This thesis investigates several different aspects of the physics of few state quantum systems and their use in information processing applications. The main focus is performing high precision computations or experiments using imperfect quantum systems. Specifically looking at methods to calibrate a quantum system once it has been manufactured or performing useful tasks, using a quantum system with only limited spatial or temporal coherence.\n \n A novel method for characterising an unknown two-state Hamiltonian is presented which is based on the measurement of coherent oscillations. The method is subsequently extended to include the effects of decoherence and enable the estimation of uncertainties. Using the uncertainty estimates, the achievable precision for a given number of measurements is computed. This method is tested experimentally using the nitrogen-vacancy defect in diamond as an example of a two-state quantum system of interest for quantum information processing. The method of characterisation is extended to higher dimensional systems and this is illustrated using the Heisenberg interaction between spins as an example.\n \n The use of buried donors in silicon is investigated as an architecture for realising quantum-dot cellular automata as an example of quantum systems used for classical information processing. The interaction strengths and time scales are calculated and both coherent and incoherent evolution are assessed as possible switching mechanisms. The effects of decoherence on the operation of a single cell and the scaling behaviour of a line of cells is investigated.\n \n The use of type-II quantum computers for simulating classical systems is studied as an application of small scale quantum computing. An algorithm is developed for simulating the classical Ising model using Metropolis Monte-Carlo where random number generation is incorporated using quantum superposition. This suggests that several new algorithms could be developed for a type-II quantum computer based on probabilistic cellular automata.
This thesis investigates several different aspects of the physics of few state quantum systems and their use in information processing applications. The main focus is performing high precision computations or experiments using imperfect quantum systems. Specifically looking at methods to calibrate a quantum system once it has been manufactured or performing useful tasks, using a quantum system with only limited spatial or temporal coherence.\n \n A novel method for characterising an unknown two-state Hamiltonian is presented which is based on the measurement of coherent oscillations. The method is subsequently extended to include the effects of decoherence and enable the estimation of uncertainties. Using the uncertainty estimates, the achievable precision for a given number of measurements is computed. This method is tested experimentally using the nitrogen-vacancy defect in diamond as an example of a two-state quantum system of interest for quantum information processing. The method of characterisation is extended to higher dimensional systems and this is illustrated using the Heisenberg interaction between spins as an example.\n \n The use of buried donors in silicon is investigated as an architecture for realising quantum-dot cellular automata as an example of quantum systems used for classical information processing. The interaction strengths and time scales are calculated and both coherent and incoherent evolution are assessed as possible switching mechanisms. The effects of decoherence on the operation of a single cell and the scaling behaviour of a line of cells is investigated.\n \n The use of type-II quantum computers for simulating classical systems is studied as an application of small scale quantum computing. An algorithm is developed for simulating the classical Ising model using Metropolis Monte-Carlo where random number generation is incorporated using quantum superposition. This suggests that several new algorithms could be developed for a type-II quantum computer based on probabilistic cellular automata.
For several decades it has been appreciated that quantum computers hold incredible promise to perform calculations intractable to classical computation. However, this promise has be slow to realize. Dozens of quantum systems are currently being investigated for use in quantum information processing - none of which have yet demonstrated algorithms involving more than a handful of qubits and it remains unclear which, if any, of these systems will ultimately compose a scalable, robust quantum information processing architecture. In this thesis we employ analytical, optimal and algebraic control techniques to evaluate various quantum systems for their potential use in quantum information processing. In doing so, we have additionally identified several novel characterization procedures capable of probing both the coherent and incoherent dynamics of quantum systems. The first part of this thesis discusses work motivated by attempts to utilize donor qubits in silicon as quantum bits. We first propose a measurement of the state of a single donor electron spin using two-dimensional electron gas of a field-effect transistor and electrically detected magnetic resonance. We analyze the potential sensitivity of this measurement and show that it is a quantum nondemolition measurement of an electron-encoded state. We then present the first of two novel qubit characterization procedures. We consider the problem of rapidly characterizing a large number of similarly prepared qubits using techniques from optimal experiment design. All qubits are assumed to evolve according to the same physical processes, though the Hamiltonian parameters may vary from device to device - an inevitability in solid state qubits. We use the Cram\\'er-Rao bound on the variance of a point estimator to construct the optimal series of experiments to estimate these free parameters, and present a complete analysis of the optimal experimental configuration. Though applied to dipole- and exchange-coupled qubits, this technique is widely applicable to other systems. The second part of the thesis discusses the role that control can play in measuring and mitigating noise in qubit systems. Our first result describes a method for quickly simulating the effects of arbitrary markovian noise on qubit systems through the use of a numerically optimized, multi-state Markovian fluctuator. This ability to rapidly simulate the noisy qubit evolution allows us to compute control sequences capable of maximally decoupling the qubit from the noise source. We then introduce the second characterization procedure of the these, showing that a single measurable and controllable qubit may act as a spectrometer of dephasing noise. We show that the formalism of dynamical decoupling can be used to estimate the short-time correlation function of the noise source, while long time correlations may be estimated by a very simple series of free evolution experiments. This technique is applicable to the wide range of physical implementations which suffer from dephasing noise.The final part of this thesis demonstrates that trapped neutral atoms may be utilized for the robust simulation of complex systems exhibiting a topological phase. We present a method to simulate the toric code Hamiltonian stroboscopically, and demonstrate that our technique preserves the ground state degeneracy . Furthermore, we introduce a dissipative mechanism allowing for thermalization of the system to a finite temperature or direct cooling to the ground state manifold.
