge of the wireless communication link between sensor nodes is critical in WSNs. In this paper, we propose a new physical layer secret-key generation scheme for transportation security sensor network. The scheme is based on the cooperation of all the sensor nodes, thus avoiding the key distribution process, which increases the security of the system. Different passive and active attack models are analyzed in this paper. We also prove that when the cooperative node number is large enough, even when the eavesdropper is equipped with multiple antennas, the secret-key is still secure. Numerical results are performed to show the efficiency of the proposed scheme.

DOI
10.3390/s17071524

Related papers

Secure Physical Layer Communication Techniques for Wireless Sensor Networks

Jinfe Regash

The applications of Wireless Sensor Networks (WSNs) are widespread in areas such as environmental monitoring, industrial automation, healthcare and smart infrastructures, where secure and reliable wireless communication is essential. The nature of a wireless channel, however, lends itself to the problem of eavesdropper-directed wireless sensor networking, interception and unauthorized access. This paper presents a secure physical layer communication system featuring the combination of channel estimator, physical layer key generator, artificial noise generator and adaptive power allocator to increase the confidentiality of physical layer communications and simultaneously achieve energy efficiency. A hybrid security mechanism is used, which takes advantage of the channel characteristics to create secret keys and to make the eavesdropper's signal reception worse by introducing controlled artificial noise. Key performance parameters considered for simulation-based evaluation are secrecy capacity, BER, PDR, Throughput, Energy consumption and Network lifetime. Results show that the secrecy capacity is 6.3 bps/Hz, the packet delivery ratio is 98.7%, the bit error rate is 10⁻⁶, and the network lifetime is 1675 rounds. The proposed framework is much more effective in terms of both communication security and energy efficiency than the traditional WSNs security schemes.

Electronics, Communications, and Computing Summit•Jun 13, 2026•0 citations

A Cluster-based Cooperative Jamming Scheme for Secure Communication in Wireless Sensor Network

Tian Zhu, Fei Tong

The environment of wireless sensor networks (WSNs) makes the communication not only have the broadcast nature of wireless transmission, but also be limited to the low power and communication capability of sensor equipment. Both of them make it hard to ensure the confidentiality of communication. In this paper, we propose a cluster-based cooperative jamming scheme based on physical layer security for WSNs. The mathematical principle of the scheme is based on the design principle of code division multiple access. By using the orthogonality of orthogonal vectors, the legitimate receiver can effectively eliminate the noise, which is generated by the cooperative jamming nodes to disturb the eavesdropper. This scheme enables the legitimate receiver to ensure a strong communication confidentiality even if there is no location or channel advantage comparing with eavesdroppers. Through extensive simulations, the security performance of the proposed scheme is investigated in terms of secrecy rate.

IEEE Vehicular Technology Conference•Nov 1, 2020•5 citations

Scalable Secret Key Generation for Wireless Sensor Networks

Ufuk Altun, Semiha Tedik Başaran, Güneş Karabulut Kurt +1 more

Future sensor networks require energy and bandwidth efficient designs to support the growing number of nodes. The security aspect is often neglected due to the extra computational burden imposed on the sensor nodes. In this article, we propose a secret key generation method for wireless sensor networks by using the physical layer features. This key generation method is based on the superposition property of wireless channels. The proposed method exploits the multiple access property of the wireless channel with simultaneous transmissions as in theanalog function computationtechnique to solve the latency and scarce bandwidth problems of highly populated dense networks. All nodes use the same time and frequency block to provide scalability that islinearly proportionalto the number of nodes. The proposed method also benefits from the network density to provide security against eavesdroppers that aim to sniff the secret key from the channel. The security of the proposed method against eavesdroppers is analytically studied. Moreover, their application in multiple layers is investigated. The presented results have shown that there is a tradeoff between the total power consumption and total used bandwidth for secret key generation. Lastly, the error probability of the generated keys due to thermal noise and channel estimation error is investigated with computer simulations and compared with broadcasting-based benchmark model.

IEEE Systems Journal•Aug 24, 2022•14 citations

A Novel Physical Layer Secret Key Generation Method for Wireless Sensor Networks

Mehmet Ali Aygtil, Hakan Ali Çırpan, Hüseyin Arslan

Wireless sensor networks are indispensable across various applications, from environmental surveillance to indus-trial automation, owing to their ability to collect and transmit data autonomously. However, due to the broadcast nature of wireless systems, these systems are vulnerable to eavesdropping attacks. Recently, channel-based secret key generation methods have been widely used in the literature. In these methods, Alice and Bob generate random signals and share these signals with each other. Then, using the secret key paired multiplication with the channel between them, a secret key is shared between legitimate users, while illegitimate nodes cannot access the key. However, these methods consider only two users. This paper proposes a novel method for multiple users. Extensive simulation proves the effectiveness of the proposed method. However, when the number of users increases, the performance of the proposed method decreases.

