Heralded single photon sources are often implemented using spontaneous parametric downconversion, but their quality can be restricted by optical loss, double pair emission and detector dark counts. Here, we show that the performance of such sources can be improved using cascaded downconversion, by providing a second trigger signal to herald the presence of a single photon, thereby reducing the effects of detector dark counts. We find that for a setup with fixed detectors, an improved heralded second-order correlation function
g(2) can always be achieved with cascaded downconversion given sufficient efficiency for the second downconversion, even for equal single-photon production rates. Furthermore, the minimal
g(2) value is unchanged for a large range in pump beam intensity. These results are interesting for applications where achieving low, stable values of
g(2) is of primary importance.
Heralded single photon sources are the subject of intense research owing to their usefulness in metrology and quantum information. These are often created using a pair of photons produced by spontaneous parametric downconversion (SPDC), from which one photon is used to certify the presence of the other. However, multiple-pair production and detector dark counts limit the quality of such sources. Here, we investigate whether cascading two downconversion events to precertify the presence of a photon pair would allow us to reduce these effects. Using analytical calculations and simulations, we find that higher purity photons, as quantified by the heralded second order correlation function, can be obtained for some detector performance ranges.
Three-photon states generated via cascaded spontaneous parametric downconversion provide a direct route to multipartite entanglement. However, current implementations require careful spectral matching between successive nonlinear stages, which constrains the choice of downconversion sources. In this work, we show that coincidence-based spectral filtering relaxes this requirement by conditionally tailoring the spectrum of the pump photon entering the second stage. By filtering the herald photon, we conditionally tailor the spectrum of its partner to match the acceptance bandwidth of the secondary nonlinear process, enabling efficient coupling between broadband and narrowband stages without altering the sources themselves. Using an electro-optically gated spectrometer, we directly measure the conditional spectra that govern the cascaded process, allowing us to quantitatively predict the enhancement in second-stage conversion probability per detected herald. We then verify this prediction through photon-triplet measurements, demonstrating improved performance at fixed heralding rates. Our results establish coincidence-based spectral engineering as a practical tool for optimizing cascaded downconversion, particularly in regimes limited by detector saturation or spectral incompatibility.