We analyze the basic aspects of the quantum information theory, namely the quantum version
of the theory that is behind all the classical implementations like computers and communications.
We focus on quantum computation, defining its fundamental unit: the qubit,
namely a quantum two-level system that will be described in detail in this thesis. We then
concentrate on the possible transformations gates that can be applied to qubits, both unitary
and non-unitary ones.
The challenges in the construction of qubits are impressive: in particular, it is difficult to
isolate the system from the environment. This interaction is modeled by non-unitary transformations.
The characteristic times connected to these processes are the relaxation time, the
time in which a state decays in another state, and the decoherence time, the time in which
quantum coherence is lost. These times are fundamental in quantum computing since they
quantify how many operations can be performed on qubits and still obtain reliable results.
We measure these characteristic times on the IBM quantum processor ’ibmq_16_melbourne’
performing three different experiments: one for the relaxation time and two for the decoherence
time, namely Ramsey and Echo experiments.
Finally, we implement a quantum algorithm, an algorithm that uses the resources of quantum
mechanics, like entanglement. We focus on finding a protocol to define the quantum
version of the elementary cellular automata, the quantum elementary cellular automata, and
run it on the IBM processor. They are dynamical systems defined on a lattice in which the
evolution is defined using simple local update rules.
Comparing the physical results with theoretical expectations and noise-affected simulations
we show the performance of the IBM processor.
Discrete time quantum lattice systems recently have come into the focus of quantum computation because they provide a versatile tool for many different applications and they are potentially implementable in current experimental realizations. In this thesis we study the fundamental structures of such quantum lattice systems as well as consequences of experimental imperfections. Essentially, there are two models of discrete time quantum lattice systems, namely quantum cellular automata and quantum walks, which are quantum versions of their classical counterparts, i.e., cellular automata and random walks. In both cases, the dynamics acts locally on the lattice and is usually also translationally invariant. The main difference between these structures is that quantum cellular automata can describe the dynamics of many interacting particles, where quantum walks describe the evolution of a single particle. The first part of this thesis is devoted to quantum cellular automata. We characterize one-dimensional quantum cellular automata in terms of an index theory up to local deformations. Further, we characterize in detail a subclass of quantum cellular automata by requiring that Pauli operators are mapped to Pauli operators. This structure can be understood in terms of certain classical cellular automata. The second part of this thesis is concerned with quantum walks. We identify a quantum walk with the one-particle sector of a quantum cellular automaton. We also establish an index theory for quantum walks and we discuss decoherent quantum walks, i.e., the behavior of quantum walks with experimental imperfections.