IEEE International Black Sea Conference on Communications and Networking•Jun 24, 2024•2 citations

A Breakthrough Authentication Protocol for Fortifying IoT-Cloud Security

K. Subha, S. Hari Prasath, Kumar Roshan +1 more

Abstract: Physical layer key generation, leveraging the reciprocity and randomness of wireless fading channels, has garnered significant research interest in recent years. While theoretical studies have demonstrated its potential to generate informationtheoretically secure keys, challenges remain in translating theory into practice. This paper provides an overview of the physical layer key generation process and discusses its practical challenges. Various passive and active attacks are analyzed and evaluated through numerical studies. A new key generation scheme using random probing signals and combining usergenerated randomness with channel randomness is introduced to counteract active attacks. Numerical results demonstrate that the proposed scheme achieves higher security strength than existing schemes using constant probing signals under active attacks. Secret-key generation relying on wireless channel reciprocity is an intriguing solution as it can be efficiently implemented at the physical layer of emerging wireless communication networks, while providing information-theoretic security guarantees. In this paper, we investigate and compare the secret-key capacity based on the sampling of the entire complex channel state information (CSI) or only its envelope, the received signal strength (RSS).

International Journal for Research in Applied Science and Engineering Technology•May 4, 2024•0 citations

An Efficient Group Secret Key Generation Scheme for Wireless Sensor Network

Jiaqi Xiong, Xin Zeng, Xiaoping Xue +1 more

The Internet of Things technology is one of the important directions of Smart Grid research, involving many wireless sensors and communication facilities, and has high requirements for security. The physical layer security technology can effectively solve the security problems under wireless communication. As the most common application scenario of wireless communication is multi-node wireless network communication, group secret key (GSK) based on physical layer security and information theory security is gradually attracting investigator’s interest. In this paper, a novel physical layer GSK generation scheme based on code-domain exchange of channel information in mesh network is proposed. Instead of traditional side-information exchange in symbol-domain, error-correcting code is applied to finish information exchange and reconciliation simultaneously in code-domain. Each node processes the known channel bit sequence and then encodes it to generate a check sequence. After broadcasting the check bit sequence to other nodes, each node decodes the received check bit sequences to obtained the unknown channel information. The simulation results show that the scheme can effectively reduce the times of information exchanges while keeping a good performance including low bit error rate and low block error rate.