Over the last few decades, quantised excitations of the electromagnetic field have proven to be an ideal system with which to investigate and harness quantum optical phenomena. The techniques developed have enabled fundamental tests of quantum mechanics as well as practical applications in quantum metrology and quantum information processing. Advancing to larger-scale entangled quantum systems will open up new regimes of quantum many-body physics, allowing us to probe the limits of quantum mechanics and enabling truly quantum-enhanced technologies. However, moving towards this goal will require further experimental and theoretical innovations. The work described in this thesis focuses on several different aspects of optical quantum information, but are ultimately all linked by this long-term aim. The first part of this thesis describes a novel method for strain-based active control of quantum optical circuits and a new method for the characterisation of high efficiency detectors. Building on this, I discuss in detail two different fields of quantum optics that stand to benefit from these techniques. I initially consider quantum-enhanced metrology, including work aimed towards demonstrating a truly better-than-classical phase measurement, and a theoretical exploration of multiple-phase estimation. Finally, I focus on linear-optical quantum information processing, exploring in detail the use of time-frequency encodings for quantum computing.
Quantum technologies harness the properties of controlled quantum mechanical systems for applications in computation, communication and metrology, and enable us to further our understanding of fundamental physics. Quantum hardware is designed to manipulate complex and fragile many-particle quantum states, which requires exquisite control machinery, advanced software and near-complete isolation from the surrounding environment. With sufficient capabilities, quantum computers with large registers of quantum bits will perform classically intractable calculations such as quantum chemistry simulations. Quantum key distribution will provide completely secure communications across the world and quantum metrology will enable measurement precision beyond today's capabilities. While quantum technologies are far from surpassing classical hardware today, the vision and potential impact has sparked a world-wide research effort, both theoretical and experimental, to develop a quantum computer. The most sophisticated current quantum technologies have control over small numbers of quantum bits and are limited by environmental decoherence processes. While progress in developing quantum hardware is ongoing, designing and demonstrating new algorithms and protocols for quantum information is a thriving research field. Photonics provides an ideal platform for small-scale proof-of-concept quantum experiments, which are the focus of this thesis. In the coming decades, we will see the realisation of quantum hardware capable of applications that outperform any classical computer. In this thesis, I present several protocols and algorithms for quantum information science and technology, which are implemented in quantum photonic experiments. The applications of these works include robust quantum tomography, quantum state relocation, quantum enhanced data recovery and probing fundamental causality in quantum mechanics. The works presented here are based on two photon experiments from a prototypical spontaneous parametric down-conversion source, which provides an excellent test-bed for quantum information experiments. Photons can be used to encode quantum information in a range of different degrees of freedom. This versatility, along with compatibility with existing technology gives photonics a great advantage in the development of quantum hardware.
In this thesis, I present experimental and theoretical work which assesses and develops a range of tools that are required for performing quantum information processing, particularly in photonic systems. I investigate the three degrees of freedom of a single photon—its polarisation, spatialmomentum and time-frequency distributions. For polarisation, I show that using wave plates to implement arbitrary, single-qubit rotations is more complicated than is commonly appreciated. In the spatial-momentum and time-frequency domains, I develop ways to perform tomographic analysis of quantum states, and I report the first demonstrations of these techniques. In the time-frequency domain, the tomography technique utilises entanglement in the photon polarisation as a resource to store and provide access to the time-frequency information. In my first two experiments, I use spontaneous parametric down-conversion to produce entanglement between pairs of single photons in all three degrees of freedom. I demonstrate the first characterisation of entanglement in spatial modes and the time-frequency domain, the first quantitative measurement of entangled qutrit states, and the highest quality entangled states yet measured in both polarisation and spatial modes. I also report the first realisation of complete hyperentanglement, and a full, black-box tomography of a 36-dimensional two-photon state—the largest system to be characterised in this way to date. In my final experiment, I model and implement a new architecture for a controlled-Z gate which is much simpler to align than previous implementations. This gate requires only one non-classical interference condition, the visibility of which is the main limitation to its performance. I show that the gate operates effectively as a means of both creating entanglement and discriminating between the four elements in a basis of maximally entangled, Bell-type states. Indeed, its observed performance as a Bell analyser would be sufficient to build a quantum state teleporter which would guarantee that the recipient would be left with a better copy of an unknown input state than any eavesdropper. In a series of numerical simulations, I investigate some of the practicalities that arise when using tomographic reconstruction techniques, including how to estimate errors, which measurements to make and what is actually the optimal reconstruction. In particular, I show that tomographies perform better when based on the results from over-complete sets of measurements. Finally, I discuss the important issue of how to compare two processes, particularly when trying to assess the quality of a measured process by comparing it to some expected ideal. Judging possible candidate measures against a set of experimentally and theoretically motivated