International Conference on Wireless Communications and Smart Grid (ICWCSG)•Aug 1, 2021•0 citations
Wireless Sensor Networks (WSNs) are widely used in different disciplines, including transportation systems, agriculture field environment monitoring, healthcare systems, and industrial monitoring. The security challenge of the wireless communication link between sensor nodes is critical in WSNs. In this paper, we propose a new physical layer secret-key generation scheme for transportation security sensor network. The scheme is based on the cooperation of all the sensor nodes, thus avoiding the key distribution process, which increases the security of the system. Different passive and active attack models are analyzed in this paper. We also prove that when the cooperative node number is large enough, even when the eavesdropper is equipped with multiple antennas, the secret-key is still secure. Numerical results are performed to show the efficiency of the proposed scheme.
The applications of Wireless Sensor Networks (WSNs) are widespread in areas such as environmental monitoring, industrial automation, healthcare and smart infrastructures, where secure and reliable wireless communication is essential. The nature of a wireless channel, however, lends itself to the problem of eavesdropper-directed wireless sensor networking, interception and unauthorized access. This paper presents a secure physical layer communication system featuring the combination of channel estimator, physical layer key generator, artificial noise generator and adaptive power allocator to increase the confidentiality of physical layer communications and simultaneously achieve energy efficiency. A hybrid security mechanism is used, which takes advantage of the channel characteristics to create secret keys and to make the eavesdropper's signal reception worse by introducing controlled artificial noise. Key performance parameters considered for simulation-based evaluation are secrecy capacity, BER, PDR, Throughput, Energy consumption and Network lifetime. Results show that the secrecy capacity is 6.3 bps/Hz, the packet delivery ratio is 98.7%, the bit error rate is 10⁻⁶, and the network lifetime is 1675 rounds. The proposed framework is much more effective in terms of both communication security and energy efficiency than the traditional WSNs security schemes.
The environment of wireless sensor networks (WSNs) makes the communication not only have the broadcast nature of wireless transmission, but also be limited to the low power and communication capability of sensor equipment. Both of them make it hard to ensure the confidentiality of communication. In this paper, we propose a cluster-based cooperative jamming scheme based on physical layer security for WSNs. The mathematical principle of the scheme is based on the design principle of code division multiple access. By using the orthogonality of orthogonal vectors, the legitimate receiver can effectively eliminate the noise, which is generated by the cooperative jamming nodes to disturb the eavesdropper. This scheme enables the legitimate receiver to ensure a strong communication confidentiality even if there is no location or channel advantage comparing with eavesdroppers. Through extensive simulations, the security performance of the proposed scheme is investigated in terms of secrecy rate.
Future sensor networks require energy and bandwidth efficient designs to support the growing number of nodes. The security aspect is often neglected due to the extra computational burden imposed on the sensor nodes. In this article, we propose a secret key generation method for wireless sensor networks by using the physical layer features. This key generation method is based on the superposition property of wireless channels. The proposed method exploits the multiple access property of the wireless channel with simultaneous transmissions as in theanalog function computationtechnique to solve the latency and scarce bandwidth problems of highly populated dense networks. All nodes use the same time and frequency block to provide scalability that islinearly proportionalto the number of nodes. The proposed method also benefits from the network density to provide security against eavesdroppers that aim to sniff the secret key from the channel. The security of the proposed method against eavesdroppers is analytically studied. Moreover, their application in multiple layers is investigated. The presented results have shown that there is a tradeoff between the total power consumption and total used bandwidth for secret key generation. Lastly, the error probability of the generated keys due to thermal noise and channel estimation error is investigated with computer simulations and compared with broadcasting-based benchmark model.
Wireless sensor networks are indispensable across various applications, from environmental surveillance to indus-trial automation, owing to their ability to collect and transmit data autonomously. However, due to the broadcast nature of wireless systems, these systems are vulnerable to eavesdropping attacks. Recently, channel-based secret key generation methods have been widely used in the literature. In these methods, Alice and Bob generate random signals and share these signals with each other. Then, using the secret key paired multiplication with the channel between them, a secret key is shared between legitimate users, while illegitimate nodes cannot access the key. However, these methods consider only two users. This paper proposes a novel method for multiple users. Extensive simulation proves the effectiveness of the proposed method. However, when the number of users increases, the performance of the proposed method decreases.
Abstract: Physical layer key generation, leveraging the reciprocity and randomness of wireless fading channels, has garnered significant research interest in recent years. While theoretical studies have demonstrated its potential to generate informationtheoretically secure keys, challenges remain in translating theory into practice. This paper provides an overview of the physical layer key generation process and discusses its practical challenges. Various passive and active attacks are analyzed and evaluated through numerical studies. A new key generation scheme using random probing signals and combining usergenerated randomness with channel randomness is introduced to counteract active attacks. Numerical results demonstrate that the proposed scheme achieves higher security strength than existing schemes using constant probing signals under active attacks. Secret-key generation relying on wireless channel reciprocity is an intriguing solution as it can be efficiently implemented at the physical layer of emerging wireless communication networks, while providing information-theoretic security guarantees. In this paper, we investigate and compare the secret-key capacity based on the sampling of the entire complex channel state information (CSI) or only its envelope, the received signal strength (RSS).
The Internet of Things technology is one of the important directions of Smart Grid research, involving many wireless sensors and communication facilities, and has high requirements for security. The physical layer security technology can effectively solve the security problems under wireless communication. As the most common application scenario of wireless communication is multi-node wireless network communication, group secret key (GSK) based on physical layer security and information theory security is gradually attracting investigator’s interest. In this paper, a novel physical layer GSK generation scheme based on code-domain exchange of channel information in mesh network is proposed. Instead of traditional side-information exchange in symbol-domain, error-correcting code is applied to finish information exchange and reconciliation simultaneously in code-domain. Each node processes the known channel bit sequence and then encodes it to generate a check sequence. After broadcasting the check bit sequence to other nodes, each node decodes the received check bit sequences to obtained the unknown channel information. The simulation results show that the scheme can effectively reduce the times of information exchanges while keeping a good performance including low bit error rate and low block error rate.